Repairing 5/3-Ways Pneumatic Solenoid Valve (Cara servis Solenoid Valve 5/3)

This video show how to repairing 5/3-Ways function Pneumatic Solenoid Valve.
Please ensure to preparing the correct type and genuine replacement kits to make sure the quality of valve after servicing.
Please replaced complete seal kits set instead of broken seal only.

[@tfue3458]

Great lah... jd tambah ilmu.

[@creativemakers7765]

Terima kasih sudah comment gan.

[@mindojaya6342]

Bisa di perbaiki ya? Baru tau aku... sayang sudah pada di buang. 😢

[@creativemakers7765]

Bisa gan. Terima kasih sudah comment gan.

[@tricahyono9006]

Wah, sayang sekali klo d buang,, bolehlah dikirim k saya,, hehe

[@perspectivex]

Have you tried only replacing the rubber parts, or, only doing the cleaning? I mean, is it possible that just cleaning it fixes it? Or maybe just replacing a rubber fixes it? I mean, is the problem more "dirt" or more "worn parts"?

[@creativemakers7765]

Thank you much for your time in watching and comment on my channel, greatly appreciate. Depend on problem, sometimes valve do not working because of dirty problem due to air quality problem. If your air quality is clean and good, normally it mean the valve life time reachable so replacing the whole kit of rubber seal are recommended to fix it out. Hope above are cleary informed. Thanks again for your times and kindly help my channel improved by subscribing, like and share. Thanks...

[@perspectivex]

@@creativemakers7765 thanks for the prompt reply & explanation.

[@creativemakers7765]

You are welcome

[@sivakrishna7869]

How much pressure can be operated with this type of valve

[@creativemakers7765]

Thank you much for spending your time on my channel and comment. Please help me to improve my channel by subscribe, share and like. As we replaced all seals with the original/genuine seals from original manufacture, pressure tested prefectly work at 8bar without leaking and until today still work prefectly. This is same as the new valve which designed working pressure between 1.5~8.0bar. Hope above are informed and useful. Thanks again for your times. Take care and good luck.

[@sofyanuciha6713]

Coba pakai koil 0-24 vdc om biar joss

[@creativemakers7765]

Siap bos... dan tidak lupa sy ucapkan banyak terima kasih sdh meluangkan waktunya mampir di channel sy.

[@00308569]

this great. if this person told us what they are using thats white

[@creativemakers7765]

Thank you much for your watching and comment. Please support me by subcribe, like, share and turn on notification icon on my channel. You mean the white color in the small tube? That is a grease, we can get this pneumatic grease on pneumatic parts supplier. Hope above are informed clearly. Sorry for any inconvenience caused.

[@alejandroaguayo4287]

Any good solvent to clean it ?

[@creativemakers7765]

Thank you much for spending your times on my channel, please help my channel to improve by subscribing and like my channel. You may use cleaning solvent like contact cleaner such as WD40, gasoline is also good in cleaning but not suitable for sealing material, so you may only use gasoline to clean the valve housing or other parts that not containing rubber material. Hope above are informed and useful. Thanks again for watching.

[@jonnybro..9999]

where can i get the o ring of this valve

[@creativemakers7765]

Hello Sir, thank you much for your comment and visiting my channel, please support my channel by subscribe, like and share. You can order it from the valve maker or distributor. If your valve were original products from most famous brand manufacture, it is available to order parts and seal/repair kit. Hope the above information are useful. Thanks again for your times.

[@GoldLane-]

Semua nya di rendem itu gan? Punya saya sudah tidak narik magnetnya

[@creativemakers7765]

Direndam tujuannya untuk di bersihkan saja. Jika magnet sudah gak kuat untuk narik maka sebaiknya diganti saja. Selamat mencoba dan semoga berhasil! Good luck...

[@rahmattullah9751]

Kalau angin ya keluar kencang dari lubang yg kecil itu apaya yg rusak.tolong jawab mas

[@tongsampah9458]

Lubang yg mana mas?

[@creativemakers7765]

Terima kasih mas sudah reply, plis subscribe, like m share donk. Maksud mas lubang kecil itu yv sebelah mana ya? Pada umumnya valve rusak hanya di masalah seal saja. Recommed servis umumnya 3× (dgn syarat rusak ringan) setelah itu wajib ganti baru mas.

[@arbalmashuri939]

Kalau posisi damper skatnya tidak bsa menutup..cylinder pneumatic..tidak brfungsi..apa gra2..selenoid valve bermasalah??

[@creativemakers7765]

Terima kasih sebelumnya sdh mau mampir di channel saya. Mohon support serta dukungannya donk untuk klik subscribe, like, share serta di klik tombol notifikasinya. ^_^ Cylinder tidak berfungsi bisa di sebabkan beberapa hal, salah satunya solenoid valve bermasalah atau cylindernya sendiri bermasalah, kurangnya supply atau tekanan angin juga bisa menyebabkan solenoid valve tidak berfungsi. Coba lakukan pengujian secara manual. Semoga sdkt membantu. Terima kasih banyak lo bos sdh mao comment di channel ku, mohon di dukung donk bos agar channel sy bisa berkembang dan bisa bermanfaat bagi masyarakat kita. Ciayoooo... tetap semangat dan semoga sukses selalu, salam sehat, ingat protokol kesehatan...

[@arbalmashuri939]

@@creativemakers7765 untuk pengujian scra manual..dgn saya tekan tombol pda selenoid valve. Itu tidak ada prbhan mas?.gmna ngge

[@creativemakers7765]

Mohon maaf mas atas keterlambatan balasan dr saya. Ok, jk tombol manual juga tidak berfungsi kemungkinan besar adalah kerusakan pada solenoid valve itu sendiri ataupun pilot (untuk jenis solenoid valve pilot operated) itu sendiri. Solenoid valve memiliki beberapa jenis operated, salah satumya adalah pilot operated, untuk jenis pilot valve dibutuhkan tekanan angin minimal (umumnya 1~2bar tergantung design dari pabrikan) agar valve dapat berfungsi (baik dgn tombol manual maupun listrik/coil) jd pastikan pengetestan sistem valve tersupply angin bertekanan minimum sesuai instruction manual pabrikan. Tanpa tekanan angin minimum pada sistem maka valve dgn jenis pilot operated tidak akan berfungsi sempurna. Semoga info sy sedikit membantu serta bisa bermanfaat buat bos. Terimakasih banyak ya sdh mau comment di channel ku. Salam sehqt selalu... 🙏🙏🙏

[@ariffzakaria6028]

UTHM Pagoh ka tu?

[@creativemakers7765]

???

[@jumsah8554]

Izin dounload ya

[@creativemakers7765]

Terima kasih sebelumnya sdh mau mampir di channel saya. Mohon support serta dukungannya donk untuk klik subscribe, like, share serta di klik tombol notifikasinya. ^_^ Silakan bos... asalkan tidak disalah gunakan. ^_^ Semoga info sy dpt membantu. Terima kasih banyak lo bang sdh mao comment di channel ku, mohon di dukung donk agar channel sy bisa berkembang dan bisa bermanfaat bagi masyarakat kita. Ciayoooo... tetap semangat dan semoga sukses selalu, salam sehat dan ingat selalu protokol kesehatan...

[@kristianawangdarmawan3003]

Rendamnya pakai cairan apa gan?

[@creativemakers7765]

Terima kasih sebelumnya sdh mau mampir di channel saya. Mohon support serta dukungannya donk untuk klik subscribe, like, share serta di klik tombol notifikasinya. ^_^ Tergantung si gan, jika perlunya hy untuk membersihkan saja tanpa ganti seal bisa menggunakan cairan contact cleaner karena lebih aman untuk material berbahan dasar karet tapi jika tujuaannya hy untuk membersihkan dan seal akan di ganti dgn yg baru bisa menggunakan cairan pembersih apa saja, bisa menggunakan bensin atau minyak tanah atau apa saja yg mampu membersihkan sisa oil dan grease. Semoga membantu gan. Tetap sehat gan, terus berusaha dan salam sukses selalu. SEMANGAT.

[@aldyfebriansyahakbar162]

bang izin tanya kalo solenoid gamau respon dari push button tapi ketika dipencet manual dia bisa respon maju dan mundur, dan di cek tegangan di kabel merahnya nyala, ada tegangan 24 v ketika di trigger push button itu kenapa ya bang? mohon bantuannya terimakasih

[@creativemakers7765]

Terima kasih sebelumnya sdh mau mampir di channel saya. Mohon support serta dukungannya donk untuk klik subscribe, like, share serta di klik tombol notifikasinya. ^_^ Jika solenoid valve dapat berfungsi saat di test manual dan tidak dapat berfungsi ketika kita beri tegangan arus dan tegangan sudah dipastikan ada. Maka kemungkinan kerusakan pada solenoid/coilnya coba diganti. Semoga info sy dpt membantu. Terima kasih banyak lo bang sdh mao comment di channel ku, mohon di dukung donk agar channel sy bisa berkembang dan bisa bermanfaat bagi masyarakat kita. Ciayoooo... tetap semangat dan semoga sukses selalu, salam sehat dan ingat selalu protokol kesehatan...

[@aldyfebriansyahakbar162]

@@creativemakers7765 terimakasih banyak sarannya bang, pneumatik udah bisa jalan diganti coil yg baru

[@creativemakers7765]

Sama sama pak

[@roswitadewi9932]

Apa itu ya?

[@segararifin5500]

Repair macam repair kereta lembu.. pakai lah dua tangan Bro.. macam cacat aja.. repair kena ada explaination suara..kita bukan Pekak lah..

[@segararifin5500]

Repair pun main buang buang.. you out of the story.. pegang kamera satu tangan..buat kerja satu tangan.. belajar buat video sebelum masuk youtube..