Repairing a wobbly or loose stem on Zendrian ZX-9 Electric Scooter

I'll show you how to repair a wobbly or squeaky stem on a Zendrian ZX-9. This is a side effect of bolts and screws becoming loose over time and is, fortunately, a quick and easy fix. I'll even show you how to fix it semi-permanently!
These instructions also apply to:
TurboAnt X8 loose stem
TurboAnt X7 loose stem
Blackhawk loose stem
Vdeoi loose stem
Eskuta loose stem
And probably some more as this scooter body is shared among these electric scooter brands.
I recommend blue Loc-Tite, which you can buy here: www.amazon.com...
You will also need a metric Hex Key set, here: www.amazon.com...
And Torx Key set, here: www.amazon.com...
Or, if you want to get this job done fast, use a bit for your electric drill/screwdriver: www.amazon.com...

[@AlexDarlow]

Tightening the black screws with a T25 drill bit 100% fixed my Turboant X7 Pro, thanks!

[@KidKraine]

I tried tightening everything still a wobble..

[@k1r1ll11]

Sane

[@blatantshan]

means ur screws have bent the metal

[@cookingwithskip6553]

Man, could you do one for a Jetson Bolt? Same problem with the wobbly stem...

[@ThePerceptivision]

so my latch gets kind of loose , is there any way to fix it ? My scooter has folded on me while riding , id like to know if you got any tips for this

[@Zendrian]

That is a dangerous condition, I would definitely recommend trying to get this fully resolved prior to riding again. In most cases there is a "set screw" on the latch that - when adjusted - will determine how tightly the latch secures the stem. For Zendrian scooters it's on the chrome metal latch piece and is adjusted with an allen wrench. To properly set it, lock the stem in the riding position, and tighten the set screw until it feels 'finger tight'. Then check that you can still use your hand to unlock/lock the stem. If it's too loose, tighten the set screw further, but if it's too tight then back off a little. You can use some BLUE colored "Loc-Tite" on the screw to prevent it from working it's way out over time.

[@kennethclare]

I have a rascal 600f around 2007 mfg steering is loose can you tighten up steering?

[@rodevz7815]

Does this work for the mi scooter pro 2?

[@almightyyes8892]

Hey I was wondering if you know got to fix a bent stem adaptor on the front fork! It’s bent and it makes the stem lean ..

[@jacobh5265]

Can u help me fix the back fender it's wobbly

[@demon1k746]

Hello, how do I remove the steering wheel bearings?

[@Zendrian]

Once the stem is removed, you'll need a bearing puller tool because they are seriously jammed in there. Not recommended unless you are replacing them

[@edaj2011]

I need a whole new one

[@matthewwheelis5926]

Looks like yours is still wobbling?

[@saugatchaudharyyeahboy7117]

Is the same for gotrax gxl v2?

[@kingsxxx814]

If you don’t fix it will it break isit risky to ride

[@Kdoogan09]

I’m not sure but my scooter is a pieace of shit it’s always wobbly no matter what it should be fine for yours no harm