Replace handle and paddle on IBC Tap.

I've quickly gone this video as we have had a customer with a tap that wont turn off. I spoke with the supplier and they explained that from time to time we may get a fault, just like anything I suppose. So this is just to show how to fix that. Hope this helps.

[@savinasvastara]

Thank you very much for this video, yesterday my bra broke and I had no idea how to change it. Very useful video 👍! ! !

[@carlalarson1431]

So glad I found this video because I have yet to figure out how to get the whole thing off to replace it. Now that I see how easy it is I'm very excited but I cannot seem to find where to order those parts. Could you please share a link so I can purchase these?

[@Scratmun]

Prima, danke. Hat mein Problem gelöst :)

[@AgnesLimone]

In meinem Garten steht ein IBC 1000, vorgefüllt mit ca 500 Liter Regenwasser, diese möchte ich ungern einfach weglaufen lassen um IBC 1000 völlig zu entleeren. Meine Frage ist hierzu. Wenn ich die Abdeckung vorn unten abdrehe, was ist dahinter ? Nichts oder eine Art Verschluss-Segel, weil es ja noch einen roten Drehhahn gibt, welcher sich auch um ein Viertel dreh lässt. Ich habe dies zwar getan, aber trotzdem, in beiden Stellungen kam Wasser auch der Öffnung, wenn auch gefühlt gering. Ist der Tank entsprechend entfüllt, soll er bedeutend höher aufgestellt werden um zum Beispiel einen Eimer, eine Gießkanne, oder was auch immer daruter zu füllen, ohne jedesmal einen Schlauch anzuschließen, wenn man dies gerade nicht benötigt. Danke für Hilfe und Antwort. Zumindest eines der besten Erklärvideo bezüglich Anschlüsse und ihren Aufbau

[@edd3683]

hi, does this means the handle and paddle is universal ? that i can just buy a new screw-able tap and pull out the handle and paddle and install it into the old tap housing ？

[@shion_lwn]

I moved into a house where a previous owner had set up an IBC tote in the backyard. The adapter is the same as yours, and I want to replace the whole thing.. but I'm having a hard time to find a right one online. All what I can find is those threaded black caps with brass tap on them. Would they replace the whole plastic part in the video ?? I'm new to this... I would appreciate your help..!! thank you.

[@Sandblasters]

I found this on ebay, maybe it will help. www.ebay.co.uk/itm/352768963124?var=622075100715&chn=ps&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&itemid=622075100715_352768963124&targetid=1139674278907&device=c&mktype=pla&googleloc=1006691&poi=&campaignid=12126112989&mkgroupid=118099230938&rlsatarget=aud-381667280803:pla-1139674278907&abcId=9300482&merchantid=6995734&gclid=Cj0KCQiAnKeCBhDPARIsAFDTLTLPjYsj8f-Wg85ExDIgAO_ePOB2xtUtZCloqj9WKzJHt5tSy9oLONUaAnK3EALw_wcB

[@carlalarson1431]

Link is no good just takes you to eBay in general

[@angelahottel5013]

😮👍Vielen Lieben Dank

[@bobfalk2896]

can you replace the o-rings? if so, what are the sizes? thanks, bob

[@Sandblasters]

Hi Bob, really sorry I've only just seen this message

[@kermit337]

can i ask question please what size is the cap on end with red insert, ill explain i want join two IBC together and im in uk and tanks in philippines and my end cap is same as the cap in picture with red insert so again whats size of cap and thread please :) many thanks Gary

[@Sandblasters]

I found this on ebay i hope this helps www.ebay.co.uk/itm/352768963124?var=622075100715&chn=ps&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&itemid=622075100715_352768963124&targetid=1139674278907&device=c&mktype=pla&googleloc=1006691&poi=&campaignid=12126112989&mkgroupid=118099230938&rlsatarget=aud-381667280803:pla-1139674278907&abcId=9300482&merchantid=6995734&gclid=Cj0KCQiAnKeCBhDPARIsAFDTLTLPjYsj8f-Wg85ExDIgAO_ePOB2xtUtZCloqj9WKzJHt5tSy9oLONUaAnK3EALw_wcB

[@kevinhill8055]

Iv been trying to find replacement paddle and handle for 2 of my ibc tanks...can't find them anywhere... ?? Could you please tell me where you get us from...?? Many thanks... kev

[@Sandblasters]

Hi Kev, Sorry for the delay in getting back to you. Just seen this. Truthfully I don't know sorry, have you looked on eBay?

[@billbirkbeck4113]

Unfortunately my valve tap has just snapped off !! Is there any way of getting the tube out without the handle

[@Sandblasters]

Hi Bill, no i dont think so. The handle holds it all in

[@myrthocharles2525]

Where can i get it ? Can you put a link where to find it please.

[@Sandblasters]

I found this on ebay maybe it will helpo www.ebay.co.uk/itm/352768963124?var=622075100715&chn=ps&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&itemid=622075100715_352768963124&targetid=1139674278907&device=c&mktype=pla&googleloc=1006691&poi=&campaignid=12126112989&mkgroupid=118099230938&rlsatarget=aud-381667280803:pla-1139674278907&abcId=9300482&merchantid=6995734&gclid=Cj0KCQiAnKeCBhDPARIsAFDTLTLPjYsj8f-Wg85ExDIgAO_ePOB2xtUtZCloqj9WKzJHt5tSy9oLONUaAnK3EALw_wcB

[@makz6108]

Can u replace the whole thing?

[@Sandblasters]

Yes the whole tap is available

[@UshanWijesekara]

Hi dear friend, my washout valve broken 😢 i wanna completely remove and freshly install new valve please help me by providing the ideal valve type, size, and the proper steps to fix this problem 😢 thanks

[@Sandblasters]

Some IBC tanks the valve is sealed in and cant be charged. It depends on which IBC you have

[@UshanWijesekara]

@@Sandblasters ok this one is removable

[@carlalarson1431]

This video isn't much good unless we can find the parts to do it. Please provide a link other than the one you have because it goes to nothing. I got so damn excited to find an answer and yet I don't have an answer I'm left with more questions