Replacement of garbage disposal with Moen Host Series 3/4 HP || Best Garbage Disposal replacement

Replacement of garbage disposal with Moen Host Series 3/4 HP | Best Garbage Disposal replacement
A Warm Welcome To My Channel Jason Whitaker The Diy Dad
To Subscribe: cutt.ly/gTJ2EBO
Moen Garbage Disposal On Amazon: amzn.to/3cetsOh
Hello There!
Welcome to my channel Jason Whitaker The Diy Dad. Jason Whitaker The Diy Dad is here with a new video. Today’s video is about the Replacement of garbage disposal with Moen Host Series 3/4 HP. I hope you enjoy this video.
In this video, I have discussed how I Replace garbage disposal with Moen Host Series 3/4 HP. Last night in my kitchen my wife was cleaning the dishes and when she went to put the detergent in the dishwasher she noticed that the bottom of the cabinet was wet. Our garbage disposal, Insinkerator Badger 1, quit on us over the weekend and was leaking from the bottom. I believe it was original to the house making it 11 years old. We went out and got a new Moen from the local Home Depot and installed it ourselves. Also, I replaced it myself. Easy to do and you can do it too.
So watch this video till the end to gather a new experience.
📽️Watch Related Videos📽️
✔️Diy- 2021 October 2 Week Seeding
➣ • Lawn Seeding Update Af...
✔️Diy- Basketball Goal Find And Install From Facebook Marketplace
➣ • DIY- Basketball Goal F...
✔️Diy Dad Pool Build Part 2
➣ • DIY DAD Pool Build Part 2
✔️Diy Dad 16x32 Pool Build Part 1
➣ • DIY Dad 16x32 Pool Bui...
➣ Moen Garbage Disposal on Amazon:
➣ amzn.to/3cetsOh
Thanks for watching the video from my channel. Let me know in the comment section if you have enjoyed this video. And introduce yourself to me in the comment section. Share this video with your friends who are looking for these types of videos.
Don't forget to subscribe and click the bell icon for Jason Whitaker The Diy Dad
#garbagedisposal
#howtoreplacegarbagedisposal
#jasonwhitakerthediydad
#howtoreplace
#garbagedisposalrepair
#howtofixgarbagedisposal
#fixgarbagedisposal
#howtoinstallgarbagedisposal

[@sandspecans]

Thank you! I couldn’t have done it without you!! 😊

[@yoAdriana1017]

It's been 3 weeks and she's still working!! Thank you!! I'm off to build a fire pit now. Really trying to kill this horrible bush thing while I'm at it. But thanks again!

[@JasonWhitakerTheDIYDAD]

No problem. Look into solo stove. I have one and love it. Got the heat shield too to go with it. Worth every penny to have a near smokeless fire.

[@yoAdriana1017]

I'm kinda glad that happened at the end because I needed to tighten things too and I would have been lost. Thanks again!

[@JasonWhitakerTheDIYDAD]

No problem! Glad it all worked out! Thanks again for watching.

[@SavIzzi]

Great video thank you Jason.

[@r_cab314]

That was a fun project when I replaced mine a few months back.

[@JasonWhitakerTheDIYDAD]

Hopefully it wasn't too bad for you. With filming, I had it all done in about 30 minutes. Thanks for watching!

[@muslimmedic]

Thx so much for the video. You were super helpful. The pace was great and the way you explained everything along the way was excellent. 👍🏾

[@JasonWhitakerTheDIYDAD]

Thanks for watching!

[@Peter-kz4kl]

This was a very informative video…if I may add a few observations: 1) instead of cutting the disposal elbow b/c it was too long, I just re-used the existing elbow from the old disposal; 2) I didn’t have a snap ring kit but it didn’t take more than a minute getting snap ring on; 3) the old disposal (insinkerator) was very tough to get off, partly b/c (in error) I unscrewed the phalange and realized I needed to keep it screwed, also it was really stuck in there but patience and perseverance got it off 4) there was not a “front” marker anywhere on the sink parts so I assumed it didn’t make a difference and 5) my previous set up the dishwasher didn’t connect thru the disposal, and when I changed that to connect to the Moen disposal, the hose didn’t fit the disposal dishwasher, so I had to go to local hardware and get a hose connection kit that fit the 7/8” disposal hole. It was my first garbage disposal replacement. Took longer than it should but now it runs great..thanks for your video.

[@MutsPub]

Thank you.

[@JasonWhitakerTheDIYDAD]

Your welcome. Appreciate you watching.

[@terribyrne8653]

Best video ever. I did everything you did, cut wires, hardwire, install. Thank you so much.

[@JasonWhitakerTheDIYDAD]

Thank you for watching and glad it helped!

[@beyondTABU]

I’m watching this now to install mine and I’m appreciating the step by step!

[@michaelmccrimmon]

excellent video!

[@JasonWhitakerTheDIYDAD]

Thanks for watching!

[@WaltDittrich]

When switching from an Insinkerator to a Moen, is it NECESSARY to change out the drain assembly/flange for the sink? Or can I just put up and twist in the new Moen? What are the advantages for changing it out? (thanks for the great video!)

[@djjinxman1]

Not necessary. It’s a “universal” fit. I just replaced mine with a moen…. I chose to replace the sink assembly to freshen up the look. But definitely not required.

[@WaltDittrich]

@@djjinxman1 Thanks! Yup. Super easy. Unplug the old one. Disconnect the drain pipe and tube (mine didn't go to the dishwasher, but was some sort of vent). Twist the disposal off. Easy! Twist the new one on. Attach the drain pipe and tube. Plug it in. Voila!

[@WaltDittrich]

One issue I did have (DO have) is the Moen didn't come with the plastic/rubber "fins" for the top of the drain. They seem to be built into the drain assembly/flange. So, without a sink strainer, I can look down the drain right at the garbage disposal blades. A bit unnerving, but I suppose as long as I don't put my hand down there... 🤷🏻‍♂️ (no kids in the house)

[@JasonWhitakerTheDIYDAD]

Please don't stick your hand in the disposal while its on! Hahaha. Appreciate the comments and you watching! Glad it helped.

[@ShineVanguard168]

What brand of cable strain relief (clamp) did you use to hold the cable tight?

[@Mr_Gazpacho]

Get a 3/8" Halex clamp connector. That did the trick on mine.

[@yoAdriana1017]

Ok so I'm pretty jealous bcuz my box did not come with a snap ring tool. Can I buy one? Driving to home depot or Lowe's on a Sunday in Mississippi is probably THE MOST dangerous thing that could be done....lol

[@JasonWhitakerTheDIYDAD]

Mine came with the snap ring tool. Double check your box. Appreciate you watching!

[@yoAdriana1017]

It's a very detailed video, I really appreciate it! I'm just going to return this one and pray the country folk don't kill the Yankee.