Repairing and Upgrading ToyBiz Doc Ock - Doctor Octopus Custom Figure

Shop: craftygeckocustoms.etsy.com
Instagram:
crafty_gecko?ig...
Patreon:
/ craftygecko

[@geoscorner3567]

You make these look so easy, maybe it’s the hours of footage you cut out lmao. Great work as always

[@CraftyGecko]

Thank you! I would love to post full length without editing the process but even I got bored watching it back

[@MrSquid-ko4fp]

Great upgrade! As a huge Spider-Man 2 fan, I really do appreciate the attention to detail that many tend to miss in this version's Doc Ock arms. Though, personally, I would have customized one with missing claw parts, which are much easier to come by then ones fully intact, sense you are just replacing them.

[@CraftyGecko]

Thaks! This one actually did have damaged claws, both his bottom ones were missing some

[@s1y22]

This looks so good! You're really bringing these old figures justice!

[@CraftyGecko]

Thank you!

[@s1y22]

​@@CraftyGeckoNo problem!

[@Spider-Drip]

I would love to see this with the new legends figure

[@CraftyGecko]

I'm hoping to get the doc soon to start testing prints

[@paulmccarthy3802]

I'm so excited to possibly get these for my Marvel Legends comic based Doc Ock. Thanks for this fantastic video CG.

[@CraftyGecko]

Thank you! I'm hoping to get hold of a marvel legends doc ock soon

[@talkinganimalxtreme]

These look amazing dude can't wait to get some off your store at some point thanks for another great video hope you have a great Christmas!

[@CraftyGecko]

Thank you! Have a great Christmas too!

[@javodey]

I can't wait to get my hands on those claws. Not only do I have the OG Toybiz bendy tentacle doc ock, but the hasbro one fron NWH too. Both would look awesome with these upgraded claws. Especially where these ones have all three joints like the movies AND can fully close. Might buy two sets, actually! I have a custom in mind for a character that has doc ock-esc arms

[@CraftyGecko]

As soon as I have a doc ock to work from, I'll be adding these to the store

[@javodey]

I got mine at Gamestop, should be hitting stores now

[@javodey]

Also, is there any possibility the printed tentacles you made will be released? They are far superior (no pun intended) to both sets of tentacles made

[@CraftyGecko]

I'm in the uk so it takes longer to release here. Unfortunately I probably won't release the tentacles because they take so long to make

[@pinkpeter0007]

Nicely done.

[@CraftyGecko]

Thanks!

[@hellishdfynce]

Great job!

[@CraftyGecko]

Thanks!

[@Sethyboy_]

I like that with the bottom set of claws, you went with the Spiderman 2 design with the fork design at the end, which the no way home one doesn't have

[@CraftyGecko]

Yeah I'm keeping my toybiz mods accurate to their time

[@devincorporated]

Awesome

[@CraftyGecko]

Thanks!

[@MrWaffles972]

I subscribed as soon as you said you were going to add these for the marvel legends lineup I just broke one of my tentacles and honestly yours look 100 times better than the one that hasbro put out

[@CraftyGecko]

Thank you! I don't think I'm going to be selling the whole tentacles though im afraid, it would just be the claws. The tentacles take me too long to make so I would have to charge £100+ for them

[@MrWaffles972]

Meant to say the actual claws broke but I’m honestly excited for whatever you got in store for us. I’ll definitely support what you put out !

[@CraftyGecko]

Thank you!

[@gabrielsato3764]

This tentacles look miles better than the new Hasbro ones

[@CraftyGecko]

Thanks!

[@mythical_ds8222]

I need tentacles like these for my custom, I extended the tentacles on mine.

[@CraftyGecko]

Oh nice how did you do that?

[@mythical_ds8222]

@@CraftyGecko i just used fodder toy biz tentacles and painted them, but they are not as strong as the ones you made here

[@CraftyGecko]

Oh right, that was a good idea

[@bladewilson1052]

Million dollar ideas

[@CraftyGecko]

I do try! 😅

[@Anthony-gc1qt]

I love these raimi figure videos! Have you designed a 3d print file on thingiverse of the trident that the battle ravaged goblin figure came with? I have everything but the trident and that would be amazing to be able to print! Keep up the great work!

[@CraftyGecko]

Thank you! I didn't actually know that figure existed

[@Wtbek]

i found this beauty for 12 dollar but i missed

[@CraftyGecko]

Thats such a shame

[@Whoopsie00]

Oh yeah, isn't Kiki's just like wood floor varnish or pledge floor coat or something?? And you can get a way cheaper version of the same product. Something like that idk. As per usual, incredible design! Great work!

[@CraftyGecko]

Thank you! It might be, it's just the stuff I use because the nozzle makes it easy to apply, and it's known to work.

[@Beas_the1st]

One guy did it better than hasbro

[@CraftyGecko]

Haha thank you!

[@ironmanironman6727]

Grupo Los Enanitos Verdes Rock

[@CraftyGecko]

no entiendo, lo siento

[@mrhumanspider]

I saw that many people sell this one becasue of the new version. Omg I wished I can do the same thing you did in this video. But the first thing I need to do is to buy one figure like yours old. I have one but the one that comes with removable tentacles if you now what I'm talking about? As for the tentacles part you only take them off and then insert in any of them wire? But do you think that will work out for my if I use instead of 3D klaws the original ones?

[@CraftyGecko]

Yeah a lot of people did sell it, and I can understand why but it is a shame. Yeah you could add wire into the original ones, they have a hole that runs the entire way through

[@mattthestormtrooper3239]

Are you planning to make custom figures for the villains on Raimi Spider-Man games? (Examples are Scorpion, Lizard, Black Cat etc.)

[@CraftyGecko]

It's unlikely but there's always a chance

[@chainsawash4566]

What color paint did you use for the yellow part the marvel legends has no yellow and I plan on adding it?

[@CraftyGecko]

I cant remember I'm afraid but I'm fairly sure I show the colours in the video

[@georgepetrou3593]

What programm did you use to create the tentacles?

[@CraftyGecko]

Tinkercad

[@Marcos_79]

Hey man how much would you sell the old tentacles for

[@CraftyGecko]

I'm not too sure, they're not in great condition. The top ones were good but the bottom ones were really broken

[@topregele6582]

What are the raimi villians you still have? Do you have venom from Spider-man 3?

[@CraftyGecko]

I dont have anymore just yet, but I'm working on customs for them

[@topregele6582]

@@CraftyGecko wow I can't wait bro🤩

[@Bekocan_yoldas]

Bunun dosyasını nerden bulabilirim

[@CraftyGecko]

Şu anda dosyayı satmıyorum kusura bakmayın

[@AdrianAlejoiscool]

Can I pay you to customize my spider punk marvel legends and add toe articulation to it

[@CraftyGecko]

I'm not doing commissions at the moment but I would be happy to look into it?

[@AdrianAlejoiscool]

@@CraftyGecko so if I did send it to you can you stiffen up the joints for the legs and add toe articulation to the figure

[@CraftyGecko]

Yeah I could do that

[@adamburgess311]

Hello crafty gecko

[@CraftyGecko]

Hello

[@adamburgess311]

@@CraftyGecko love the arms

[@CraftyGecko]

Thanks!

[@mtaredline1758]

Can you share the design?

[@CraftyGecko]

I will try at some point

[@skitterycash04]

Will you sell the file? I’d love to print it out and modify my doc ock as well!

[@CraftyGecko]

I'm afraid not, I don't sell my files anymore, mainly because I sell the printed parts. I could however put the files for the vertebrae on thingiverse with the glasses

[@skitterycash04]

@@CraftyGecko awesome! can’t wait to print them. you did an excellent job modelling those pieces!

[@CraftyGecko]

Thank you!

[@skitterycash04]

hey man! did you put the file on thingiverse? or will you sell the pre-printed arms on your etsy shop? i’d love to have a set of your wonderful design!

[@skitterycash04]

Nvm, I already modeled my own but thank you for the inspiration!

[@Bekocan_yoldas]

Link varmı dosyanın

[@CraftyGecko]

I don't sell my files ad haven't posted any free parts yet

[@user-gk8lf3hp6e]

PLEASE, UPGRADE THE AMAZING FANTASY ARTICULATIONS!!!!!!

[@CraftyGecko]

I dont think there's much I could upgrade other than the butterfly joints and toe articulation, it's one of the best figures articulation wise

[@godzillamaster077]

​@CraftyGecko maybe you can try to add tilt to his head

[@CraftyGecko]

Looking at the figure, I think it would be difficult to do without risking damage

[@MrGhost96]

anyone got the file for this?

[@CraftyGecko]

I dont sell my files

[@MrGhost96]

@@CraftyGecko Dang they look good

[@CraftyGecko]

I will be listing the vertebrae files on cgtrader at somepoint, and I'll be selling the articulated claws for the new marvel legends figure at some point too

[@MrGhost96]

@@CraftyGecko I need to find that doc ock I have the original

[@CraftyGecko]

Oh nice