Repair your SUP fins! DIY

[@nioz85]

Great video guys, I've been searching for clear instructions on how to do this for hours and there isn't a lot of source! Good marketing as well : I just bought a fin box from your shop ;)

[@enduromite]

Great instructional video! One question: 11:20 wouldn't the 'gritty' side down adhere to the glue better than the smooth side?

[@jamesg4195]

I would think he was supposed to put the gritty side down...

[@vlaaady]

Great video. I lost the fin and cracked the fin box. Can I just glue the box along the crack?

[@goodfodder]

Would it not be easier to just cut the fin box out and simply glue the patch over ?

[@CenKyne]

For anyone reading this comment, its true, you can do that once or twice and its usually okay. A lot of folks do that. It gets fatter each new application since what you cut out isn't the whole adhesive patch.

[@jolienne74]

Hi great instructions my fin just came unglued, can I just re-attach it or do I need a new one? Also my handle came unglued as well, can I do the same process for that? Thanks in advance.

[@scottybeegood]

needed the CC as the sound is too low but this is a great tutorial on how to remove and install the US fin box

[@williamho161]

Thank you for this video!! Very helpful👍

[@carlopispico2560]

Hello, I need help. during my fin box replacemente unfortunately i have cut my sup in 2 points ( about 3cm of cut) around the old fin box shape. there is any tutorial to repair my inflatable board???

[@virtualcurbappeal8637]

Did you ever get this figured out? I also have leaks in my iSUP where the old glue attached the finbox to the board.

[@zefe3886]

@@virtualcurbappeal8637 Get a pvc bigger than the hole. Use the same process as above, bit with the pvc.

[@virtualcurbappeal8637]

@@zefe3886 Thanks. I did that and it seems to have worked😀

[@orlaperry230]

Can I use vinyl cement instead of contact cement?

[@pawelwiesyk]

Hey! Will polyurethane glue do the job?

[@ΔημήτριοςΓιαννακός-θ6τ]

Hello,what type of glue can i use?

[@Nonafragniere]

Hey, he uses in the video: LePage® Heavy Duty Contact Cement and recommends Stabond 2-Part adhesive (UK-148). Basically he says that for this type of work, contact cement glue works just fine. I will try this week when I glue my new fin :)

[@itsme6166]

Where can I buy the replacement fin box? Thanks

[@LevelSixInc]

www.levelsix.com/collections/2019-sup-repair-replacement/products/replacement-inflatable-sup-fin-box

[@54darbe]

Thanx bro

[@virtualcurbappeal8637]

Be careful using the heat gun folks. I just wrecked my $700 iSUP with it. :(

[@Jungle.D.OutDoors]

Thank you so much for this video

[@josimartaylor303]

I can’t find the pvc material 😤

[@LevelSixInc]

Our repair package includes the PVS to seal the fin box. www.levelsix.com/products/replacement-inflatable-sup-fin-box