Cordless Screw Driver BOSCH IXO Restoration and USB TYPE-C Convert

In this video, I restored the driver and covered a carbon fiber handle.

[@TheducksOrg]

I made almost half a million dollars with one of these - travelling all through north america installing server equipment :)

[@robertobezerra8376]

👏👏👏👏👏👏👏💯💯💯💯💯👍👌🇧🇷🇧🇷

[@Jackson-dx6du]

Бош, а якість як у ноу нейм. У мене старенький еінхель на сталевих шестернях з поворотною ручкою з регулятором зусилля з фіксатором біти, з підсвіткою і вихідний вал на підшипнику😅

[@marleensrain]

that Carbon Fiber gave it an extra 40 ft pounds of torque

[@barskuleli8612]

Minimum…

[@kingcola7555]

horrible attempt at replacing the rubber grips unfortunately

[@itsLeels]

How about you provide them for him then? Only fair.

[@SanderRekveld]

The classic WD40 multi-use product should never be used as contact cleaner replacement. I use a glass fiber brush to first clean the contacts and then apply PRF contact cleaner to clean and lubricate.

[@boofuls]

Actually wd40 do make a contact cleaner 😊

[@BrainHurricanes]

Best not to use abrasives for cleaning contacts. Regular paper or paper card soaked in contact cleaner is safe. Contacts can have a very thin coating that sands off immediatly. Learnt from xraytonyb.

[@therealchayd]

This is brilliant! I've lost the charger for mine, and if I remember it was quite a big heavy thing, so this USB-C mod is perfect. Will have to give it a try. Thanks! (Edit: Also love the carbon fiber trim!)

[@yannkitson116]

You can use a phone charger instead. I found my ixo on the street so it didn't come with a charger :) My ixo is from 2015 and for the 4 years I have had it I have used it every day at work.

[@Tom-zq7lu]

Fantastic and beautiful thank ✌️ 🆗️ 👍 🤗

A restauração ficou legal mas esse tipo de parafusadeira não serve para esse tipo de serviço (14:03), o motor superaquece e a bateria não aguenta a corrente que o motor exige para esse tipo de esforço, é por isso que se vê muitas dessas ferramentas estragadas e virarem lixo por mal uso de que não sabe operar.

[@RajputMusicYT]

0:20 bosch helping bosch 😂😊

[@popcornshiner3937]

That was great, I have the same model that looks almost new but the battery is gone, great to see what I need to do, BTW the upgrades are very cool

[@UnCoolDad]

WD40 is the wrong stuff to clean contacts. Use proper contact cleaner.

[@patrickcardon1643]

It's a nice little screwdriver, bought it new when it came out. The base is triangular, containing the PSU and 2 contacts to charge the cell. I know now what's inside, for when I need to replace the cell. Mine's nowhere as used as this one, so hope to get many more years out of it

[@lensopurnomo8981]

BADUT ANCOL ADA 2 Orang sekarang ... pelawak dan stand up kenapa mau merebut kekuasaan cari cari curang kurang canggih , dana kurang

[@efektmurowany]

Use some proper contact cleaner, not wd40 if you love your tools 😊😊😊

[@Tight4Skin]

I loved when these came out and you could only use it for 5 minutes and had to charge it for 30. 😂

[@cristhian1989]

LOL

[@Ffff83108]

Ну с карбоном реально какая то херня получилась

[@pekkahilden6802]

These ”restoration” videos get more and more ridiculous …

[@Jaro613]

How to make that we can use bosch ixo while charging?

[@MaxVel-v3w]

oh no, just don't sand the switch contacts, use a hard eraser

[@Cabeza492]

Very nice job with the charging port. It looks a bit crappy with the carbon fiber and the glossy finish... but considering that is just a tool... I guess that it works fine anyway.

[@SergeyDemi4ev]

8:50 просто сделал мой день . давно так не смеялся 🤣🤣🤣🤣

[@bestchrisspopas4295]

it's a shame, it's poorly made the bosh, I used a 10E, Budget screwdriver 3.6V 1x1.3Ah, which has double gears ,it has more power and rotates from 90 to 180 degrees

[@Toit72]

Did you change to lithium batteries, where did you get the charger from, or did you build it yourself too?

[@brahimbessghir9470]

شكرا على المعلومات المفيدة جدا

[@rutikuiwa7133]

Nice work

[@my.epicearth]

Wishing you a very lucky and good new year

[@glenbraithwaite7158]

Excellent job sir!! Thank you so much for sharing 😊 More tradespeople should re use & recycle You've proved it can be done ....with pride ❤

[@Abboud-1-]

Good job 👍🏻💛

[@djamellouhibi3039]

عمل متقن و رائع....واصل

[@erhardnix9586]

It ist absolute useless to restorate this old IXO, because a new one is so unexpensive. Thats the reason why i love your work, very well made. I own the same IXO an use ist nearly every day. But now i bought the last version, cause IXO 7 has 5,5Nm

[@MASI_forging]

It looks real good after renovation 😊😊

[@FRINGE-rk2fe]

Лютый ужас

[@boofuls]

I will fix you brother 😅 (bosch driver helps a bosch driver)

[@jailsondasilva223]

Restaurada aparafusadora sem fio 😉

[@ОлегШапоренко-щ1б]

Не совсем понял с зарядкой, на выходе модуля 7в. Не многовато будет. Или там какая то своеобразная родная зарядка

[@jimfischer3527]

I have used mine for years, but the battery is failing. What is the replacement? The LI-18650 I saw was too long.

[@cfusername]

They usual use a 18650. Yours may have a protection circuit and is therefore a bit longer. A bare 18650 cell should fit.

[@mpalaskokkalis1476]

Perfect 👌

[@mannyfiler]

Skil made an exact replica of these, I still have it and use it. Thank you for sharing your work.

[@josefpichler7271]

Bosch was at this time owner of the Skil company!

[@Cabeza492]

I have the Skil replica too :)

[@Hangover_Soup]

IXO 3

[@oldcat1790]

Wow, that's a lot of plastic gears. I expected better from bosch.

[@Cabeza492]

You expected some kind of metal alloy? Well it's just for little jobs, not for heavy duties. Plastic gears actually works perfect on it.

[@cfusername]

A few years ago, I bought a couple of basically identical drivers from the German Aldi market. When taking them apart, to put in larger battery, I was surprised to see, that the cheap one from Aldi actually used a complete set of metal gears, while the Ixo used at least partially plastic gears.

[@vladislavdimitrov4646]

What was that makita battery?

[@jaimecorrea24]

1 mer video del año Happy new year 🎉

[@SINA-ck6wy]

nomber transistor?

[@musoomatelj1575]

INGCO BEST

[@markshellard5894]

Got no power too week now 😂

[@leander5067]

Класс!!!!😊

[@mp1454]

🎖️♥️👍🏻

[@x84pav84x]

Молодец!

[@afrikano8348]

Does this missile operate on 220 volts? With these specifications Angle grinder, compact angle grinder, extra-low voltage tool FINE MSf 742 0.6 KW 8500 rpm 42 V 1AC 50 Hz Grinding wheel diameter: Ø 125 mm Inner diameter: Ø 22.2 mm Spindle thread: M14 x 2.0

[@Akc64]

5:00 bad news... Ur solder is bad(

[@nastyevilbunny]

This is fast be coming my favorite restoration chanel. Nice work mate.