У меня на фотобарабане для черного тонера появились полосы, похожие на пластиковое напыление, которые сильно портили картинку. Я взял изопропиловый спирт и вату и качественно все протер, результат отличный.
@MrRicoh Жыл бұрын
Обязательно напишите, как долго было хорошо?
@techsupport7197 Жыл бұрын
Should there be developer in the toner? Or just toner? Is it possible to change the media separately? What is the resource of the developer unit?
@MrRicoh Жыл бұрын
Yes, there is some developer in the toner, but these proportions are strictly protected by the manufacturer.
@techsupport7197 Жыл бұрын
@@MrRicoh If there is developer in the toner, then it is constantly being added to the development unit. But the developer unit does not have a waste media outlet. Inconsistency.
@nunolopes4093 Жыл бұрын
Hello Thomas I have one Ecosys M8124cidn and now gives an error 7904. Replacing Drum Y will solve the problem?
@MrRicoh11 ай бұрын
Have you done anything with Drum Unit?
@nunolopes409311 ай бұрын
@@MrRicoh No. Didn't touch anything. What is this error?
@nunolopes409310 ай бұрын
@@MrRicoh Can you help me? do you have for sale the kit?
@MrRicoh4 күн бұрын
@nunolopes4093 I wonder if the repair was successful? Is the Kyocera functional? What was the cause of the fault? Best regards.
@rafaelmessiasleite5076 Жыл бұрын
Tenho uma impressora dessa que foi danificada devido a um acidente, porém a unidade reveladora está boa, posso fazer uma limpeza nela? Ou é melhor deixar como esta? Por que quero usar em outra impressora quando for preciso
@MrRicoh Жыл бұрын
Não recomendo limpar a unidade de revelação.
@rafaelmessiasleite5076 Жыл бұрын
@@MrRicoh e a unidade de imagem? Aquela maior que fica logo em cima
@DenSpa8711 ай бұрын
Hello. Thanks for the tips I was wondering what to do next though since after changing the developers and drums my colors are off. Thanks
@MrRicoh11 ай бұрын
With new original developers you got the codes from the manufacturer. Give me the codes and I'll check if they're up to date.
@DenSpa8711 ай бұрын
@@MrRicoh thanks for the reply. By codes you mean serial number, right? I changed maintenance kit B, at work I’ll see if I can find the codes and let you know. Thanks
@DenSpa8711 ай бұрын
@@MrRicoh so, I couldn’t get my hands on the codes but in the meantime the Kyocera technician emailed me back and suggested that my cyan Developer is probably clogged (since in the samples I send him he noticed no cyan) and I must replace it or hope it will eventually unclog 🤷🏼♀️
@DenSpa8711 ай бұрын
On the Cyan developer I’m holding now I see the code *MVT049910135* DV8325C Not sure if this helps but thanks for your time
@MrRicoh11 ай бұрын
I hope you will make it.
@vivianelmido13833 жыл бұрын
Sir, can you recommend this unit to use compatible toner?
@MrRicoh3 жыл бұрын
These devices are very sensitive to non-genuine toners and there are a lot of problems after that. I recommend using only original toners. KZbin SUPPORT: kzbin.info/door/OHtXTtGHj33pUm8Gf2FH3Ajoin PATREON: www.patreon.com/CopyExpertMovieStudio PATRONITE: www.patronite.pl/1796
@enda45243 жыл бұрын
hello I have a problem on a Kyocera FS 6030 I'm a dealer does the waste toner container light sometimes come on blocking the machine? could you tell me the solution, what can it depend on? thank you .
@MrRicoh3 жыл бұрын
Yes, I had such a problem with the printer. Clean the sensor behind the waste toner box with a vacuum cleaner, and install a new waste toner box to be sure. If you do not have a new cartridge, remove the toner from the old one, pour a little soap and water. Shake and pour out the dirty water. Then dry the old cartridge and install it into the printer.
@XJHOMESTUDIO3 жыл бұрын
Thanks.
@MrRicoh3 жыл бұрын
Welcome.
@GlaydsonAlvesMoraes2 жыл бұрын
Hello man, can help-me? Cassete1 dont up when i conect.
@MrRicoh Жыл бұрын
If you had a kasey error, you need to reset the machine in service mode.
@josejohnpaulfejer31253 жыл бұрын
hello sir,can you do disassembly of developer unit of kyocer m8124cidn
@MrRicoh3 жыл бұрын
But why? There is no market for developer powders alone.
@josejohnpaulfejer31253 жыл бұрын
@@MrRicoh what is the reason why the magnetic roller stopped attracting toner powder?