Replace Your Old Key Fob on your Chevy Equinox (2010-2017), Buick, and GMC

[@williampiccolo715]

Thank you for the video. You just saved me a $100 and having to keep cut.

[@HomegrownReview]

Thanks for watching!

[@benca6151]

Worked great! Thanks!

[@HomegrownReview]

Glad it was helpful! Thanks for watching!

[@_Teddy_The_Bear]

When I did this my blade wasn't broken. I think I got the new un-cut Flip key fob from O' Reiley? It didn't come with the board, just the case and blade. I popped the Fob open and swapped in the entire circuit board and, key blade. no programing needed that way as it is the same chip and blade. Only glitch was getting the spring for the flip blade arranged correctly on assembly.

[@theresavaughn1171]

So programs the key fob, means the Auto Unlock and lock button will work?

[@HomegrownReview]

That and there are some safety features within the vehicle to prevent theft. If the chip in the fob is not programmed to your vehicle and you use the key the vehicle will stop running.

[@scottytres8085]

Hi, thank you for this! How do you do the start/restart switchover if you only have one keyblade, and it’s in the new fob?

[@HomegrownReview]

As far as I know you need two keys to do the programming.

[@sweetnspicy9387]

Hi, this worked and i was able to start my vehicle with the key but the unlock and lock buttons on the fob dont work. Any advise?

[@Krisp138]

All I need is the stupid pin out so I can put a key in. Is there anything besides a "punch" or whatever you can use?

[@HomegrownReview]

I used a tiny nail to get mine out.

[@_jinxi]

having this problem too. I've even bought different sized nails and pins, and literally beat them into that hole with a hammer for over an hour -- still absolutely nothing. UPDATE for anyone having this same issue -- I gave up on removing the pin and instead popped the whole fob open, replaced the entire keyblade mechanism aka hinge, release button, spring etc. The only tricky part was loading the spring, but it was still way easier than trying to get the pin out🤣 followed a tutorial called "how to replace key fob buttons | chevy cruze" by mindmeld tech here on youtube. this video was super helpful as well, just trying to save other people the time I've wasted if the pin won't move for you either!

[@Kandi_Elena]

Thank you, this is so helpful! I have two key fobs for my 2011 Equinox LTZ i bought it 2 weeks ago from an old couple & the car's like brand spanking new, except for the key fob buttons 😅 Would i be able to do this with both of the keys? I imagine they spent a pretty penny for the second key.

[@HomegrownReview]

I don’t see why not. Just do one at a time.

[@cookieccookie]

How did you get the new key fob cut? Defeats the purpose of switching the key part of you have to have 2 cut keys to program.

[@HomegrownReview]

That’s the point- so you don’t have to get the new fob cut.

[@SeptemberBluez]

Did you not watch the video😂 go look again🤦🏾‍♀️

[@brendabarrett8710]

Hi so I got a small nail, but can't seem to get the pin to come out any advice?

[@HomegrownReview]

Keep pounding away. Once you get it to come out a tiny bit use some pliers to pull it out.

[@brendabarrett8710]

@@HomegrownReview Thank you so much I finally got it

[@brendabarrett8710]

Don't you have transfer the chip?

[@brendabarrett8710]

My new fob came with a screw in the back top part, what is that for?

[@HomegrownReview]

@@brendabarrett8710 I just programmed the new one. Shown in the video. You need a second fob to do this

[@FlippyFlopper-b7i]

Wait so ,,??? if your new key fob blade is not engraved or laser cut then you will actually need a set of two spare keys in order to program it correct???

[@HomegrownReview]

Yes, exactly

[@LadeTygress]

So if your vehicle only came with one keyfob from the dealer... then you have to get them to cut and program the new one, correct?

[@LadeTygress]

Can I just take all the guts out of the broken keyfob and put them into the new one?

[@WhiskeyTangoFubar]

Where did everyone buy their replacement key fobs? Im sure they are not all equal.

[@HomegrownReview]

@@WhiskeyTangoFubar this one is linked in description

[@Vega_Vision]

Why is this not working for me 😮

[@benca6151]

Did you follow the his instructions completely?

[@Robbbed]

Doesn't read after switching

[@HomegrownReview]

You have to program it.

[@michaelanderson5975]

😮 really while you're at it why not replace the vehicle it's a piece of s***

[@HomegrownReview]

K