Hey Nick, if it doesn't interfere or delay your work, I would love to see your repair videos of customer cars.
@scorcha1005 жыл бұрын
Its amazing watching your builds but a mans got to earn a living every way possible so working on customers cars is just as important. Keep up the good work 👊🏾
@barianbarian6983 Жыл бұрын
Very good job we appreciate you awesome !! And thanks for sharing
@bena92215 жыл бұрын
Will be great to see all your customers rebuild, since you are educating us why not show as every work you touch Mr. Nick... Anyway thanks in advance
@brianmac31945 жыл бұрын
Awesome video and excellent content and yeah would love to see more of this sort video
@Macade_Olson3 жыл бұрын
How much does a job like that cost? Thanks
@ronaldzeoli75284 жыл бұрын
I'm surprised that you didn't replace the inner quarter since you had it in the donor part I think the industry standards is to replace damaged metal.
@karlacontreras50585 жыл бұрын
hi nick. one quick question. if you don't mind saying how much you charge for this job. I do this kind of work myself and like how you work. thanks
@johnnyboy8305 жыл бұрын
Looking good Nick. If you want to include customer builds go right ahead. More content the better.
@gbattilanaf5 жыл бұрын
Why not replace the wheel well if its right there?
@zanchescampos22484 жыл бұрын
all the job not looks professional .It is not within the recommendations of Nissan to make this repair a quality inspector immediately disapproves the work that repair is NO SAFE
@stuartanderson19085 жыл бұрын
Nice video Nick. Bring on the customer work. It is very interesting to see the frame being pulled out. If you could explain that part some more iit would be nice.
@miketzul40432 жыл бұрын
That’s amazing job good talent if you don’t mind give me some advice I’m going to try to change quarter panel of sonata 2013 thanks
@travlite84965 ай бұрын
I would get fired at the dealership i work at if i did that inner wheel well like that.The next wreck could be fatal from the next accident! The TDS sheet should tell you excactly how to put that car back to original oem spec.
@ruslangorenkov86912 жыл бұрын
How much will this cost to fix quarter panel exactly size like this one on this video repaired buy this guy.?
@bruces124 жыл бұрын
Great video, Nick. Really enjoyed watching your rebuild of the quarter panel. Please be careful with that darn grinder...it could have been worse!!
@joshbrewster40413 жыл бұрын
hey how did you remove the quarter panel window ? im not sure how to remove mine properly... I bent up mine removing it off the damaged quarter panel, I don't wanna do the same to the new quarter panel I would like to complete my welds how yours are connected rather then not removing window or should I just weld it above the window?
@loopy45175 жыл бұрын
Nick, your videos are some of the best on KZbin. You got major skills, man. Those wire wheels are wicked when they get away from you. I recommend a face shield on top of the safety glasses.Those wires are like flying needles when they come off. Keep doing what you're doing. It's awesome.
@a.c.king-dk5yl1ep2m5 жыл бұрын
What every you choose to do, customer work or, your own builds, it's a master class on how to do the work properly, and efficiently. Even when the customer wants limited work done on a tight budget.
@d.rosado94705 жыл бұрын
yes more videos like this one,you made it look to ease
@ericgonzalez38975 жыл бұрын
You do great work. Your channel started with customer builds. I say bring them all on.
@miguelcastillo67083 жыл бұрын
Would you know how much did that quarter panel cost? plz thank you
@quezlee79468 ай бұрын
Should have kept building would have been rich cause he was good at this
@ron51185 жыл бұрын
Man your pull machine pulls the metal with no problems.
@frankkapsner1885 жыл бұрын
Wow , you make it look so easy , great video Nick
@gerardoarredondo56032 жыл бұрын
I really hope people are not watching these videos and think this is what us professional do..... Have you ever heard of I-Car or OE replacement procedures????? You should really emphasize that you are not a professional.....
@okiagreebut56092 жыл бұрын
How are you supposed to do it
@sammendoza95352 жыл бұрын
how much did you charge for this job? I need the same work on my car .
@FreedomLover1705 жыл бұрын
Amazing work you are the man!
@luisfontanez17704 ай бұрын
How much for a job like this? Wow!!
@DanTheManIOM4 жыл бұрын
I wonder what a job like this would cost at a collision shop ? ka ching
@polymexdf693 жыл бұрын
What’s a weld trough primer
@arsalanalqaysi53962 ай бұрын
Hi nice cab reach you pleas abd thanks 😊
@NsskMedia3 жыл бұрын
I wonder how much is the Labor cost
@BrucePierson5 жыл бұрын
Great job, as always. The super-high-speed footage was a really good idea, as it lets us see all the work in a short time.
@eis-zj4qq3 жыл бұрын
How much does this cost to replace a quarter panel?
@alexbereg50045 жыл бұрын
Great job! Golden hands!
@anthonyaranda5075 жыл бұрын
I like to see more of you doing customers work and making extra money
@bikerboy2k1423 жыл бұрын
Just curious as to what a job like this would cost all said and done?
@bigmacsnoobselectronicsrep80325 жыл бұрын
Fantastic video nick as always mate
@Iegend174 жыл бұрын
Cuz you went to the opposite direction bro. Glad you are ok
@mhadvertising34913 жыл бұрын
Is this considered a frame damage?
@jaimeramirez-zt9dd Жыл бұрын
How much did you charge to do this job
@protectedd2 жыл бұрын
Bro where are u I need u
@friendlyguy25423 жыл бұрын
Really good video. You did a good job explaining things. When you say job took three days, does that mean 8 x 3 = 24 hours? I have a 2007 Corolla that has exact same damage and insurance says 60 hours labor for entire job including paint. Sounds like a lot of hours.
@aaron.black1074 жыл бұрын
Seam sealer... use a bit of scotchbrite to achieve an oem look - just wipe over and gives a beautiful factory brush effect
@jeepcuz4203 жыл бұрын
How much is a job like this?
@Badhabbitgaming5 жыл бұрын
Another cracking vid nick, defo like to see more but ultimately down to you, should really post my customer vids up but make a new channel just for that not on this gaming one of mine ✌😎
@jimmyfields9469 ай бұрын
Do you do impala 2019
@gilbertfranklin15374 жыл бұрын
Nick, you really do good work - but there is one mistake you are making that keeps you from getting to the 100K subscribers that you deserve. After 8 years putting out good videos, you should have learned to reply to comments. At least a few, especially if they are subs... 😉
@franshans96245 жыл бұрын
Hey Nick. From a safety point of vieuw I give you the advise to look for a safety grinder with a brake. Look at www.metabo.com and look for a small grinder like the WB11-125Quick. This machine has a mechanical disc brake wich stops the tool under two seconds! And offcourse allways use the second handle😁
@johnphilipburdis37985 жыл бұрын
Great job,Nick. I would like to more customer builds,but personal builds are great because you show us how things are done your vehicles. Can you do a Jeep grand cherokee V8 at some??😁🇭🇲🦘🍕😃
@tonyz20112 жыл бұрын
How much did it cost the customer?
@romuhamsteri5 жыл бұрын
Hello Nick. Definitely more customers cars! If it is possible and it doesnt interfere with your main thing. But do not listen to us too much, you have to do your job in the way that is easiest for you. But anyway, i love your videos and the way you make them :) In Finland 09.10.2019, at 2:15 p.m
@RichardHeadGaming3 жыл бұрын
So you would leave the wheel well with less structural integrity by cutting and a few spot welds so it looks factory and quicker to do.....screw the customer and whats a good repair. And you can make your panel adhesive and seam sealer look factory you just must be lazy, it would have taken you another 30 mins tops to use a hammer and dolly on the old fender well or another 40-hour to change it.
@robertcampbell5605 Жыл бұрын
the fuck do you care? not your customer not your job.
@RichardHeadGaming Жыл бұрын
@@robertcampbell5605 Comment was about pride in work, not if the car was my customers or not. Do the job right or don't do it. It's also about letting these other people praising this hack letting them know he did not do a good job in the least.
@robertcampbell5605 Жыл бұрын
@@RichardHeadGaming that wasn't an insurance job. It was a used quarter panel on a regular customer pay job. It will be just fine
@DinyoBonev5 жыл бұрын
Awesome job Nick you are a big specialist in your job...I loved to watch your videos! Greetings from Bulgaria we don’t have a specialist like you , you are making something like magic on this cars ;) !
@marks37853 жыл бұрын
Do you use a mig or tig welder
@scottblackwell57894 жыл бұрын
3 days labor equals how much pay for fixing that car back to perfection?
@mirmu82324 жыл бұрын
dude i would never get my car repaired by you sorry man i dont like what you have done around the wheel
@robertcampbell5605 Жыл бұрын
it was actually a pretty slick way to install a used quarter panel. that little inner wheelhouse piece isn't structural. you can fold that piece in half with your hands
@alexandrealmeida29325 ай бұрын
Bom trabalho de reparo.
@gilbertbonsu833611 ай бұрын
Where are you located man. I need the same job on mine. Plus i have the part
@gilbertbonsu833611 ай бұрын
PLEASE LET ME KNOW
@JW-ix1uy8 ай бұрын
Great job.
@juliocuevas2904 Жыл бұрын
👍
@lamarlenhardt47662 жыл бұрын
Damn good job 💯
@gabifilip99762 жыл бұрын
👍✌️
@CharlyGee02543 жыл бұрын
👍
@frankwhite31485 жыл бұрын
All I got to say is get that money ...it doesn't matter what you do.....its a Blessing to see you work Playboy.....Your the man....keep it tight.
@splash59745 жыл бұрын
Looks good! Windering why you didnt straighten or replace the trunk drop off? Looked to bit a bit wonky... Other than that, turned out good.
@ryanmacewen5112 жыл бұрын
Awesome video. Great idea to help expose spot welds by wire wheeling. Thanks for the video.
@patrickmorrissey22715 жыл бұрын
Nice job on this one.... Seems like a lot of other people struggle with getting that door to close, when you replace that panel.... You made it look so easy! Haha! I don't mind seeing customer work. Still very interesting, to see your process on these....
@vermasean4 жыл бұрын
Just found this channel! It’s a beautiful thing bringing these machines back to life. Liked & Subscribed 👍📺🛠⚒
@2Moza5 жыл бұрын
Mate Money in is more important than Money going Out lol . Great Flip car for the repair and the customer will be happy as well. :)
@tonymtz14 жыл бұрын
Hi Nick, what drill bits do you use for removing spot welds?
@kmjhsaikat5 жыл бұрын
Customer works brings change for viewers and some extra $ for u. So we'll like to see surely
@yeahgarcia1049 Жыл бұрын
Bro cnto cobras
@USAF-7775 жыл бұрын
Hello Nick, would love to see you add customer work videos to your channel also and great job on the Altima.
@combatmedic33475 жыл бұрын
Nice job! If the customer asks how you fixed it, just show 'em the video.
@johnfeeney77825 жыл бұрын
Hi Nick great video good tip on the arch part looks better and abit quicker to do this way. Yes more customer work a door skin I would be interested to see
@ohioyodertoter68275 жыл бұрын
man todays vehicles are such cheap made gatbage it's a shame we have to depend on them on a daily basis due to the cost of fuel :-/
@richard31415926385 жыл бұрын
and you used the filter on the camera during the welding. Nice...
@dennisbeierjensen51725 жыл бұрын
Customer cars or your own cars. It doesn't really matter. 👍🏻
@davidchaisson36105 жыл бұрын
Great job on the customer build car. Keep up the awesome work that you do.
@loh3n7855 жыл бұрын
awesome work !! I am really impressed by what you do, the king of the quarter panel ;)
@paulmullins44395 жыл бұрын
Great video enjoyed watching keep up the great work
@eddiehannah54895 жыл бұрын
Another great job¡! You got skills nick!
@alistairewen57925 жыл бұрын
Nick you make it look easy...keep the videos coming.
@XynGG4 жыл бұрын
What drill bit do you use?
@jamessawyer46255 жыл бұрын
it is nice to see how you do other than your work. Great job.
@ToolMan1285 жыл бұрын
Nice work. You can sowe more customers work.
@robtledgard80685 жыл бұрын
Yeah i would like to see more content for your vids nick!!
@howardrice95275 жыл бұрын
Very nice Nick!!!!!!!!!!!!!!!!!!!!!!!
@doncoiner81285 жыл бұрын
Nice job. The seam sealer looks like Factory to me.
@CH-dc9iy5 жыл бұрын
Hey take more customers in
@JafarAli-he4jv5 жыл бұрын
Great work and works safely....
@Iegend174 жыл бұрын
Wondering how much does it cost to replace the quarter panel
@RebuildWithNick4 жыл бұрын
Depending on the damage but usually 800-1000
@Iegend174 жыл бұрын
Rebuild With Nick thank you very much!!
@tonypuskadjia8685 жыл бұрын
Nice job Nick 😁👌🏻👌🏻
@pauljaney215 жыл бұрын
I like to see as many of your videos as I can
@jeffreythomas42835 жыл бұрын
Wheel arch cut was factory, great idea !
@joanwilliams32214 жыл бұрын
Good job love to see more customers jobs 👍
@poptop76375 жыл бұрын
Leaving that part of the donor wheelwell is an excellent idea. I would definitely use that technique. Thanks for sharing!