Replacing a Broken Impulse Jewel ( Quick Tips ) Part 2

  Рет қаралды 5,398

The Watchsmith

The Watchsmith

Күн бұрын

Пікірлер
@Saving-Time
@Saving-Time 2 жыл бұрын
Thank you informative and to the point close up camera work makes it very easy to see. I'm just taking the first steps into watch repair. I've got a lot to learn and people like you make that process possible. Thank you
@DavidvanNiekerk
@DavidvanNiekerk 3 жыл бұрын
Thank you this. But where part 1?
@klinej54
@klinej54 3 жыл бұрын
I was thinking the same thing.
@jimcricket1
@jimcricket1 2 жыл бұрын
I'm watching this because after taking apart, cleaning and reassembling my first watch, after reassembly the balance spun nicely but pallet fork didn't move. Upon closer inspection the roller jewel was missing. Looks like this watch will never run again because this is way beyond any ability I could ever hope to acquire. I see your hands shaking in millimeters, mine would shake right out of view. I think I used too much detergent in the ultrasonic solution and dissolved the shellac. Pallet jewels might come out next.
@thewatchsmith2773
@thewatchsmith2773 2 жыл бұрын
Ultrasonics can be the death of weak shellac. Even though I have a 4 jar machine, the pallet fork and balance still get hand cleaned. I feel the pain😀
@brightsparkey949
@brightsparkey949 2 жыл бұрын
To reduce hand shake, make sure your hands are well supported - find something to rest the sides of your palms on and if possible your fingers too so that there is minimum of your hand free to move, but you can still work - curl your fingers so they all rest on each other to give a solid base. Properly supported, shake will be minimal. And be relaxed - a deep breath followed by breathing out gently during fine oeprations can help. A positive attitude makes a difference too :-) you can do it! You'd be suprised how much the shake dies down :-) Good luck, and give it a try - there are plenty of watches out there to gain your skills on, and the failures are a source of spares.
@melody3741
@melody3741 2 жыл бұрын
This is a great tutorial but that part thats cracked never touches the fork.
@thewatchsmith2773
@thewatchsmith2773 2 жыл бұрын
That’s true but remember in in watch repair everything matters. You wouldn’t know if the jewel had been weakened and have a crack running through it that might split apart down the road. You would never want to leave it like that.
How To: Repairing a Broken Balance Staff on Hamilton 1937
24:13
Magic Watchmaking
Рет қаралды 10 М.
Repairing a Faulty Watch Balance in a Hamilton 917 (Part 4)
12:04
The Watchsmith
Рет қаралды 7 М.
🎈🎈🎈😲 #tiktok #shorts
0:28
Byungari 병아리언니
Рет қаралды 4,5 МЛН
Liquid Shellac Impulse Jewel
43:41
JD Richard Entertainment and Watchmaking
Рет қаралды 480
Balance staff repair - The Easy Way
11:15
Chronoglide Watchmakers
Рет қаралды 9 М.
Watch fault finding. Episode 2. Repair the impulse jewel
8:24
Watch Repair Channel
Рет қаралды 69 М.
Illinois watch restoration part 6: refitting the impulse (roller) jewel
21:14
Timely Vintage Watches
Рет қаралды 3,6 М.
How to place your balance wheel easy and safe! Tips and tricks (5min)
5:26
Chronoglide Watchmakers
Рет қаралды 43 М.
Hammer Time! Reduce hole size - Part 2of2 (Hammertime)
10:09
Chronoglide Watchmakers
Рет қаралды 10 М.
Setting an Impulse Jewel- Made Easy
26:25
Watch Repair Tutorials
Рет қаралды 17 М.
Hairspring straightening 101
22:56
Repivot22
Рет қаралды 117 М.