Repairing a Toyota Matrix Door Handle & remove door panel

[@fredbradley5242]

I watched this video before trying to replace the driver's rear door handle on my 2004 Pontiac Vibe. I did everything in the same order as this video. I had the door handle installation completed in less than 45 mins. This is an outstanding how to video. Thank you so much Mr. Chan.

[@hansolo5330]

Hi guys just wanted to say I appreciate both of you for this video!! Just replaced my door handle with the huge help of your video! Hope y’all are doing well since posting this video eight years ago! Thankyou again!!

[@richardmitchem9695]

Great Tutorial! Taking my time, I was able to change a rear door handle for a 2004 Matrix in just under 1 1/2 hours...I tended to triple check my work as I didn't want to have to redo it - so I'm sure someone more experienced could have cut that in half. Only used four tools, the Torx screwdriver/bit, standard and phillips screwdrivers and a small crescent wrench. Local Toyota dealership quoted me $300 parts/labor - I picked up the handle at Amazon for $9 and completed it, with the help of your video, for a major savings. ...not sure if I owe you a commission or what... Thanks!

[@kristopheraries1573]

Richard Mitchem Can u send me the link to where u got the Toyota Matrix door handle? I have a 2005 Toyota Matrix and my door handle just broke off from the rear side of the driver.

[@markgreenbaum9680]

2004 Pontiac Vibe (same basic design). I already had to replace the driver's side front handle a few years ago so I had some background going into this. Your tutorial was excellent start to finish. #30 Torx screwdriver/bit with extensions, #2/2P cross tip screwdriver, and a #10mm socket. Done in about an hour.

[@stevelam66]

Thank you so much! My son broke my 2003 Vibe's door handle and I came across this video. It seemed a little complicated at first but I just followed every step and was able to fix it in a little more than an hour. Save me hundreds of dollars!

[@esniqui]

This was excellent. I would not have been able to do it without seeing this. However, it should be noted that if your car has manual windows, the crank has to be removed before the panel can be. This requires a special tool to remove the clip on the crank, which I did not have. Removing the clip with knives and screwdrivers is quite difficult.

[@vman08840]

Xxx v 1

[@ontrakphil]

That was a major help! I would not have gotten it without the part about dropping the door latch, you're a lifesaver.

[@michaelcooper2756]

Great video, just replaced both sides. The only thing not covered was removing the window crank. I struggled a bit until I noticed the ring clip. It was still tricky to remove.

[@pastordonperryporter]

my handle did not break, just vibrated lose after a dozen years on the road. I am not mechanically minded and this was most helpful for me! Thanks!!

[@xerxesrigon7950]

thanx for the video used this tutorial for my 04. btw not not sure if it was mentioned in the video and it wasnt in the description but the torx head is a size t30

[@tonyromo6028]

Thank you very much I really appreciate you taking the time to record it. Got it done thanks to you.

[@Freecarvin]

Awesome video! Changed 3 handles in a little over an hr with your help bro. Thx!

[@NukeDarfur]

Thank you for this. I just replaced both rear door handles, and I found that you actually don't need to remove the first door handle screw, just the second one. I removed them both on the first door, and the entire assembly on the inside of the door came off, which was kind of a pain to get back on. On the second door, I only removed the second screw, and it was a heck of a lot easier.

[@samb4577]

Just replaced mine. 5 years later and we're still getting value out of this video, thank you!

[@mitch58100]

Thank you! I have been searching most of the afternoon for a video for this exact handle. I have a 2006 Toyota Corolla S and the screw that holds the cover in place was loose. When my daughter went to open the door, the cover, handle, and retainer fell off. Your video is exactly what I needed from taking everything apart to putting the handle back in and tightening the screw to hold the cover in place. I didn't even need new parts as the ones I had were all good. 5 stars to you my friend!!!

[@tomshiba51]

Thank you for the video. I replaced one of my front door handles, but found that the rear handle replacement was more involved. Your video cleared it all up for me.

[@alvinbigdog]

Glad I found this. The bolt for the window slide was hanging me up. Once I got past that with the help of this vid, it was easy. Thanks

[@vroom362]

GREAT video! Now that I've seen you do it I at least have an idea of what to expect. We've got 2 handles to replace; both driver side doors (front and rear). I imagine the front door with the lock will be slightly more complex, but I'll/we'll give it a try. Given 62K views and growing tells me this is extremely common issue. Cheap plastic handles. Based on previous comments I'll just need to find the parts at my dealer - I won't have the patience to customize an ill fitted aftermarket part. Please continue posting other helpful tips and ideas learned with this vehicle periodically. THANKS!!!

[@tomstout2952]

200K miles on mine and the only thing broken are the handles on the passenger side. Thanks for the video. Quite helpful.

[@TheCABLEGUY33]

Thank you so much!! This was awesome. I was able to do it yesterday myself by just watching your video.

[@dencioz55555]

Thank you for showing us on how to replaced door handle for Toyota Matrix. Mine was a Rav 4 2011 and it’s the same procedure as shown on this video. The handle won’t last long and you have to replace it if someone has the same part because Toyota has made it so cheap. They need to have a recall on the handle.

[@richardwill178]

Thank you so much for the video. Replaced mine in under an hour. Great detail on the blue lever and getting it in the notch. Only tools required are #2 Phillips, 10mm Socket, T30 Torx, and some extentions.

[@hspauldi]

Thanks for the details! Now I can make sure I have the right size Torx driver before I take the door apart.

[@NajRellim]

WHAT DETAIL about the blue lever??? The video has a blank black screen right where he discusses the blue lever and how it should work in conjunction with the door handle. Why the mystery? Did he have trouble getting them to work and so just cut that part out?

[@kylepiggins3064]

Thanks so much for putting those details, I work at O'Reilly Auto Parts in this really helped us out with a customer!

[@jbuelol5628]

Whoa! I could never have done it without you. Like you say, it isn't hard, for sure, ONCE you knew what you were doing!!!! And you showed me that. Thanks you.

[@dominikt1901]

The only thing I’d add is to mention that the little tab that connects the handle to the spring needs to be behind the handle as you insert it. The first time I replaced the handle it managed to not go underneath and the spring was not connected to the handle. Thankfully my dad pointed out the mechanism after I made the mistake. Otherwise, great video!

[@jayjieyuan6951]

Thanks a lot for this video! I have successfully replaced the left-rear outside handle on a 2005 Pontiac Vibe! I really appreciate the info in this video. It gave me a lot of confidence in my planning for the task. Keep up the good work! I hope you will produce more videos like this!

[@Ghostmanriding]

An excellent video! I bought an after market door handle and it was a very poorly cast part. I had to file it to get it to fit.Stick with the factory handle.

[@redbrandonk]

Thanks for the vid. It worked exactly the same for my 2004 Matrix on the rear passenger side door.

[@JohnSmith-sf8gj]

Still useful after 5 years published. I just broke mine this morning in the freezing cold, now I know what to do!

[@RubyOutdoors]

Thank you! Fixed both of my rear handles by watching this video. Very helpful!

[@vikcheban923]

27,000 VIEWS! That tells me ALOT of people's handles are breaking. I have to replace my fourth one... not even kidding. Each from a different door. Come on Toyota! (at least the engine still runs great though)

[@davewilliams5431]

Thanks for the video. It made this job easy. Especially important is the part you include on getting the fork on to the pin. The only thing I would add is that if you don't get the fork on to the pin, then the outside handle will feel like it works but it won't work. The inside one will still work though.

[@josephseelye4473]

This is great! Watched the video and went right to the door. Had it done in less than an hour. Thank you.

[@static_Tricolor_camry]

This the only useful and most helpful video on KZbin although I have an 07 Camry the process should be the same for removing the screws plug mechanism and bolts inside the rear door panel

[@boogywstew]

I have a black Zildjian "T" shirt instead of a white Sabian "T" shirt but because the two families are related, I feel I would be able to complete this repair. Oh yeah ... Great video!

[@tekis68]

Great video, I had my rear door handle replaced and it didn't get fixed properly, and the door was not opening from outside, so I got it working now.

[@chuyscon]

Great video tutorial. Thanks for helping me replace the door handle flawlessly.

[@josecoria2723]

Good all is done your a good instructor thankful and grateful stay blessed y’all from our great family in the sky

[@danielwilson7308]

You make this look way too easy. I'm about to embark on this project myself & if history has taught me anything it's that what takes a normal person such as yourself maybe 30-45 minutes to complete will undoubtedly take me hours so wish me luck! Btw thank you for your military service! (saw & heard the dog tags)

[@danielwilson7308]

Update: Just did this in 20 minutes. I'm still in shock at how easy it was thanks to your tutorial. Seriously, thanks a million!

[@joshdenhartog9803]

Just had to do this exact same repair. Thank you very much for the clear directions.

[@jaxpack1]

Nice video, getting the panel back on can be a real pain, thanks for not glossing over that.

[@shwnshts9469]

🤘BEST TUTORIAL IN YT for a second I thought you were this cat I knew in Korea Kellen Bean!

[@Cheshirekat.]

dude you're a lifesaver this was ultra helpful

[@varietytubechan]

Glad to be of service!!! :-D

[@passedhighschoolphysics6010]

WExcellent video. Your instructions could not have been any better.

[@juliocastro6957]

Thank you it is really helpful video on how to replace door handle..its has all instruction that i need

[@char40co]

This is a really good video. I was looking for one like this and I found it, Thank you Chan!

[@tadduet]

Outstanding how to video! Great work!

[@Reg1564]

Excellent video, followed the steps and fixed mine perfectly. Thank you!

[@donsharp3561]

great video thanks. only problem I have is a distinct lack of power windows! Thankfully I know old school repairmen who keep this sort of stuff lying around!

[@jamesmullen2244]

Thanks for this, I was able to replace the handle on my 2004 Matrix. However, now the remote will not unlock the door and neither will the front power locks. Any idea what could have gone wrong? I've plugged everything back in.

[@jamesmullen2244]

The window still gets power, it seems it's just the power lock that's not working.

[@NajRellim]

I followed your instructions on my 03 Pontiac Vibe, but the door handle will not open the door. The mechanism pin is situated between the blue forks, but something must be missing from your instructions regarding the handle connection to the lock mechanism.

[@genediegelman406]

Great video..thanks for all the detail including the written words,.. that helped!!!

[@elionolson]

Excellent Video. My friend have been making fun of my car (and of course couldn't get in the car!). Thanks for the excellent work

[@marcelmary2832]

This is exactly what I needed to know. thank you for doing this, you just saved me about $500

[@campingaus]

Was struggling with the door mechanism on my Toyota kluger, this video was just the trick to see how it works and hook it back up correctly.

[@daveneville3421]

Nice video! Going to replace the front passenger side door handle and will have to deal with the key lock. Any gotchya's I should know about?

[@mrhabanero1]

Excellent video. Straight forward. Very helpful. Thank you.

[@timt695]

Really like the video! But would like to point out one thing... That thing on the inside of the door is not an ash tray, its the inner door grip so you close the door! Lol

[@hwmmat56]

great, I fixed the rear door handle on the passenger side with no problem. The other side, the locking thing came off and now the door handle won't connect to the locking thing. I put the locking thing back on too. What can I try?

[@timayscott8450]

Thanks for spending the time making this mine just broke

[@ogyouwannabelikeme]

What handles though? I bought some off of Amazon and they didn’t have a spot for a screw on the smaller end of the handle

[@SBFRAZI]

thanks for the instructions. my grandkids broke all three passenger door handles . Thank God they don't drive. that handle would probably be broke as well. They don't make them very strong do they? Oh Well. you saved me cash. Appreciate it.

[@larrysnyder9239]

getting ready to change both door handles on a 2003 corolla, thanks for the info

[@VicnLel]

Thanks for posting this, you saved me a ton of time. God Bless!

[@mrtrick83]

Looking to install some new speakers myself. This will really help. Thanks!

[@axeljohnson1523]

What size screwdriver is used to remove the screw on the stationary side of the door handle?

[@axeljohnson1523]

Maybe my screw is stripped

[@gregcoles4341]

she did a great job on this recording!!

[@warrengee7816]

What type of star screwdriver is needed?

[@533063]

My sliders for the front doors that hold them open seem worn out such that the door swings wide open without resistance. Do these wear out quickly, would I be smart to replace with used or should I just get new ones. I take it that the job might be easy but I don't see a video for this. Perhaps, because I don't know what they are called.

[@chanceroberts4573]

Helped me thank's just wish the back doors were that easy.

[@rickyg4800]

where did you purchase the handle?

[@kowalityjesus]

I wish Toyota had been as meticulous with its door handle polymers as it was with everything else on the car.

[@jorgiangel]

Thank you very much for the video, it made me save a lot of time

[@RacingMan76]

Thank you very much. Made my installation easy.

[@Alguna27]

What size star key? Just got my part.

[@dianasandoval5448]

Thank you for the video I just changed my handle 😊

[@brianvaughan9417]

you are the man thank you for making this video!

[@jolejar]

You saved me money! You rock!

[@BenjaminGonzalez-wv3cy]

Thank you for showing how to do it...

[@justme0411]

I have the same issue. My question is...what if you cannot get the door open? Is there a way to remove the inner facing to access the inside in order to replace the door handle? Hoping someone out there can help as this has been an issue for 4 years now.

[@leadwithliberty8743]

Great Video, now all I have to do is do this 4x

[@varietytubechan]

Glad to be of service. Please thumbs up and or subscribe, it helps a lot. Thank you for watching.

[@adshelpfulvideos2622]

Thanks man. The video really helped a lot!

[@brianmef71]

It would have been nice if you would have said what size torx bit to use.

[@bradjbourgeois73]

I just changed my rear handle, but having problems with the lock on the front one, star screw isn't lining up!

[@simonevarnes1597]

Any idea how to fix the handle when the child lock is on and door handle is completely broken off from the outside???

[@DM-jn5pf]

Thank you for your help sir. Very much appreciated.

[@krystalwinn1472]

Thanks for sharing. This will help me greatly.

[@bxnt143]

Thank you this helped so much ! Life saver 😃

[@CeechHsu]

thank you for this video. it helped a lot.

[@joesanchez2296]

Very helpful. Thank you.

[@killshin]

Thank you. This helped a ton!

[@keithreed3862]

Great video! Thank you!

[@GamingItOldSchool]

This was quite helpful thank you!

[@lonnienrena]

Can you do how to replace driver side mirror. Thank you

[@snowman6512]

Does anyone know whats the part with the blue thing attached to it called

[@Morgus79]

you helped me a ton with you video thanks so much. :D

[@rainer415]

Thank you it really helped me.👍👍👍👍

[@cmd247]

THANK YOU! 6:01 saved me!

[@tonycotta31]

Exellent job on explaining job but you dont have to totally remove screws just lose is good that qay the inside part dose not fall apart Thank You .

[@dt1mdlara]

Thank you for sharing. God bless.