My Lock Button on my Dodge Ram Key Fob has been acting crazy so I tore it apart and this is what I found !
Пікірлер: 49
@mrjackpots1326 Жыл бұрын
I hope whoever designed the fob is no longer working in the automotive industry.
@mrficks18382 жыл бұрын
If you need to find these ''metal discs'' because you lost them they are called 'dome switches' and/or 'PCB Surface Mount Tactile Membrane Switches'. Also its easier to secure these discs directly to the board... many have used 'magic tape' for this but electronic glue around the outer edge may work also. Thanks for the video Redneck Mfg.
@loganperry8040 Жыл бұрын
You’re the man. Been looking for what these were called
@robertcarrillo413410 ай бұрын
Where can I find this switches at?? I need to replace mine asap as to they don't click anymore like the video shows lol. Mine aren't round anymore they r flat?
@alanhannah51139 күн бұрын
In Canada it's 460 plus tax to replace lol
@fruiz1204 Жыл бұрын
Thank you, sir. I was trying to figure out why mine wasn't working. I had changed the battery , and after watching this, I saw that the metal disc was on another part of the control.
@pwest37323 жыл бұрын
Yup, you did right! Have done the exact same thing several times. Actually not a bad idea to do occasionally anyway....hmmm. Easter project.
@cedarandsound11 ай бұрын
Tom's Key sells replacement key fobs with a programmer for 100 bucks, which is half of 200 but it's still more expensive than fixing the fob itself like this.
@meaneydanielp Жыл бұрын
Quick fix: Tape! Disassemble your key fob. Take off all the little metallic domes. Figure out exactly where they need to contact the board. Then tape them down to the board. I tried super glue at first. The hot glue. Then I found your video and figure out I was doing it all wrong. Tape is the quickest fix!
@oxygen45410 ай бұрын
What kind of tape? Thin transparent like you use to wrap Christmas presents?
@BoydWeaverling Жыл бұрын
I found the replacement buttons on EBay for $10 bucks. No re-gluing.
@The_Mavs_Are_Bums2 жыл бұрын
I had changed the battery and did this and it still doesnt work on my key fob. Idk what else the issue could be
@arlenbradeen648524 күн бұрын
Thank you, had the same problem. Hope it works for me also
@Paulman503 жыл бұрын
Nice, getting it to work 3 times 😊. My jeeps key fob battery went flat and the dealer wanted $100 to pair it back to the car and $10 for the battery 😠. I showed my discussed and he charged me 50 bucks.
@darryladams519 Жыл бұрын
Happened to both of my 2015 3500 keys, both unlock buttons. I ordered two fobs on the internet and gonna swap the rubber piece that the discs are so called secured to
@spacewhite17th33 Жыл бұрын
Thanks a lot this really works, this saved me a lot of time and money 💰
@joeroyalgarage79953 жыл бұрын
Right on.... good as new!!!!
@robertcarrillo413410 ай бұрын
Where can i find these round dome switches mine are flat and they dont click like yours does on video
@Redneckmfg10 ай бұрын
That I'm not sure of?
@jhscheppele24482 жыл бұрын
Key fob is 60.00 at dealer, programming 75.00 at dealer. Highway robbery. But “ legal “?
@MrDwaynePoff2 жыл бұрын
How's the silicone holding up?
@reinaldo3657 Жыл бұрын
Muito obrigado
@oxygen45410 ай бұрын
Great video! Horrible design. I cleaned my disks and applied Krazy Glue because that’s what I had at the time… will see how long it lasts.
@bradgriffiths274510 ай бұрын
My fob is doing the exact same thing. It's 300 dollars for a new one
@stefani47372 жыл бұрын
Thanks
@Redneckmfg2 жыл бұрын
Welcome
@billwoodruff1675 Жыл бұрын
The silicone does not hold. Had sane oribkem within 24 hours
@xw72392 жыл бұрын
Very helpful, thank you. #redneckstrong
@talarico196810 ай бұрын
Thanks Bro, took mine apart yesterday and was wondering if those discs came loose! You think a dab of honey would work? 🤣👍
@coryhenry1291 Жыл бұрын
Having this problem as i watch this
@arnoldhurd10976 ай бұрын
I found the same problem with my 2015 dodge dart. AND. That's the way I was going to fix my problem. Good to find someone who thinks like I do. Just hope it is a long time/ permanent repair.
@jimkeeling2 ай бұрын
Now there. Both keys went out same time. Will try you advice! Here is hoping
@georgemtonga18847 ай бұрын
Thank you so much sir for this video, I just managed fixing mine too. Great job sir
@El-amigo357 ай бұрын
Nice job , good idea!
@RustyGlovebox3 жыл бұрын
Nice job getting all those contacts clean and back in place. I've run mine through the washer and dryer a couple of times with no problem so far. Every time I do it , I know it will be the last...ha ha
@billarenz2719 Жыл бұрын
I had the same problem with my key fob on a 2014 Ram Bighorn 1500 where the horn starting honking randomly, I ended up needing a different key fob after taking it apart and cleaning just like you did in your video. I think the p.c. board was the cause.!!!
@KeionaWillis-vs5lf Жыл бұрын
Happened to my Dodge Charger and tried this still can’t get in the car. Ordered new fobs prepaying the new silicon works with the old circuit board 😭
@HTSS8 Жыл бұрын
Now you can search how to make your truck use those 4 other contacts. Top Right of those is the Remote Start. Not sure what the other 3 are, but I'm sure the $200 programmer that someone makes to "hack" into the Ram computer, can make them do almost anything that is electronic and controllable by the truck by remote.
@larrylazure42886 ай бұрын
In Canada 342.00 from dealer plus programing
@brianmorrison9937 Жыл бұрын
I accidentally removed the emergency key lock mechanism and it flew apart and now I can't figure out how to put it back in.
@richardcoleman39304 ай бұрын
Just found this video. RTV is a great idea, because you are very correct in the fact that the adhesive must remain pliable! Superglue or epoxy will prevent that steel disk from being able to "pop" when the button is depressed. Might add, if anyone here is attempting this, pay close attention to the direction you place the disc onto the rubber button as there is a top and a bottom. Thanks for the video!
@Prime.-time4 ай бұрын
i have always used superglue...quick fix and it last over a year and i re-apply when it starts acting weird again
@azuqui8 ай бұрын
Did your key fob have the little screw where the valet key is...?
@Redneckmfg8 ай бұрын
Yes
@russellmcknight72262 жыл бұрын
$254 plus 90 to program,I was able to fix mine the same way
@Redneckmfg2 жыл бұрын
oh man thats crazy what they charge...
@freehuman480 Жыл бұрын
How did you take it apart
@Redneckmfg Жыл бұрын
pull your skeleton key out of fob and insert it on the end and twist the key between the two halves it will pop the case in half
@oxygen45410 ай бұрын
Mine had a small screw that had to be removed once the key was pulled out