Easy DIY... Moen Garbage Disposal EX75C 3/4 HP Installation / replacement

This video is about garbage disposal swap we needed since the old one seized.
This is the model I got amzn.to/3kTGrao
It's cheaper elsewhere but I wanted to provide that link for reference.
you'll also need plumber's putty... amzn.to/3mWqnqa
That's actually cheaper than local!
Here's ALL my Amazon tested products:
www.amazon.com/shop/robdaman
********************************************
Follow me on instagram for sneak previews and info I don't put up on KZbin @_RobDaman
*******************************************
items used to produce this video:
Samsung S20 Ultra 5g amzn.to/35om3HY
DJI Osmo Pocket get it at amazon amzn.to/2ED2pNR
get it from DJI direct! click.dji.com/ANqpQOnR0esviOK...
Other stuff I use...
Sony A7iii camera amzn.to/2p1J8f2
Tamron 28-75 2.8 lens amzn.to/2x6MhOF
DJI Ronin S gimbal amzn.to/2CIjIwO
smooth q mobile phone stabilizer amzn.to/2vuX5Ho
Samsung 64gb microsd amzn.to/2CuKxkf
Takstar boom microphone amzn.to/2q7SbfC
Blackvue DR900S-2CH amzn.to/2PJ2thi
Blackvue B-124 Power Magic Ultra Battery amzn.to/2MVrLKJ
Blackvue Genuine Coaxial Cable Rear 10m for Hardshell installs amzn.to/2MWUyhN
Blendmount Mirror Mount amzn.to/2wh0Kba
Samsung 128gb Endurance microSD amzn.to/2yYTm5B
#plumbing #garbagedisposal #kitchensink
______________
Disclaimer:
Due to factors beyond the control of Rob Daman, I cannot guarantee against improper use or unauthorized modifications of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control , no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Rob Daman.

[@RobDaman]

This video is about garbage disposal swap we needed since the old one seized. This is the model I got amzn.to/3kTGrao It's cheaper elsewhere but I wanted to provide that link for reference. you'll also need plumber's putty... amzn.to/3mWqnqa That's actually cheaper than local! Here's ALL my Amazon tested products: www.amazon.com/shop/robdaman

[@IndigoVagrant]

How nice to have a kid who is helpful and interested in getting the job done. Great video, thank you!

[@RobDaman]

Thanks for watching!

[@YouTubeBinging]

Watched this 2 years and about to actually use this video to help me replace my unit with this exact unit. Btw your son is precious ❤

[@RobDaman]

Thanks. Our disposal still going strong 👍

[@eenix0]

This was both incredibly helpful AND absolutely warmed my heart the way you interact with your family. Thanks for such a great video, and for the help!!!

[@RobDaman]

Thanks for the positive feedback

[@boblevey]

I like how patient you are with your son!!!

[@dapperjohnjb]

I thoroughly enjoyed the informative video 👏👏👏. My 15 year1/3 hp Insinkerator (home built in 2006) started leaking through the bottom,which my wife was not happy with,lol. I went to the big box store and bought the Moen 3/4 hp,which by coincidence is the one in your video. I watched the video, then took out the old one with your tips,installed the Moen and 90 minutes later,I was done! All good and no leaks! Thanks for the tutorial.

[@lisalove1837]

what was the cause of it leaking from the bottom? we are having the same issue!

[@personxyz1840]

Followed your video, able to replace my garbage disposal. You saved me 100$, Thank You and God bless you and your family!!

[@RobDaman]

glad to help

[@Latifthecreator]

That’s so awesome you’re teaching your son, I love it. 😍

[@yoAdriana1017]

It's been 3 weeks and she's still working!! Thank you!! I'm off to build a fire pit now. Really trying to kill this horrible bush thing while I'm at it. But thanks again!

[@RobDaman]

Awesome

[@tylerl6589]

Thanks for the video, your son did a great job!

[@RobDaman]

Thank you

[@alexvaldes7503]

Thank you guys for this video. I just got the same one today at the HD because my last one seized after a bunch of glass got stuck in the blades and gears. This really helped me get a better understanding on how to install it. Thanks!

[@RobDaman]

glad it helped. thanks for watching

[@damonbethea3973]

Great job and teamwork sir.. Thanks for the details, I just purchased one today because my old disposal started leaking.

[@josephcooper8736]

It always pays dividends to read thru the manual 1st. I tried not doing that and ended up using duct tape to hold the flange up - it worked but the little blue plastic piece they give you and in the instructions would be most useful. Also since I was doing this job by myself - it always better to have someone around to assist or if there are issues. All the time I was working on it I was worried about mixing "Power" - and water. I could have been zapped or something and be in real trouble. Over all the product fit well and I didn't have to buy a power plug like the others, I wish the Stainless steel blade mode was more in my price range - but glade everything works and was about $20 cheaper than the competition due to power cord included.

[@Peter-kz4kl]

This was an informative video…if I may add a few observations: 1) instead of cutting the disposal elbow b/c it was too long, I just re-used the existing elbow from the old disposal; 2) I didn’t have a snap ring tool but it didn’t take more than a minute getting snap ring on; 3) the old disposal (insinkerator) was very tough to get off, partly b/c (in error) I unscrewed the phalange and realized I needed to keep it screwed, also it was really stuck in there but patience and perseverance got it off 4) there was not a “front” marker anywhere on the sink parts so I assumed it didn’t make a difference and 5) my previous set up the dishwasher didn’t connect thru the disposal, and when I changed that to connect to the Moen disposal, the hose didn’t fit the disposal dishwasher hole, so I had to go to local hardware and get a hose connection kit that fit the 7/8” disposal hole. It was my first garbage disposal replacement. Took longer than it should but now it runs great..thanks for your video.

[@r5an]

Surprised how hype the kid was about it 🙂

[@jeremydalejon]

Thanks brother, I suck at this stuff and you helped me greatly. Lord bless you and your family!

[@RobDaman]

Glad to help. 👍

[@alexandernatanzon6009]

Followed this guide because I just bought one thank you so much guys and I appreciate the video!

[@jackmarr1776]

Thanks a lot brother, you gays really helped me figure this thing out, your son is really dedicated.

[@jeanniesanders6158]

What a great dad!! And, Jesse, you did a wonderful job helping. You'll soon be installing by yourself! I bet your family is proud of you!

[@RobDaman]

Thanks for the kind words

[@frankj.oliveras1208]

Thank You! Just replaced mine last night after watching your video.

[@RobDaman]

Glad we could help

[@sethhoward136]

Great video. Love the fact you do it with your kids.

[@jpezy901]

Just got this model, thanks for the video. it was really helpful.

[@p8ryot]

very detailed and enjoyable to watch, Thanks

[@colejackson6276]

Thanks for the upload about to install one tomorrow had no clue how to do it until now!!

[@RobDaman]

Glad we could help

[@shawndubose3365]

Thanks for the video guys! I just watched your vid and installed mine! Thanks again.

[@JMarieTaylor]

You guys are the best! Replaced mine today easy breezy 😌

[@RobDaman]

Awesome

[@gregorycook5305]

Thank you for the video. This really helped with my garbage disposal installation.

[@eddiemcdonald4720]

Great video. Much more helpful than the paper instructions. Got it installed perfectly.

[@RobDaman]

Glad we could help

[@albertor.6635]

Thanks for the video appreciate it knocked it out in 5 mins

[@RobDaman]

Glad to help

[@patrickgregory7920]

Love how you involve the kids!!!! Good job dad!!!!

[@RobDaman]

Thank you for the positive feedback. Happy new year

[@Kzerrr]

Thanks for the great video!! New garbage disposal is in!!!

[@zaiderzaij6285]

You have a wonderful family! Nice job!

[@RobDaman]

Thank you so much!

[@fady904]

Thank you. God bless you and your family.

[@PatrickD-bq3ws]

Thanks for posting this. I was installing the same model and this was perfect.

[@RobDaman]

Glad we could help.

[@stevenstevenson3351]

You guys are AWESOME!!!!

[@tiggerr90s]

Thank you for the helpful video!

[@RobDaman]

Glad it was helpful!

[@RD-sl8yl]

Super helpful guys!!!!! Thank you!!

[@mauimatt17]

Thank you Jesse!

[@frankw2328]

Installing this this same one now.

[@ryanmansell605]

good work jesse 👍

[@jenny-DD]

Nice to see

[@yoAdriana1017]

Also did you replace a Moen or a different disposal. You and your kid are cracking us up! Awesome video!!

[@RobDaman]

Old unit was a cheap no name that kept jamming. Moen is a beast

[@curtisgray1833]

How do you rate the performance and the noise level compared to the disposer you removed?

[@RobDaman]

The old one was 1/4 hp so definitely a power difference I could tell immediately. Also MOEN's run at a much faster RPM. Noise is actually lower because of the casing of the MOEN which appears to be insulation. I think it's an awesome unit.

[@jonathandorton6512]

I came here for the last step and the video is blurry and therefor unhelpful lol

[@Firedawg247]

Do you guys have a loud click when you turn it on? I installed mine turned to the side to fit the pipes I already had, not sure if that would be doing it, thanks!

[@RobDaman]

Yes it's normal since it's spinning up so fast. If it keeps on clicking then you have some issue

[@olgapaulus7299]

Great kids❤

[@RobDaman]

Thank you

[@mariaraya5089]

How difficult was it to break the old putty seal loose from the sink? I remember exchanging a faucet and had a heck of a time undoing the old faucet’s putty seal

[@RobDaman]

i didnt have issues but really old sinks could

[@yoAdriana1017]

So since it's been a year, do you like the Moen? I'm having to replace the insinkerator that was already installed when I bought the house..

[@RobDaman]

it's a keeper

[@johnmontana18]

WAS THAT blu plastic RING RETINER TOOL in you box or did you buy it somewhere?

[@RobDaman]

It was included

[@myke2k2]

What is the switch that this is plugged into? Good video - thank you!

[@RobDaman]

it's similar to this amzn.to/35aeklh

[@aunabreslingaming3279]

did you try to fix your old one? also you meant to say the sink guard disposal has a non standard mount (which it does)

[@RobDaman]

Yes I tried to fix it several times and it would work then get stuck. It was over 10 years old so it was time to upgrade.

[@aldotheapacheable]

Just got one of these does yours click when you turn it on ?

[@RobDaman]

Didn't notice. You can hear it in the intro

[@bhimdahal3567]

Could not see full install in the end

[@Me60262]

So did you have to redo any wiring in the unit? Seems every other video I've watched involves that.

[@RobDaman]

Fortunately no. Many disposals need wiring installed but not this model 👍

[@Me60262]

@@RobDaman Awesome. Thanks for clarifying!

[@AaronHatcher]

My Moen unfortunately didn't come with a dang snap adapter

[@RobDaman]

🤨

[@salvatoresciorta5301]

Lol kids are annoying af 🤣 gotta love em though.

[@caseyflyby]

Peace out

[@jaydenbatch]

why was this useless he flashed the parts in front of the camera for 30 seconds 😭

[@jayhogan1166]

Try telling your family friends dogs neighbors whoever that you're about to film a video and we tuned in to see the main subject not all this other stuff couldn't watch shut it off

[@Dinkin_Flicka]

Damn, it must suck being a loser.

[@jayhogan1166]

Brilliant.... shit for brains

[@praisethelord8592]

Great job