replacing audio cables on a technics 1210 mk2 part 1

this is a video showing you how to change the audio cables on a technics 1200 or a 1210 as they are both the same just 1210s are black and 1200 are silver.
i have disabled coment and rating on part one if you want to leave coments or rate please do in on part 2 thank you.
INFO: depending on the wattage of your soldering iron depends on how long you will have to hold the tip on the conection before the solder melts, for exsample a 10 to 20 watt soldering iron will take longer than say a 25 to 40 watt soldering iron.
it doesent really matter weather you use lead or lead free solder but bear in mind that lead free has a higher tin content than leaded solder and contains more flux so its harder to melt also leaded solder is soter but lead free solder is more brittle than lede solder.
WARNIGS: make shure you unplug the turntable before unscrewing or opening.
be careful not to breake any of the thin wires from the tone arm as they are a very delicate.
Never turn the turntable upside down without any type of cushion under underneath it you could damage the tone arm, and be careful if youre using the turntable dust cover to support the turntable whilst its upside down the plastic they are made from is very brittle.