Old Router Restoration Makita 3600H

[@samuelfellows6923]

I have a concern with that replacement rotor you’ve put into it - it has a centrifugal fan impeller on it which is the wrong configuration for the vent in the bottom of that router, the original “Makita” rotor (that you found had a short in its commutator) has the “correct” axle fan on it for the position of the vent. - repair the “original” rotor/try to swap the impellers over for the correct air-flow to cool the motor ✅. In its current form, a risk of it overheating ⚠️

[@GroundhogClay]

I have two kids that are 2 and 4. After they have ran me ragged.... These videos are my peace. Thank you and keep up the good work

[@АндрейНикитенко-ф4с]

No, with black plastic, this is not Makita. ;) There are nagging, but overall a good job.

[@Cradley684]

Excellent friend, have a nice day !!!.

[@garymucher4082]

Now you can do a video on repairing the defective old armature. They do sell commutators for that armature. Just a thought!.

[@samuelfellows6923]

And that the replacement rotor had the wrong type of fan on it for the position of the vent in the power tool - risk of it overheating ⚠️, if he can repair the original “Makita” rotor with the axle fan = he could put it back into that router and have the correct air flow to cool the motor ✅

[@paulorth2251]

Interesting piece of work, like the upgrade, seems to really made a difference. 👍😁🇨🇱🇺🇸

[@RESTORATIONOFSCRAPMETAL]

Excellent but little known router, cool project and excellent restoration buddy 👍

[@lars-akeisaksson]

Fel färg på handtaget annars helt ok

[@Austeration]

Very nice job 👍 there will be no stopping you now. You will be finding all sorts of jobs to use it for.

[@Darkassassin09]

The fan on that new rotor won't be functional in that case... This things asking to overheat.

[@matthewhopkins666]

That was what I was thinking the fan on the new one appears to be designed for side vents and the case is a top vent.

[@samuelfellows6923]

⚠️ - yes, he needs to repair the the original “Maketa” rotor that has the axle fan on it, or what I would have done = try to swap the impellers over so it has the correct air-flow to cool the motor ✅

[@ahacpatb8736]

Подшипники надо менять.

[@Brainless_y2k]

what is that white powder you put in warm water? some kind of detergent?

[@yeagerxp]

Nicely done 👍👍👍Thanks for sharing

[@ryanpage6635]

This saved me pulling mine apart, thanks.

[@oscargomezmadrid289]

El cambio del rotor afectará a largo plazo el funcionamiento?

[@suzyhendrix]

What are you brushing on at 9:57?

[@churlepatakha]

Good one, nice and decent color selection.

[@MsJangot]

Good job. But I didn't like you that changed the colour. Because makita should have a specific blue color.

[@boyna1987]

I thought you would rewind the armature. That's a great challenge to you for a future project. Nevertheless, nice job! Congrets!

[@jurgs18]

You need some Japanese Industrial Screwdrivers (JIS).

[@robertovillalobos4798]

Mejor que nuevo , excelente , saludos desde Venezuela ciudad de Maracaibo.

[@cardinalrestorations]

That's some good work. Nicely done !

[@myrestorations]

Great result 👏 👍

[@JamesDeese]

Really good work. Well done.

[@HueMongus101]

Do you know if the body was cast from a magnesium alloy or something else?

[@restaurandocoisasvelhas]

Dude, spectacular video. It was excellent my friend. I'm already your subscriber. Like for everything.

[@germanmatias5521]

Hola, muy bueno, que es lo que usas en el minuto 10:00. Pintura, barniz...??

[@jimwhite5964]

Nicely done... thanks!

[@synott]

Good work

[@lukeolinger6000]

You should have cut out the shape of the thumbs up button. The wood piece you had was perfect for it.

[@FerSniper]

Лучший!!! Спасибо за потраченное время!!!

[@RestorationAustralia]

Nicely done.

[@-Deena.]

Looks great! 🧡

[@lolcec81]

Комментарий в поддержку канала и ролика, а также труда мастера.

[@IanSmithKSP]

That cut you made at the end, freehand - very very dangerous. You don’t want to make cuts like that without straight edge guide. Routers climb, and when they start climbing they climb fast

[@lihan4537]

I have exact same model. Bought almost new condition from local Sunday market for $10.

[@THCvlogs]

I think replacing the cooling fan shouldn't be useless

[@harrygregory6227]

what year is that router from?

[@janjan42gt]

dont solder the wires because under load the solder can melt again and so i could cause wire burning or something else next time crimp thw wires only

[@romeovidalrodriguez7754]

hola el video está muy bueno: 🤜🤛👍👏👊

[@kuzzmenka]

Oh, that's old router? So what WiFi name it has?

[@Mindtramn]

black handle on the Makita? not canon !!!

[@jonfeuerborn5859]

Nice work on the guts. Questionable design choices. 🤔

[@KazakovNik]

The slats at anchor are already falling off: the anchor is to be replaced. Ламели на якоре уже отваливаются, якорь под замену.

[@petricabistricean1806]

super tare

[@ЭрнестЛебедев-и2ж]

Цвет много значит в этом инструменте

[@ФедорКиселев-ш7з]

На ручку посмотрел думаю что за електрокружка)) а нет фрезер

[@ezequielsilva2709]

Muito bom 👏👏

[@flaman2011]

Painting it blk isn't restoring it. It's altering it

[@richardraynor7197]

a bit too much use of the hammer and impact screwdriver

[@DatBlueHusky]

wish you didnt paint away the makita colors, now looks like shit

[@robertobezerra8376]

Show 👏👏🇧🇷

[@budwoodman1716]

Why on earth would you make your test cuts on PARTICLE BOARD ??????? Next time try it on a real wooden board !!

[@ВалерийБаранюк-я7э]

Да. В чёрном цвете, это уже не makita

[@arnepauly2285]

Next time just tape over the parts you don't want painted (eg. th outside that fits in the handle.

[@jabuticaba2000]

should have changed / kept the old vent..

[@amirpourghoureiyan1637]

That's a weird looking Network device!

[@rust_hunter7867]

Yeah probably because its from the 60's. Networking technology was wild at the time

[@samuelgalera4672]

Horrible quedó pq tienen la costumbre de pintar las máquinas cuando son de aluminio xd lo arruinan no se pinta lo aluminio tiene que quedar pulido y laqueada y los plásticos de color Makita también tiene que quedar del mismo color xd de última quedé laqueada lo único que se puede pintar es la marca sea Makita del mismo color que ellos se identifican xd por eso cada marca tiene su color xd una hermosa maquina arruinada y pésima restauración xd

[@joaquinvidela1207]

Sound like a vaccum cleaners

[@zerocks88]

you cant black a makita wtf

[@franciscosalamanca8174]

🇪🇨👍

[@ЕвгенийСтонис]

👍

[@farouq1983]

3:20 Unbelievable! You should have not cut all that material from the commutator!