Replace timing belt Yamaha outboards F90 F100 F115

Wymiana rozrządu w Yamaha F90, F100, F115
Lista niezbędnych narzędzi:
Nasadka 10mm
Nasadka 13mm
Nasadka 14mm
Nasadka 22mm
Nasadka 36mm
Kombinerki
Ucinaczki
Klucz dynamometryczny z możliwością nastawienia 40Nm oraz 190Nm
Ściągacz do koła magnesowego
Płaskownik lub kątownik do zrobieni blokady koła magnesowego przy dokręcaniu
Przyda się:
Klucz udarowy
Smar marine
Odtłuszczacz
Dwie opaski zaciskowe
________________________________
Replacing the timing on Yamaha F90, F100, F115
List of standard tools:
10mm socket
13mm socket
14mm socket
22mm socket
36mm socket
Pliers
Cutters
Torque wrench with 40Nm and 190Nm settings
Magnesium wheel puller
A flat bar or an angle bar to lock the magnetic wheel when tightening
Will be usefull:
impact wrench
Lubricant sailor
Degreaser
Two zip ties

[@rafglo1]

Genialny film! Robota wykonana profesjonalnie :) Szacunek dla Pani mechanik :) Z tego materiału, "specjaliści" z ASO wiele mogą się nauczyć.

[@TheDavidov93]

Super film ! Serwisanci płakali jak oglądali 😁 film nagrany profesjonalnie ze smakiem i drobnym żartem 👍 szacun i jestem ciekaw czym dalej zaskoczycie 😁

[@rockwasequim5924]

Nice job, be sure the belt is positioned correctly. It can be upside down and Yamaha says it makes a difference.

[@NotTooHard]

Thank you for your comment. I double checked the instruction and there is information about position (chapter 7 “power unit”, page 24). The belt is positioned correctly - the serial numbers on the belt are not reversed :).

[@grzegxyzasd7207]

Fajnie 😊 to wyszło. Pierwszy raz widziałem suwmiarkę w rękach dziewczyny 🤗 jestem w szoku ładnie to zrobiłaś.... i podkładki do ściągacza, znam mechaników co nie sprawdzą ślepych otworów. 😀

[@user-vw5iv4yf1u]

good job

[@josemanuelfernandezsanjorg7042]

😊

[@shadyfieldhomestead1974]

As far as making sure the correct tension is on the timing belt, is it only that spring that’s giving the correct tension and then tightening that nut to keep that tension? I just don’t want the belt to slip from the teeth, could cause serious damage

[@NotTooHard]

The only element that tensions the timing belt is the spring, you have to loosen the tensioner, turn the flywheel a little to loosen the side of the belt on the tensioner side (so that the spring can tension it), screw on the tensioner and check the tension by moving the wheel to the right by 2* and to the left by 2*

[@racingtech]

Lepiej niż w ASO👍😊

[@danilobiasi4543]

Video top sei stata eccellente 💪🏼complimenti saluti dall’Italia

[@NotTooHard]

Grazie ;)

[@wazup3333]

​@@NotTooHardcan you link the manual instructions so i can print them?

[@NotTooHard]

@@wazup3333 Unfortunately, I have no link. I have got only paper version. Click stop when I am showing manual on the video or try to find pdf version in google using key words ;).

[@shadyfieldhomestead1974]

One more question. Can't I just do my two rotations with the old belt to see that it is in timing and then bring it to TDC, ensuring the arrows are pointing on the camshafts? Also placing a camshaft locking tool. Then remove the old belt and install the new one? Then I guess I would rotate the engine two times with the new belt to ensure that it is in correct timing, and wham, all is in timing and good to go. Wouldn't all that work that way also? I have to get a new camshaft locking tool, as the one I ordered off of amazon won't fit between the camshafts with it's teeth. I imagine it is for a bigger engine, then the 115.

[@NotTooHard]

As you can see on the movie - you do not need camshaft locking tool. Yor have 4 stroke engine, so arrows will coincide every second turn of the crankshaft. Remember that you have signs on 3 places: 2 on the camshaft and one on crankshaft. Before you remove your old timing belt - this 3 signs have to be in correct place as you can see on the movie. Then you can start to put new timing belt :).

[@demetresichinava5088]

👍👍👍👍👍👍

[@mr-alrashoud]

👍👍👍

[@demetresichinava5088]

👌👌👌👌👌

[@CC-vr8wn]

Where did you find the service paperwork?

[@NotTooHard]

You can find it using Google “yamaha service manual f115 pdf” :)

[@iliaortho]

Thank you lady. You available?

[@DjalelMessaoud-vt6uc]

Mliha mliha