Scooter not charging 🤔🤔🤔check this first as a Quick fix to get you going 👌

[@prioritytarget7157]

Three days I've had this thing. Thank you!

[@epicfightsuk]

Thank you bro, I was about to pay £35 for a diagnosis, luckily I saw your video first. Really easy fix. 20 mins £2.99 new fuse job done, no more 30 min walk to work 😎

[@LK187]

What scooter is it?

[@sarahihrig932]

*Great **Latest.Bike** Scooter ! I have had it for almost 2 years now and it is still working great so far! Brake and acceleration are really smooth!*

[@kwamemajor6958]

Hey bro how is the battery?does it stay for long or you have to replace it

[@OregonCrow]

wut

[@swat__sas1177]

And I am an electrician and it’s fused for a reason to prevent fires so if your house burns down that your own fault, the company said send The Scooter back, you’ve decided to keep it so if your house burns down that’s down to you. God bless you

[@swat__sas1177]

Because if there’s too much current going through the lithium battery, you’ll have a lithium fire, and they’re hard to put out very hard to put out

[@miguelfomt7387]

then u send him the money cuz no one wants to pay like 600 dollars to ship a scooter on a plane or some were else

[@pentiuman]

Exactly! Thank you for a sane response. At the very least, the guy could've first just replaced the fuse w/ the same. Then, if that blew in less than a few days, maybe go up to a 7.5 or 10 amp fuse. But no fuse at all, surely couldn't burn down his wooden shed w lots of batteries, right?

[@Danny-d7l]

My pure scooter won't turn on it only turns on when charger is in but does nothing then goes off any advice on a quick mad max fix just tk get me about plz

[@Fantaman900]

Just replace to fuse, chargers can fail. Fuse can protect it from short circuit. The fuse amp should be slightly higher than the charge amps. In case of over charging or short circuit your battery can and will burst into flames and put your home in danger of burning down. So I would not bypass any fuse.

[@thesolojourney8955]

Where do I buy a fuse and how to install it?

[@markjordan]

Any B&Q or Home Depot store

[@iikissmylazerll3680]

What’s a fuse and how much???

[@filiyy_3855]

Just put a drill bjt in does the same thing

[@santodarienzo9801]

99⁹p 99⁹is 3w 05⁵þ⁵⁵ťy⁶⁶þý⁶⁶⁶6⁶⁶⁶⁶⁶⁶⁶⁶⁶⁶⁶⅞⁶⁶⅚⁶

[@impressivetalent]

Appreciate the video, very hands on. I dissected my daughter's scooter, hers you unscrew from the bottom. I couldn't find a fuse but I found a bunch of corrosion. I guess the actual battery has issues. HAH even a few screws were all orangey yellow with corrosion. Love how you presented this video, wish our problem were that easy to fix.

[@cameronharvey4391]

😊

[@Aquamarfirst]

Thank you for this video, I had the problem on a brand new KUKIRIN G2 MASTER 2024, in fact the charging wiring was not connected inside the deck. Thanks to sharing your experience, I was able to avoid the return costs as well. What a time saver, a big THANK YOU 🤩

[@MrBoriqua2000]

You definitely need the fuse. If the charger really protects from over voltage then the fuse wouldn't have broken to begin with. The fuse is there to protect the battery and you removed that protection. Good luck.

[@RowOfMushyTiT]

The logic in the video is so flawed, it's like saying you don't need a seat belt because you never crash.

[@vickykenny1328]

The fuse has notin got to do with protecting the battery man you havent got a clue ... even if the fuse blows all u need to do is put tinfoil or a copper wire around it n it will be perfect again so it has noting to do with protecting the batery if just gives the battery power

[@RowOfMushyTiT]

@@vickykenny1328 Go stick your tongue on a 9V battery to understand.

[@khalildosso4072]

@@vickykenny1328 all imma say is you are wrong.

[@iammrwack]

​@@vickykenny1328 :-: I disagree.. Just like cars, AC units , horns.. If used it blows and it no longer works.

[@gabrielgaby5840]

Hello Mark, thanks for your Video, on Charger & Fuse, ...what I want to know is, how do I test My Power Wheel, using the 3 Cables, which one do I test on, .. I have, Green, Blue, and Yellow. Thank you.

[@christinebouquet-w8m]

This worked for my hover alpha -1! Thank you!!

[@lt.ripley1590]

Hello need some advice. I had a little shopper mobility scooter and maintained it myself for three years. I have just finished paying off a greenpower scooter. Since day one I had problems it looked lovely but a few screws were rusty. ;Anyhow within a few months it wouldn't charge. The charger was on green and it was empty. I had in total five men out to fix it. Nope they made it worse. I eventually got four new batteries out of them but that wasn't the answer anyway.They tried to palm me off with allsorts of reasons. However after the new batteries and a new charger port in the scooter it worked for a while now its doing the green light thing again. However if I can get the horn to work and the front light I can charge it get the charger to go red while it does. By the way I bought a spare one they were shocked I knew what charger to get. So the indicator had a little switch which basically boinged off so they donrt work now. THe seat is loose so many faullts. However it needs to work . Any ideas why the horn won't work and the front light then when I eventually get the horn to beep I can charge it then.

[@nanettebarling1222]

I was thinking about omitting the fuse with a "push to reset type" of breaker. Then you don't need to open the battery box. Better safe than sorry.

[@ridewithandrei]

Same problem, aplied this fix, works like a dream

[@PatRiot-]

a $3 fuse isn't worth the fire that it can and will cause. If you think it can be removed without issue- it shows you truly don't understand the purpose of this fuse. It's not a game....it will burn down whatever the scooter is in with a flare-like fire. Think of your family and neighbors before introducing a wild fire hazard this way.

[@davidotto7666]

Hey bud you really helped me a lot you help me diagnose my charging problem thank you I really appreciate it everywhere else I asked nobody can really tell me they just want to charge me a lot of money thank you but I appreciate it and I know it's the charger

[@AdamMclardy]

It can be there to prevent over discharge as well which kills battery s DEAD

[@Dajlec]

My zero 8 came with a 50.4V charger which is able to charge the 48V battery to a maximum of around 74%. Why? Answer: note that the maximum (100%) charging capacity of 48V battery is not 48V but 56.4V. To charge your 48V battery to 100%/56.4V you would need a stronger charger (e.g. 60V). Providing a weaker charger is a smart trick some manufacturers use in order to prevent their buyers from overcharging the battery (keeping your battery charged above 30% and below 80% will triple the battery lifetime). The light on the charger will turn green once the current stops flowing, in other words, there is no more difference in the potential between the charger output and the battery. This only means that the battery charged to the maximum capacity of what a CHARGER can provide and this is not necessarily the max capacity of the battery itself. So if you see a green light on the charger, indicating that the charging is finished, but your scooter only shows 4 out of 5 bars, check your charger's power and the voltage reading of your scooter. They should be similar (e.g. for 50.4V charger your 48V scooter should read 50.1 or 50.2V when charged to the max). Search the internet for "Battery pack voltage comparison charge".

[@crouchingtiger5431]

A 48v batt 54.6v is over 95 percent

[@FromTheGroundUP627]

A 48v battery charges to 54.4v

[@WillyFPV]

Good job Mark! I agree with you. Sometimes you just need to dive right in and do it. Hope it dont give you more problems.

[@donswain8972]

Hello

[@pelvishakerg271]

I also have the kaabo scooter.. just wondering.. lights work but the rear are off? How do you check it? So side board and front lights work but not the rear facing .. hope that makes sense.

[@zillevillevlogs7035]

Where is the fuse located

[@5272paul]

Do you think the Chinese would put a fuse in if it wasn’t needed? Sorry but I don’t agree with your advice on this one

[@bilelkaafar7115]

What the voltage of kaaboo wolf warrior 11 pro ?

[@daviddpass]

What others said, please use the fuse!! Also - I get nervous seeing you tighten the screws back in with electric screwdriver. It is very infrequent you will need to retighten the 10 screws, but depending on a power drill can damage them very quickly. Would say use a handheld screwdriver to avoid threading screws.

[@jaycarl1562]

You mean cross threading. Removing the screws with a power drill is fine but installing them to torque is not a good idea, you are very correct in that.

[@jeffreyepsteinsclientlist6714]

I just picked up a Zinc folding electric Eco Scooter (ZC06805), but it will not charge. The light on the charger pack stays green, does not turn red when plugged in. The scooter powered on out of the box, but now will only turn on briefly after I manually scoot around for a bit, showing (what I think says) "E5" on the display, but then quickly dies. Can anyone help??? PLEASE!

[@markali-gilkes8517]

I got a choas & solor E-scooter. How do u tighten up front stock with bearings.

[@bilelkaafar7115]

So I keep one fuse ?

[@nukenridge4921]

Do all scooters have a fuse .I checked all in the back and all wires are good only thing was one tiny grey wire not connected so I reconnected it..But it does not turn on at all.i had to fixed accelerator with spring tension on accelerator left side with trigger.i don.t know if my daughter followed proper charging method for winter prep.What wire should I check first ??

[@WildKardZ]

Thank you so much I’m going to try this out on my scooter and see what happens I’ll reply back in the comments to let everyone know that it did or didn’t

[@quincylockett7846]

Well

[@prodARDIIS]

@@quincylockett7846 battery exploded. he died.

[@shannonmcglynn55]

@@prodARDIISThis is why our world will fail sooner than later. Comments like that ⬆️ The sarcasm on this planet is enough to make you explode.

[@QuynhAnhHenrik]

I guess the wires are connected directly to the battery. Removing the fuse means that if any conductive material (water, piece of metal etc) gets to the charging port it will short out the battery and everything going BOOM! Just put a fuse there...

[@ianmcdougall9628]

So, all I need is this fix plus a power bar with surge protection between the power source and the charger?

[@errolljones8432]

Great man you are great video thinking 10 mini hope will be much lighter. And not as heavy

[@jamiehallam1876]

Thanks dude just fixed a wired e-350 saved me loads of money and time literally how I get to work 👍

[@marcotte-kristian1556]

Hi Mark, good videos. I've repaired my won't Skywalker 10h lots of times, but the last problem I've had no luck. The battery charges, I turn on and the volt meter counts down very quickly from 54 to fade out at around 30. If I plug into the charger, the scooter can power up, but remove the charger and it counts down again. There is a key switch. It's also been sporadic, sometimes good and without moving it the problem returns. I pulled the wires out and checked the battery leads.... But as I said the scooter powers up if plugged into the charger. I'm thinking it's the battery management system that will be in the battery, or a faulty cell maybe. Just wandered if you'd heard of a fix.

[@cameronharvey4391]

I've got exact same problem

[@mad-pit3832]

Same here, did you find a fix??@@cameronharvey4391

[@nehemiahcuevas16]

I have a Widewheel W6 with the same exact problem.

[@onielramos6733]

Hello. I need help. I have a zero 9 scooter that won't take a charge. My scooter sat for awhile without use and the battery dropped to 21.6V, I removed it and had it checked out and the technician was able to charge it up to 51V. I took it for a ride and when I tried to charge it the charger stayed green. The battery is reading at 46.3V currently and the screen shows the battery is halfway. I tested the charger itself and is pushing out 54.6V which tells me the charger is fine. When I plug the charger to the scooter it turns green showing me that the battery is powering the charger, then when I plug it into the wall outlet it just stays green when it should be red. I tried your video and opened up the scooter again to try and find the fuse, but I don't see one. I've tried to research it and can't seem to find any information on whether or not this Zero 9 has a fuse. Please kindly provide some insights below to help determine the problem and how to fix it. Any help would be much appreciated. Thank you! 1. Do you know if my scooter has a fuse? 2. If so where is it located? 3. Is there a reset button to reboot the scooter? 4. What could be the issue it won't take charge when I witnessed it first hand take on a charge when the technician attached his battery charger to increase the BMS to 51V?

[@janenelson4045]

I have a kugu kirin e.bike...power turns on but onky 2 out of 4 charge lights come on..tried charging, never went beyond 2 lights and charger stays on green. Thought was a charger problem, bought new one same problem, then i thought battery life ended but if i life back wheel up and turn throttle it whizzes around no problem.but if i get on v bike it comes to a halt. Do tvwant waste £200 on a new battery..im 63 female shall i try replacing v fuse?? Tku jane

[@bilelkaafar7115]

Brother very nice video ❤ but what the fuse of kaaboo wolf warrior 11 pro I mean the voltage

[@Muri_Moto]

Would this solution make sense if the light on the charger turns off instead of staying green once connected?

[@lt.ripley1590]

Need help my mobility scooter from Green power has not worked properly since I got it. I have got new batteries and they replaced the charger port under the seat. Now unless my horn beeps and the front light works it will NOT charge. I have to piddle around trying to get it to work. Once the horn works and the light comes on then the charger will go red and I can charge it. But the light and horn only work sporadically. ANY IDEAS.

[@TheMaverickq]

Just check your settings if its on proper voltage or higher.

[@martinsmith993]

Got a similar problem with a brand new bogist Pro 5 any advice would be appreciated

[@ahenkorakwabena7024]

Hello, my new Cruiser Pro electric scooter bought for £589 was delivered to me, but LCD cannot turn on, eventhough battery is fully charged. The horn and lights doesn't turn on as well. What may be the issue with the scooter? Thanks 😊

[@bigzybinc]

Hi. I really need some help. My controller keeps going back to 36v the scooter should be 52v Solar sent a new replacement but it’s still doing the same thing going back to 36v

[@ibrahimameer4410]

I bought an AOVOPRO ES80 a few days ago and it arrived in the post yesterday, it’s not turning on even though I’ve plugged it in, I press the power button but nothing turns on however the rear brake light just flashes once very lightly. Do you have any ideas on what I could do to try and get it to run? Thanks

[@scewtersource]

recently i got an error code on my levy scooter when i wrote to levy with questions they could't give me a straight answer what do you think it iz ? the moter does''nt function any more

[@gear0neb131]

I’m having the same issue but the fuse still has continuity, I’m not sure what the issue can be. Any suggestions?

[@iconicprogramer9048]

Does it work on any electric scooter

[@alanbrady420]

Hi there thanks for the video my son has a chaos 1000 scooter that is doing the same as yours as in the charger lights staying on and it also won’t turn on unless the charger is plugged in, do you think this is the same problem as yours?

[@brianrosie1762]

what size and voltage is that (what exactly am i looking for)? if the same thing happens to me, I'm going for 10 amp or higher so it has no chance of failing. I don't have a crafting bench and supplies, so diy fixes are out of the question

[@عليآلحماديالعروس]

Hello sir ...why my e scooter 10 inch tire 48v 4000w its began charging slowly and late 3 hour .it was take just 2 hour .i save the charge by save enrgey in it and not let it be empty.

[@gadfay8463]

Thanks for the video. What happen if you plug higher power chager in the less battery, for ex: 72V charger in 36V battery? The charging process starts or not ? Thank you

[@jamescashmore1452]

BMS WILL SORT THAT

[@gadfay8463]

@@jamescashmore1452 It's sure? Did you any BMS to recommend ? Think you?

[@jamescashmore1452]

@@gadfay8463 no i do not fix batterysbut in th efuture will learn then get back too you because i can not let this be a problem

[@JacobOlli]

Just got a new one, it was fully charged. Then i changed the volts, from 36 to 60 on a 400w battery. Not even sure that was supposed to be possible. But now it's on the first bar, and doesn't charge any further. Can you help?

[@mad-pit3832]

Hello mate, i have a mantis 10 with the eye3 display. The charging light goes red and then green like i have a full charge. But when i turn it on the display flashes as it goes from max voltage to near 0 and then all turns off. It takes 2 seconds to happen and then i cant turn it on again for another 10 minutes as nothing happens when pushing power button, and it does the same thing. From 67.5 volts near nothing eveerytime, any ideas on what the issue could be would be greatly appreciated mate.??

[@mandeolsen1296]

I just changed my fuse and every time I turn it on it just beeps all the way be and doesn’t stop. What do I do to get it running form backwards I can’t reverse I can’t go forward.

[@sprintrealmhuntersUK]

Hi there I'm in UK I have got the same problem with my scooter with charging shows up green all the time child turning on hitway H5 power button nothing comes on I just seen what you does with the 5 amp fuse will it work on my scooter

[@Sportiestsports]

What happens if you have a red light and then it turns off when you put it in the charging port but doesn’t charge

[@TorontoPopulistConservative]

The fuse is a feature, not a bug. Most scooters don't have a charging fuse (at least not one that is in any way accessible). I've seen plenty of batteries that happily turn on the scooter and run the motor but don't take a charge. There is no recourse except replacing the battery or having a battery repair specialist take a look.

[@emiliyangeorgiev22]

Hi, if I plug lower voltage charger ,12v or 38v when it has to be 47v-48v is the scooter going to show any signs of charging?

[@alexespinal7206]

i have an issue with the charging on my wolf warrior every time I let it die as im riding it tough to get it to take a charge on both the chargers i have they have the green light when i plug em to the wall but as soon as i plug the other side to the charging port it makes a SPAT NOISE AND THE GREEN LIGHT GOES OUT afterwards i have to wait likght 10 minutes to be able to try it again PLEASE GIVE ME ANY ADVISE IF YOU CAN I WOULD APPRECIATE IT THANKS

[@CoyTheobalt]

4 min intro!?

[@StephanieJones-r7l]

My battery does not have a fuse I have the same exact issue you where having can you please give me any suggestions on how to fix

[@Tsmith123]

I have a crony scooter, when I plug in the battery, it is fully charged and operates, but once i disconnect the charger. it dies, zero power. what does this mean? how can i fix it?

[@espantapajaroscr]

I have lost my original charger, I looked at the manual and bought a 24v 0.5a one and it did not work, I did not charge. Some electronic technicians tell me that I use a 27.6v charger, another tells me 28.4v, I'm really confused and I don't know which charger to choose. Could you tell me what voltage I use to charge my scooter? Thank you PS: battery is acid lead 24v

[@sonnyhurley5211]

So would it charge to 2 and turn green cuz my solar p1 doesn’t that

[@kenoborici4857]

So it means if the green light turns to red at the time I plug in to the scooter is charging?

[@fantastictv3374]

Yes

[@AmsLeigh-k3s]

Hi my Ricco 48v electric scooter will not charge and the charger is staying green just wondering if you cloud help thank you

[@Ichigoalone]

Hello Mark! I really need ur help man, i've got lyfco electric scooter 3200w premium, everything is on as normal, but it wont rolling on,please tell me wat can i do 😭😭

[@brianwenger2112]

He's right about "not needing a fuse at all". Just make sure you don't accidentally plug in the wrong cord

[@scottlei]

·hi, may i ask whet does it mean when the charger shows green light but once plugged into my scooter the light went off not showing red. Also scooter not chargeing

[@nafi.j]

Hi.. I have a Kugoo g booster and today while riding suddenly my scooter's battery drained itself from 95% to 0% within seconds, also after a quick charge the battery and the voltage was full but after pressing the throttle it drains again.. !! any idea when went wrong suddenly ? or what shall i do to fix it. I would really appreciate it if you can give me any solution. Thanks.

[@ovenheating9482]

I had a electric scooter with a 36v battery start doing this the other day. It randomly shut off during a ride and wouldn't come back on or charge. I tried the charger on another scooter and it worked fine so I assumed it was the battery. Took the battery out measured the voltage and it read around 13v. Dead. I install a new battery and the scooter still wouldn't turn on or charge. I pull the battery back out check the voltage and surprise it's at 8.8v. Also dead. What killed these batteries like that? When I installed the new battery it was fully charged and now it's just dead. I took the scooter apart to see if I could find a short or cause but I couldn't find anything. No sparking when I connected the battery no burnt wires or burning smell. No visual signs of overheating on the controller and no blown fuses. Didnt even make any noises like popping or buzzing that usually indicates something is wrong. Is there something I'm possibly missing and is there a way to save these batteries? It's kind of frustrating considering not only is the scooter still down but a fresh battery pack is also no longer working so it's just money wasted at this point without knowing a reason why. Is it possible a short is somewhere that isnt going to show it's self but will still fry the battery like that? I didn't even have the new battery installed for more than a few minutes and it went from around 42v to 8v. That much of a discharge with no visual signs or sounds just doesn't seem right. That's a lot of power to just disappear.

[@TorontoPopulistConservative]

Your controller is shorted and both batteries are probably fine. There's a very high chance you'll find that your motor wheel is stiff to turn. Do you have a multimeter? Unplug the three motor phase wires and check for continuity between any two of the three coming from the controller. Most likely a mosfet has shorted and needs to be replaced, causing the controller's power input to become shorted. The BMS sees this and shuts down. With your multimeter, you can compare the resistance of the two probes touching each other to the resistance at the positive and negative input terminals of the controller. If the reading is very similar (close to 0.000), then that is another confirmation. Plug the charger into the batteries without hooking the battery power output up to anything and they should immediately recover.

[@sirgordan2873]

is there a fuse in the controller

[@SwabySean1]

Do you fix evercross h5 scooters

[@MyRcGoSlow]

I opened mines and it doesn’t have a fuse ? MacWheel pro is the scooter I got

[@trinidon9016]

Where Can I find the fuse on the rs inmotion?

[@markjordan]

Hi take off the deck plate and you will see at the top of the battery there’s a load of wires and a control box it will be there

[@wesleybushell3215]

Anyone know how long u charge these scooters got one similar bu no manual

[@bridgeboy4582]

I fully charged up my hiboy titan pro last week sometime. Or so I thought. 4 bars went down to 3 rather quick I noticed last Friday my last ride. I plugged it in that night & I didn't notice the fan didn't start running after the metals connected as it normally does. I finally found out tonight my scooter doesn't charge anymore. What to do?

[@elanpaim33]

hi what model is it any link thank you

[@MyJohney]

hi, do you think one of the thumb control would work on the kugoo g2 pro

[@battletoad01]

Look up the rion thumb throttle dualtron mod the throttle is soldered to the capacitors behind the hall sensor but if ur not experiences with soldering smd components and they are not easy leave it alone or buy backup . If your gonna do it anyway use some precession tweezers to hold the capacitors on the pads as you solder

[@vintaleann]

which fuse is it?

[@jason-white]

But something must have blown the fuse to begin with?

[@gracemiller3861]

mine is turning red when i plug it in not green what does that mean

[@MetaQuePig]

that means its charging dumb fuck

[@ddddrrrrdrd]

Thank you. you made my day sir

[@kerryblase5936]

Do you think that could be the problem with my varla eagle one I had a big fall when I got up it still was riding fine untill it was time to charge it wouodnt charge I tried the over night thing and it still wasn’t charging.

[@markjordan]

Sounds like it could be .. take the deck off and check the fuse as the scooter will run until the battery is dead it’s only when you try charging you will struggle 👍

[@kerryblase5936]

@@markjordan thanks I’m gonna try it with my pops ion wan handle that myself I’ll let yk how it went

[@janetparilla2561]

Where do I get the fuse

[@dgkincy]

Can anyone tell me where the fuse is located on my Volpam SP06 Electric Scooter? Charger works but Scooter not taking a charge?

[@datbouldrawlinun8183]

As a electrician it’s going to catch on fire. Good luck

[@erniecorrell6798]

Hey my girlfriend has a smaller one that is doing the same thing.does the smaller scooter have a fuse as well

[@markjordan]

Which brand is it?

[@pianoman2781]

Thank you sooo much. I have a Thor electric scooter from mototec, and mine is doing that.

[@ArunSharma-f2z]

I charge my bike but this bike only five minutes charge and green light is on please give me solutions

[@Aqeel.M]

Great job. Love it

[@petercampobasso1802]

Why wouldn’t you just replace the fuse? The fuse did its job, protect the battery.

[@juslukin2437]

Hello Mark :) and thanks for a awesome video ! I have a Kaboo Mantis Pro 10 with the exact same problem that you had ! however i'm gonna replace the fuse just in case :) Keep up the good work because us committed scooter riders need Excellent video's like this ! I most certainly will be subscribing 👍

[@Kriswixx]

Did it fix it?

[@carlreid4812]

@@Kriswixx not yet 🤔 I replaced the fuse but still no luck! I'm thinking it could be the connection between the charger port on scooter 🤔

[@Kriswixx]

@@carlreid4812 tight. It could be rusted pin ports. I need to get a micrometer and put one point to each and see if the pins are + - and which one is the dummy .check volts coming out of charger and on batt. I'm not sure if it's a key problem or charger badm just gotta get the tools to check. All because the tires were flat. Like I didn't need this usually it chsrges right up. Sat for. Ehilem hope you get yours fixed. Imma check for a fuse in there. Good luck.

[@quentindickens3125]

I have the same problem now with my Wolf warrior gt don't know what to do but I'ma try this

[@GeeQPhotography]

@@quentindickens3125Did it help?

[@RebeccaVasilas]

I have a Apollo City pro and sparks came from the charging port.. Does the scooter have a fuse cause scooter will not turn on anymore

[@markjordan]

Yes it will have a fuse check the light on the charger first to make sure the charger is working,then try to locate the main fuse by removing the top deck very easy👍

[@RebeccaVasilas]

@@markjordan so under the scooter remove the bottom to get to the fuse

[@markjordan]

No on the top under the grip tape should be the screws to take the top off the scooter then you can see the battery and wires from the top

[@RebeccaVasilas]

I have taken the battery right out and yeah no fuses at all anything else you can think I should try like I said it’s got plenty of charge in battery but since I made it spark it will not turn on at all....

[@valtercadima7385]

Same problem here...did you resolve it? ​@@RebeccaVasilas

[@stevethompson3664]

thank you i have an electric scooter and somebody told me to get a battery tender and says it should be charged constantly when not using . Is that true?

[@markjordan]

I don’t recommend keeping your battery charging it’s best to use it and when it’s low then recharge

[@mad-pit3832]

@@markjordan Hello mate, i have a mantis 10 with the eye3 display. The charging light goes red and then green like i have a full charge. But when i turn it on the display flashes as it goes from max voltage to near 0 and then all turns off. It takes 2 seconds to happen and then i cant turn it on again for another 10 minutes as nothing happens when pushing power button, and it does the same thing. From 67.5 volts near nothing eveerytime, any ideas on what the issue could be would be greatly appreciated mate.??

[@Jim-qe8rx]

Have 58v roadrunner scooter went to plug in charger and plug port exploded on me now won't charge and battery rapidly drained unplugged batteries and plugged back in and connected charger to other port and green light still

[@GJX-xy7dm]

Got new e-scooter. Zipper mobility 2 wheel. Came with fuse out. When I try to add fuse it sparks and bangs. Tried 3 times. Doesn’t have an ignition. So how can I disconnect power so I can add the fuse ?

[@ryanpjk-sproule3813]

My man is 10 V2 when I got it fully charged with 67.2 volts Now it only fully charges at 66.5 I've lost a couple miles on speed and range what do I do :-(

[@predator4341]

Hello Mark this is Sam from Chicago I am reaching out to you for advice and Your expertise. Since I leave on the 3rd floor in the apartment building charging the scooter for me it's impossible because I don't have a garage And the weight of the scooter is huge but I can keep the scooter in my car, so The question is Do you think that dual motor scooter with non removable Battery can be customized to remove the battery for charging without taking the whole scooter With me to the 3rd floor. And I Think I have the vision of doing that😃 and I think I understand a little bit but I may be wrong I understand that removing the battery itself it's not enough because there is charging ports and maybe some controller that has to come with it and maybe some Wiring have to be customized That's why I need your expertise😃 Thank you

[@markjordan]

Hi buddy yes you can remove the battery but it’s a bit of a pain as you would need to do the same process as changing the fuse so all the top deck needs removing….

[@niteblaster1]

Good video 😎 My Wolf warrior X-pro charger indicator light is blue 😱 I've read it means that it's too cold to charge the battery, it's 17c outside 🤔

[@NewYorkRealEstate]

Hey, quick question! I had not using the scooter for about 2-3 months and didn't charge it and now when I'm pluging the charger its not charging the scooter, the LCD is not even turn on. do you know what the solution ?

[@markjordan]

Check the fuse ?

[@NewYorkRealEstate]

@@markjordan The battery went below 31V so the charger is not recognise it.

[@NewYorkRealEstate]

@@markjordan yes, fuse are ok, the battery went below 31V so I’m guessing the charger is not recognized it

[@danielemariniello1646]

I got my kaabo mantis 10 lite with the same problem...and the scooter doesn't charge should i change the fuse?

[@markjordan]

Yep change the fuse it’s only a standard 5amp fuse and it’s really easy

[@danielemariniello1646]

@@markjordan find out the problem! Wasn't the fuse but the plug 🤦🏻‍♂️🤦🏻‍♂️many thanks anyway