Replacing Hydraulic Cylinder Seals - Part 2 - Removing a stuck gland

[@SeidelRanch]

If you don't like long winded and detailed videos, then just move along. Here are all the videos: Replacing Hydraulic Cylinder Seals - Part 1 - Preparing to tear down the cylinder: kzbin.info/www/bejne/qJKTlH-Zar2rla8 Replacing Hydraulic Cylinder Seals - Part 2 - Removing a stuck gland: kzbin.info/www/bejne/rorWh3Sdbd17qq8 Replacing Hydraulic Cylinder Seals - Part 3 - Pulling it all apart: kzbin.info/www/bejne/a2aUZn6AbKeYaZI Replacing Hydraulic Cylinder Seals - Part 4 - What did I do wrong?: kzbin.info/www/bejne/p5aQfqKqd5t5h6M Replacing Hydraulic Cylinder Seals - Part 5 - Putting it all together: kzbin.info/www/bejne/lZ7RhpmkoM9pg68

[@kotchz455]

You know I actually watched the entire thing. Actually enjoyed listening to you talk. I have a screw on one which I can't get off. Maybe watching your video took my mind off of my problem. There is a lot of rust bridging the gland and cylinder . No joy yet.

[@SeidelRanch]

Did the ping method not work?

[@kotchz455]

To be honest I'm not comfortable banging dents into the threads. I can't remember if yours had a spring inside. Mine doesn't. It has 2" wrench flats on the gland of which I have a crows foot wrench for. I don't know why I can't break it loose. What does the ball peening actually do?

[@kotchz455]

I just viewed the beginning of part 3 and realilized that your gland is not threaded. From a diagram I know that mine is!

[@rodhawkins5037]

You are the man👍your trick worked flawless. I was about ready to take the cylinder to a repair shop.

[@SeidelRanch]

Glad it worked. I understand the frustration.

[@pjbrowne1573]

I’m going to give this a try. I had a terrible day today trying to get my New Holland cylinder gland off with no joy!

[@SeidelRanch]

I get it, I talk too much and repeat myself. My wife says I am too detailed and need to get to the point. I will work on that. ( And sorry about the sniffles in this video. I try to edit them out usually but I guess I forgot to in this one. @#$@% allergies. )

[@HelloWorld-ql3ki]

You really really really need to listen to your wife. Since you did not, I stopped watching your videos. Made me mad.

[@TheBlairHouseProject]

@@HelloWorld-ql3ki It is long winded, but that's what fast forward is for. Thanks for posting @seidelranch !

[@jakefromstate9368]

Hell it worked, it’s hard to believe something that simple works. Did not even need a pipe wrench for most of them.

[@SeidelRanch]

It sure does. It was the magic trick for this gland.

[@mongomay1]

Try a medium sized air hammer if you have access to air. Get the accessory bit set.

[@SeidelRanch]

I do have an air compressor. I need to get one of those and try that. Thanks.

[@torbjornmarkusson6677]

Holy crap it workes! Thanx a bunch!🎉🎉🎉

[@SeidelRanch]

Glad it helped!

[@bryanhbailey]

Thx for this. Your wife is right, like most wives are. Please condense next time.

[@SeidelRanch]

Thank you. I hoped it helped. I have been cutting out as much as I can of the chatter I video now. It's crazy though, even when I know I am talking too much and I cut back; when I review the video there is so much more I end up cutting out. Apparently I just really talk too much. Anyway, Have a great day.

[@HelloWorld-ql3ki]

He never does take off the gland and rebuild it.

[@SeidelRanch]

I do actually. There are 5 video parts that cover the whole process.

[@HelloWorld-ql3ki]

@@SeidelRanch I was talking about this video and the couple before it. At this point, I gave up watching. You did eventually rebuild the gland but you never showed the detailed process that everybody needs to see before attempting to do it themselves.

[@TheBlairHouseProject]

That is a pretty good point.. Showing the actual peening would be useful. Perhaps consider a body cam and put it on time lapse for the stuff that takes a long time. 🙂Thanks again Seidel!

[@mathewsmith5214]

That video was way to long for what it was

[@SeidelRanch]

Just easing the tension...

[@donaldoldaker7258]

I BROKE THE END OFF THE GLAND.IM HAVIN ONE HELL OF A TIME

[@SeidelRanch]

Man, that really sucks. Are you going to weld something to the gland to try and get it out?

[@donaldoldaker7258]

No I'm drilling some of the wire retainer out and used a ground down nail and drove it out..I had a gland made.130 bucks

[@FlakeyPM]

Waffle waffle waffle and you still didn't get it off.

[@SeidelRanch]

I prefer pancakes.

[@waldemarszulczyk5678]

Yap talking to much, fired .5h talking done nothing

[@SeidelRanch]

Thanks boss. I promise to do better next time.

[@zardiw]

What a waste.........Z

[@SeidelRanch]

Yeah, I talk way too much in that video; but the peening method is pretty awesome no less.

[@treborterb]

@@SeidelRanch I have to disagree...thought you put just enough detail and explanation but showing it actually being done woulda been a little better