Restoration Angle Grinder BOSCH GWS 7-100

[@RestorationVideo]

*_The restored version looks absolutely splendid! I appreciate your hard work on restoring these items!_*

[@homemade6015]

There are quite a few channels that does these type of restoration but few shows dedication and professionalism like this channel. I would definitely have many spare parts left over putting one of this tool back together. ❤❤❤😂

[@andymora5595]

Great job! I love it when people repair things. But the main problem is, the spare parts are more expensive than a complete new device. In most cases it makes no sense to buy new spare parts. But it makes a lot of fun and saves a lot of ressources.

[@bfpierce]

Had an external part on a poorly designed DeLonghi heater break. They would prefer me to destroy the heater and get a new one sent to me. I creatively followed their rules and now I have 2 heaters. (On a side note, my 80 yr old father still had a robust space heater the family had when he was 5).

[@polarstar]

I know it's fun to assume you know more than the creator of the project, but he clearly states in the description that the tool was $5 and the parts were $15. A new grinder in the US with those specs would retail for at least $160. Reading is fundamental

[@andymora5595]

@@polarstar Sorry, why do you personally attack me? My comment was generelly about all repairs, not only this one. Sure there are things which can cheaply be repaired. But in general, repairs are very expensive and often not economically. People like you destroy KZbin!

[@victoriavalladarez9094]

I had a lot of old pipes and rebar to cut up and from what I read kzbin.infoUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.

[@garymucher4082]

Very nice. Good as new. Actually better than new because you can now use it without worrying about getting it scratched or marked up. Because that will absolutely happen to them all when used... Thumbs Up!

[@notapplicable430]

Very informative. Nice to see how tools are designed and put together. Thanks!

[@tomswindler64]

As much work as you put into that grinder,you outdid yourself.lotta pieces parts repaired and replaced.great job,great video.kudos.😎😎😎👍👍👍

[@אלעדמור-ט4ה]

Wow that video is amazing. You did it on a perfect process.. thank you for showing .

[@conexaojr]

Sensational! Congratulations on the excellent work! 👏🏾 👏🏾 👏🏾 👏🏾

[@tombarlow6176]

That was a brilliant restoration of that old grider🎉🎉🎉

[@FerSniper]

Лучший спасибо за потраченное время!!!

[@DaftOldMan]

Excellent restoration. Thank you for showing us.

[@rigilkentaurus3313]

It'd be nice to know what things you are using (paint, grit, etc.)

[@sophalpich3236]

Good job. Keep moving ❤🥰

[@maatiraouki9124]

C’est excellent pour l’exercice 👍👏

[@calinsandor9518]

Very clean rebuild. I'm amazed how clear you can see thru the sandblasting cabinet. I have a similar one with big 3 phase air compressor but I can't see anything thru the dust. I'm using furnace slag 0.5 mm granulation, much cleaner than quartz sand. What do you thing I'm doing wrong ? Thanks.

[@moeszyslack4676]

It's most likely your vacuum system. Your canister needs to be emptied, or filter replaced, or there are leaks in the cabinet, or a combination of the three.

[@calinsandor9518]

@@moeszyslack4676 Thanks for your support. I don't have or use a vacuum extractor with the cabinet. I see it has 2 large portholes, one in the back, and one in the side for attaching some big hose. I must try with a vacuum house cleaner to see if it makes any difference.

[@عمرانالبني-خ5خ]

Well done I am grateful for watching this video and I appreciate your job. Please write the name of liquid you use I watch your videos not for fun but to learn Thank you very much With all my respect

[@אלעדמור-ט4ה]

What kind of power did you use with the water to wash the platic casing ?..

[@yeagerxp]

Good job 👍👍👍Thank you for sharing. Be safe 🇨🇦

[@leoa7215]

Máy tưởng như bỏ đi mà thành máy mới 👍👍👍

[@victorballester5921]

Great work 👏

[@curiosisinasce4717]

Che brunitore hai usato per i pezzi? What burnisher did you use for the pieces?

What is that spray he uses for plastic case?

[@marwoj100]

Super robota. Proszę powiedz w czym myjesz obudowy, szczotkoczymacze i jakiego smaru do przekladni używasz?

[@mnq7]

Ini baru the real restorasi. Good job bro 👍👍

[@soursan]

Very good work!

[@LRestoration1]

nice restoration!

[@MSJONESBLOUNT]

Excellent job bro 👍

[@louis-mariegenet]

11:42 - insertion of shaft on bearing ... he killed the bearing, he should have taken a tube resting on inner ring instead external ring.

[@robertobezerra8376]

Show de bóla parabéns 👏👏👏👍👍💯🇧🇷🇧🇷

[@Lone-Wolf87]

Well done. 👍👍👍👍

[@รพลเลาะซําซู]

👍👍🙏🙏✌🤙 ช่างซ่อมลูกหมู

[@ЭдуардМихайлов-д1х]

Ваше видео всегда производит сильнее впечатление. Вы восстанавливаете нерабочую технику и получается "конфетка". Всегда с большим интересом смотрю Ваше видео. Спасибо. Вопрос- каким материалом покрываете пластик, чтобы получился первоначальный цвет?

[@TheJoeBarbaro]

Я думаю это просто лак.

[@Electrico-X64]

Silicona en aerosol también conocido como revividor de plásticos

[@Habibulla.M]

Very nicely done..,

[@artemulin]

Those new parts probably costed you more than a brand new grinder . But overall good job

[@abderrahimhaddanitankioupr9367]

THANKIOU

[@Kehuydiet02]

Theo mình phục hồi lại càng nhiều thì đỡ tốn chi phí hơn bạn ạ

[@sergico777]

Лучший!

[@jaimerivasarrieta4312]

Magnifique...!!!

[@edilsoncastro4471]

Ótimo trabalho

[@mpalaskokkalis1476]

Perfect 👌

[@RestorationAustralia]

Very cool.😊

[@nawfelloupi2091]

God job

[@Ezzell_]

You could have taken a flame to the plastics to bring them back to like new condition

[@jeffwylie3821]

What about a heat gun?

[@xtender5]

Is that vinegar at 10:53?

[@pcfnokia273]

Phải có phụ tùng thay thế, còn dùng lại cái cũ cũng không được đâu nhanh hỏng

[@AndersonLuis88]

Amazing 🤩

[@mohamedkhelalfa9979]

Bon travail

[@mehmetonalkarakaya]

👍👍👍👍

[@davidepiccini9254]

Wow comgratulation

[@21thTek]

Excelent, but you installed the cuuting disk backwards.

[@quocthanhtran5199]

It’s perfect

[@donnywong3759]

Like a Charlie Chaplin film

[@TIGER-st6fh]

amazing

[@nelchan2421]

👍

[@ДмитрийБолушев-р6г]

не вижу смысла в этой работе дешевле купить новую, потому что сам занимаюсь ремонтом иструмента.

[@МедведевПавел-р5ю]

"Спец" 80 го уровня

[@kaspersit8274]

Специально угробить инструмент для видео, вы вандал, видно что инструмент был в нормальном состоянии до вас, элементарно по тому месту где вы кабель специально обрезали, про двигатель и редуктор я вообще молчу...

[@vf9009]

Если б это собирал я, половина деталей вдруг стали бы лишними

[@aleksandrjunkin3475]

Supper

[@piotra.n.3299]

Good work but not profitable ... The listed parts cost 80% of the new tool.

[@hichemsaddem186]

And these parts are not available in my country !

[@abodsalha6475]

🥇 first

[@dewakharismasiwi8723]

7-100 now discontinew in my country

[@easjrmain]

Mestre.

[@everton5205]

Comprou o induzido novo o cabeçote novo aí não, assim fica fácil.😂😂😂😂😂😂

[@АзаматБоратович]

абсурдное видео, только якорь и корпус редуктора болгарки стоит 80% от нового инструмента с гарантией

[@remontvgetto]

капец шляпа. пром бу поставил и не тот чт онадо. хотя заказал дорогущие запчасти. которые стоят по сути дороже новой болгарки

[@harkbelial]

That was one abused tool.

[@luismartinezhernandez2733]

Se supone que es una reparación mejor compra una nueva

[@ericziolko6967]

Il en a qui on rien d autre a branlé que refaire des merde pareil ! Le temps le matos et tout ça pour un truc que tu achètes en magasin bricolage 1 er prix pour 15 euros

[@PRO-nm7gp]

столько тупой работы....

[@cesarmarquez802]

Uttto9it

[@C-3PO9988]

저 유선 그라인더 싸구려라 새거 사는게 나을텐데

[@glennmoreland6457]

You'd have been better off just buying a new one...

[@polarstar]

Wrong

[@jameslarson6555]

And you missed the point of the video

[@OrbvsTomarvm]

beautiful.

[@РусланФедоров-н3в]

Реально,лохмотья только для видоса ,а так ей место на мусорке ну или у тебя дохрена свободного времени и старания😊

[@dariusjanulis4119]

Nice👍

[@darkscorp4415]

Gud but not enought as Pakistany repair...

[@diamante5670]

Ni se vale compraste piezas en ves de restaurarlas.....👎

[@bird-hatyai9900]

👍👍👍

[@cesarmarquez802]

Uttto9it

[@C-3PO9988]

저 유선 그라인더 싸구려라 새거 사는게 나을텐데