Replace Honda Mower Wheels Front and Rear

Honda mower wheels replacement rear and front. Changing the wheels part number 42710-VE2-M02ZE rear wheel (Replaces 42710-VE2M01ZE), part number 44710-VL0-L02ZB front wheel (Replaces 44710-VL0-L02ZB) is a low skill level task. The mower in the video is a HRR series with a GCV160 engine.
There are hundreds of videos at Know How Now, subscribe so you can always find the channel…. It’s free. I always respect your time and do my best to keep the videos brief, but informative. Check out the channel with this link:
www.youtube.co...
Disclaimer: Due to factors beyond the control of Know How Now, I cannot guarantee against improper use or unauthorized modifications of this information. Know How Now assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Know How Now recommends safe practices when working and or with tools seen or implied in this video. Due to factors beyond the control of Know How Now, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Know How Now.

[@Know-How-Now]

Here's the link to the video showing how to use a harbor freight torque wrench. The wrenches often go on sale for $11.99. If you are a homeowner using the wrench occasionally, it fine. There is a lifetime warranty. kzbin.info/www/bejne/pqKpd4R4qL99rKc There are more repair videos for this mower at Know How Now: kzbin.info/aero/PLvce66kQTjJQMsmkVC0GWRiFes7ac4RhD There are hundreds of videos at Know How Now, subscribe so you can always find the channel…. It’s free. I always respect your time and do my best to keep the videos brief, but informative. Check out the channel with this link: www.youtube.com/@Know-How-Now/videos

[@daisyb5646]

Oh my gosh, I am so pleased that I possibly have exactly the same lawn mower as you, as maintaining it just got easier and way cheaper. In everything you demonstrate, you are by far and away the most in depth and knowledge KZbinr I have came across, albeit plumbing, home, garden, mechanical maintenance, building, and the list is endless! Thank you so much, I just love you 😍

[@Know-How-Now]

You are welcome, Daisy. If you check the comments, I have a link to a playlist with other videos about the mower. Thank you for taking the time to comment. I do my best to make the videos helpful and accurate but brief.

[@riceburner4747]

Directional tread? Do they make rubber tread? Great video.👍🇺🇸

[@Know-How-Now]

There is a pro model Honda mower similar to this one. I looked at the wheels on the pro model hoping that they would be better quality and would fit on this model. Nope.

[@misterfunnybones]

Great video. You can do everything Mach speed with an impact driver, but use the torque wrench for that last turn.

[@Howard2006]

Thank you! very helpful; I have changed the wheels but was not as thorough as you were. I like the idea of setting the ft-lbs at 18-20. My rear wheel has now a bolt that is stuck. I have used WD40 but so far no luck. The other three wheels worked fine to remove and replace. Any help with freeing bolt will be helpful.

[@Know-How-Now]

Try treating it with penetrating oil and giving the bolt a few taps with a hammer. You might have to let it sit over night.

[@Howard2006]

@@Know-How-Now Thank you! When you mention penetrating oil, you mean something other than WD40? Also the hammer is a great idea as well.

[@Know-How-Now]

You might try PB Blaster or Liquid Wrench. There are many brands of penetrating oil. The idea of the tapping is the vibration might allow some of the penetrating oil to work itself into the threads. www.harborfreight.com/pb-penetrant-pro-with-straw-57404.html?campaignid=12144811130&adsetid=147058020133&product=57404&store=3529&gad_source=1&gclid=Cj0KCQjww5u2BhDeARIsALBuLnNcNfz-ZkZs26Fq1iCw0zCjE_eIyMnyFZmbJrNDJBS7QoDcdSAwu9oaAu76EALw_wcB

[@lucannorthemightyandcompan6953]

Super useful video!!! Thank you

[@Know-How-Now]

You're welcome!

[@binhle8731]

Very helpful video, thank you!!

[@Know-How-Now]

You are welcome!

[@s3dchr]

Love that voice

[@appleztooranges]

Awesome video!

[@tomwilliams5598]

are threads the same on other side or opposite direction ? Left vs right hand threads

[@Know-How-Now]

They are all regular threads.

[@andrewsmactips]

Oh, to live in America. Here in New Zealand, torque wrenches start at $80.

[@Know-How-Now]

I think they sell them at a loss. For sure, buying the torque wrench got me to visit Harbor Freight and some return visits too. My brother who is a machinist used one on a production job. It was used hundreds of times before it broke. He returned it and they gave him a new one, no questions asked.

[@2aminitials]

A quality torque wrench costs roughly $80 or more in the USA too. The HF wrench I bought for $12 is rough and not worth it compared to the more expensive CDI torque wrench I bought after.

[@nothankyou5524]

Mine was about $150, if I remember correctly, and that's a long, long time ago. Nuff said.

[@trashguy.]

Mine only lasted 2 years

[@Know-How-Now]

They are pretty cheesy. I looked at putting Honda's commercial grade wheels on my mower, you can't do it. Sadly, so many products are made to wear out/not fixable/throw away or wear out and buy an expensive proprietary part to make the repair. It's a crazy system in which we are burning through the world's resources.

[@mikaelaeloise4190]

Promo-SM 👍