Replacing a BPV on a MX-13 | Paccar Back Pressure Valve

Replacing the BPV on a T680 with an MX-13.

[@BLAKEDILLONRACINGDEVELOPMENT]

KENNY RODGERS!! love the videos man

[@antonioorozco4896]

Yeah, my fellow techs love that. Thanks for the support.

[@MockOverdrive]

Video was short and helpful 👍 I know there's a gasket between the BPV and Exhaust Pipe, my question is was there a gasket between the BPV and Turbocharger? I didn't see one when i pulled it, just rust and possibly old red silicone. The BPV --> Turbo has a circular pin at the top, so im guessing if it did have a gasket it'd have a tiny hole or notch? 🤔

[@martinnaranjo5747]

Great video 👍🏽. Does a bad bpv effect the jake brake performance ?

[@workingmansrestorations7071]

I have a spn5112 09 code, useto come on when just cold... But its coming on more... Where are you located?

[@shermant9440]

What is the purpose of the bpv Does it have anything to do with power and the turbo?

[@davidwilliamson567]

Is that Dwight I hear in the back ground?

[@kyriacospetrou299]

Hello. The 7th nozzle-dosing is only activating on regenaration to increase the exhaust temperatures ? Because I have an issue with regeneration and the exhaust temperatures is not going above 200oC..

[@antonioorozco4896]

Sounds like DPF and DOC may be plugged. May need to monitor temps and diag accordingly.

[@iuriireshitnyk9012]

Just wondering, if there’s an issue just with that thread, wouldn’t it be cheaper for owner to run a bit bigger thread and save at least 2k?

[@antonioorozco4896]

I definitely wouldn't recommend it, because you'd also have to drill through the 7th injector to make the whole bigger.

[@idksht]

@ Antonio Orozco does the BPV require programming or is it plug and play?

[@antonioorozco4896]

Technically plug and play, no reprogramming unless ECM needs an update. Otherwise, sometimes you can simply clear codes or you may need to drive truck for a while, depending on derate code, if you have an active code.

[@carmenherrera7017]

what software you are using for paccar ??????thank you for the video

[@antonioorozco4896]

We use Davie 4 at the shop. Thanks for watching. Blessings.

[@jesusadavila]

Where is your shop located I’m in San Antonio often would like to set up an appointment to get my overhead done

[@antonioorozco4896]

Shoot me a DM on Instagram. instagram.com/orozc07/

[@PedroooDiaz320]

I got a code that’s saying P047C What you think it could be man

[@PowerStrokeJude]

I want to start working on the big trucks, maybe even heavy equipment tio

[@antonioorozco4896]

Do it, man. I prefer HD trucks over automotive work.

[@hauloffjunkremoval8304]

Started about a year ago. Best decision I’ve ever made.

[@sandhusaab3077]

@@antonioorozco4896 why.?

[@antonioorozco4896]

@@sandhusaab3077 a lot more space to work with. Better pay. Not everyone wants to work on diesels.

[@jodydye3025]

I have a whistle I can't find. Don't lose any boost and can't find any exhaust leaks. It whiskers as I let off the accelerator on a hard pull. Could it possibly be a leaking bpv? Thanks in advance.

[@antonioorozco4896]

Could be a number of things. BPV, EGR, or Turbo.

[@brownwrench]

Huge PITA when you have to update all the coolant lines with this job.

[@prince9815505888]

Where is ur shop

[@cruzesparza9468]

What is the price for thi piece

[@db9872]

Were you getting any squealing noise from the BPV before you replaced it?

[@antonioorozco4896]

I'm not too sure of the customer was hearing squealing. I just drove it in and replaced it.

[@oscarislas9787]

When I pull hard I heard a squealing also when engine break is engaged. Did you had same issue? Did you solve it?

[@Dattdudebadd1]

@Oscar Islas i have similar issue. Ive also witnessed smoke come from that area.

[@terryborth7436]

I have same squealing noise when using Jake's and they come on hard and weak like theyrs pulsating

[@dmitrijnovik3414]

engine does not start due to check valve BPV DAF106 error P1026 P1020 P1021 P1022

[@cameronforeman1043]

You didn’t show how to get those pain in the ass hoses off of the back side.

[@elcatra1821]

What city you in..

[@antonioorozco4896]

San Antonio

[@roddea8336]

Hey bro can a bpv that's failing cause issue with the engine brake

[@antonioorozco4896]

Possibly

[@jimmyerobinson1439]

Are the coolant line that run underneath the bpv known for leaking? I have a coolant leak in this area and was wondering before I replace. Thanks in advance!

[@antonioorozco4896]

@@jimmyerobinson1439 they have been know to leak. Depending on where it's leaking, you can either replace a washer ring or o'rings. The lines themselves won't leak unless the rubbed against something.

[@brownwrench]

When everything else is good and it won't start fuel dosing in a regen due to lack of temperature, do the BPV

[@berniesands6201]

Where's your shop located at? I need a good Paccar mechanic.

[@antonioorozco4896]

You can send a message on Instagram. instagram.com/orozc07/

[@Ken-rq3yl]

I call BS on this post. Host says "We're going to change the BPV...Alright, it's gonna be fun". The the next shot is, "Alright, we got the BPV off already". Poster shows coolant drained, no explanation for anything.

[@sparshrajput6348]

It is same as cgi control valve

[@harryjudge6583]

how much the price of back pressure valve

[@antonioorozco4896]

Not 100% sure, but it's pricey. 😬

[@johnsonberry6750]

U really didnt have to remove the part just because a bad thread. U could rethread the hole ez!

[@antonioorozco4896]

As stated in the video, it was done upon customer's resuest.

[@alw7810]

This is why we hate these mechanics like this . slow drll tap 10 minutes plus new screws simple fix $50 . No sir we have to change the whole Bpv out for that TINY SOOT spot now your new Bill is $3500 8hrs labor.. SHAME SHAME SHAME!!!

[@antonioorozco4896]

Like I said it was by customer request. Be blessed.

[@917saturnino]

@@antonioorozco4896 oh so it is the customer that wanted to throw thousands of dollars into a easy fix… shame

[@user-yd9sx8pr4c]

No info to understanding what he did

[@antonioorozco4896]

Pretty straight forward. The BPV was removed and replaced.

[@user-yd9sx8pr4c]

@@antonioorozco4896 but he never gave the real reason he did it other than one bolt was messed up.

[@antonioorozco4896]

@@user-yd9sx8pr4c and that it was replaced upon customer's request.

[@grumpystruckshop3807]

Havn,t you heard of helicoils, 15 min,repair, cost $1

[@antonioorozco4896]

I definitely have heard of helicoils, lol. But as I said in the video, customer made the decision to replace yhe BPV. God bless you, friend.

[@aurelnegrea7617]

What a waste of money!! Fkrs make it complicated unreal. It’s all about $$$.

[@antonioorozco4896]

When the repair was done on this particular truck it was donw upon customer request to replace it. Be blessed, bud.

[@Mike_Greentea]

Horrible music! I’d be pissed if I was forced to work in that environment everyday.

[@antonioorozco4896]

That was a co-worker who was across from me.