Replacing my Glock 19 after a decade? (P365 X-Macro TACOPS)

[@TheArmorersFix]

Dude, I’m with you. I never even saw this gun coming but was stoked when it dropped. Especially with the Tac Ops. Been carrying for about 6 months. I’ve even carried it on jobs. I was considering an aftermarket slide to get around the comp of the original macro. 17 rounds! Absolutely fantastic. Got about 800 rounds through mine with one failure, which was probably the tension in the new mags. That’s what I was on the range sorting out in the first place. Sig knocked this one out of the park. Thank you for your thoughts on this one. I always respect your thoughts and opinions. 🙏🏻

[@QUEST_4_FREEDOM]

Do you have an optic on yours? I just saw a review that said the rear sights will NOT come off. Which takes out a good amount of options for optics. Thanks

[@TheArmorersFix]

@@QUEST_4_FREEDOM rear sight should def come off by traditional drifting. The rear sight channel is cut separate from the optic channel. To add a different optic outside of their spec is going to require custom milling. I’m running the Holosun EPS currently.

[@QUEST_4_FREEDOM]

Thank you for your response. I'm the first to admit, I'm new to optics and Optic cuts and all of that. I read that in a review. It may be on Palmetto State Armory website I believe. I was about to get a Holosun HE407K-GR X2 6 Red Dot Reflex Sight 1x and then I saw that review and now I don't know what to do

[@QUEST_4_FREEDOM]

It is weird too because I have youtubed and searched for Tacops p365 macro with Optics and I don't know if it's my head or what but it seemed like those had less optics on them than the other options for p365's

[@QUEST_4_FREEDOM]

​@@TheArmorersFixhis exact words are "Optic cut does NOT remove rear sight. Hope this helps". Am I misinterpreting what he's saying?

[@thatoddfella]

Armory Craft Ultimate Trigger Spring Kit. It's only $20 and cleans the creep and mush out of the trigger, makes it feel slightly lighter and has 100% reliability from my testing and their claims. It does take a little work to install because you have to disassemble a good bit of your FCU and striker. Wasn't too difficult with limited tools.

[@GuardianCraft1]

I’ve slowly converted my XL into a Tacops, and have fallen in love with the gun I used to just like.

[@valencia8324]

Same here. I don’t use my 19x after that

[@seijiroukikuoka5975]

P365XL owner here. It gets better with use.

[@GOD1sCrea8tor.]

me too, i enjoy it with extended clip for the extra pinky space. my everyday carry.

[@SUNDAYHRS]

Awesome review! I am 6'9" and also currently carry a Glock 19 Gen 5 MOS. I really want to get The X-Macro TACOPS. I'm pleased to hear the positive review coming from a big guy like myself!

[@petesheppard1709]

Nice details! I'm really stoked about the smallest P365, since I pocket carry and find the small grip quite comfortable. With a 17rd mag for the reload, and I'm a happy CCW! For those interested, adding a thumb safety is dead easy; it will pop right into the circular cutout at the back of the trigger module. The hardest part will be cutting a safety slot in the grip module, if a notched grip is not available to fit the owner's preference

[@BrokePhilanthropist]

First firearm I bought was the sig 1911 TTT. NEVER had an issue or malfunction. This was an extremely informative video. I’ll be purchasing the p-365 next.

[@tax905972]

Sig is solidly reliable.

[@12_nine9]

QVO tactical sells screws that direct mount the EPS to the slide without a plate. Just an FYI.

[@JAY813ALEX]

Had a catastrophic failure with a p320 and p365 using no factory ammo. Just replaced the grip module and the slide stop in the p320 and kept on rocking, Replaced the Grip module on the p365 and kept rocking. If that happens to a Glock you would have to pretty much replace the gun (serialized receiver)

[@johns6431]

Glocks don’t have catastrophic failures 😂

[@InferiorRifles]

@@johns6431any gun can have a catastrophic failure. Especially when shooting reloads, like mentioned in the original comment.

[@lorenjohnson3538]

@@johns6431your not very smart are you. Just google Glock catastrophic failures you’ll find a whole shit ton. Ammo generally causes catastrophic failures, not the gun

[@user-do1fq8oy9c]

After 33 years carrying Glock. I finally retired my G48 for a Tac Ops. So far so good!

[@RdLam1001]

I carry one in the chamber. definitely hard to rack the slide with a full mag. Hoping it would just break in. Love the tacops with a longer barrel vs the macro comp.

[@365xmacronocomp]

It will break in mine did the same thing but it gets easier

[@ghilliemanreviews]

I have the normal XMacro, not comp or not Tacops. Came with a manual safety which I opted for. It is amazing! Wish the comp came with a safety but it didn’t unfortunately. I could always change mine to be that way though but I love how the longer barrel in my normal one shoots!

[@vitogrimes6006]

Regular X Macro is the way.

[@ghilliemanreviews]

@@vitogrimes6006 it is amazing I’ll tell you that! I love it

[@formerpilgrim4934]

I added a manual safety (takes 5 minues) , upgraded to the Wilson grip module while at it. If you want to beat guys with full size guns at classes or competition, this is the set up.

[@tax905972]

Your finger is the safety

[@ghilliemanreviews]

@@tax905972 duh. I still want more than one safety

[@miketaylorID1]

the 365 defies physics shoots so much ‘bigger’ than it is. trigger is meh, but that’s no reason to not carry a pistol. good stuff

[@365xmacronocomp]

I have the p365 XL and the p365 X macro non-comp like this gun absolutely love both guns but the macro was printing more than XL so I was carrying that but then I recently found the Pegasus by DeSantis slim-tuk holster for the macro it is the best holster that I have found it holds the gun so much closer to my body and don't print at all so I've been carrying my macro again lately but absolutely love both guns I have 1700 rounds through my Excel and 1950 through my macro no issues and I have shot the cheapest ammo that I could get through both of them they've been flawless

[@fredvStein]

I've heard a lot of positive things from people recommending the PHLster carry system for AIWB. It allows for a very close to the body mounting system. There are several holster options that work with it : PHLster has their own, Henry Holsters, KSG armory. If you're on the fence about the Xmacro because of printing, check them out.

[@TheWilliam1122]

Yeah I bought the xmacro comp version because that was available at the time of purchase. I like it, but it was 150 more which is crazy. If you can get the regular xmacro do it. Longer barrel, same length slide and two mags speed loader. For $649.00 vs $800.00 Tacops you get a mag flare and 2 more mags for 750.00 it’s a little better buy.

[@jhl4451]

IMO, Tacops is definitely the best value of the 3 due to the 2 extra mags ($54/ea. MSRP), flared mag well, and extended slide release - I also prefer the 3.7" barrel over the comp version.

[@MrPerry61]

Also Wilson combat has made a grip module that fits the 17rnd mags. comes in 4 colors.

[@spencemiller5836]

I carry the OG 365 with a 17 round magazine...with 1 in the chamber...I love it

[@DanielDraper-ki4hr]

Been a Glock fan for years, and the G19 was my carry gun of choice. The P365X kicked it out of my rotation, bought a Macro and it's even better. Now my G19 is my house and truck gun.

[@henryschmidt636]

Sig mags marked made in USA are made by Checkmate. I just got mine and they were no longer available with suppressor height sights.

[@Duwils]

I saw the P365 X-Macro and was impressed with the size and capacity, but not a fan of the "comp". I love my X-Compact P320, but when I saw a video of a build I thought 🤔, "If only they made this no "comp" version direct from the factory". Then I realized my prayers were answered before they were even sent. No "comp" a longer barrel, extended controls, and an easier conceal than my P320 with the WC Carry 2 grip. This will be my EDC for the foreseeable future. The EPS Carry with the direct mount screws feels like a cheat code. Now to follow up on the recommended Armory Craft P365 Ultimate Master Spring Tuning Kit.

[@joesmith-j7r]

Here's my 2 cents. The Tacops is in my carry rotation. (G19/Gen5, Sig TacOps, SIg P365XL Spectre) The TacOps (stock w/Holosun EPS Carry direct mount) was disappointing as far as Trigger, its OK. Other than that Its a great shooting easy to point pistol. I added Hogue finger groove grips, makes it more secure in my hands. It did widen the grip a bit. 4 17 round magazine, how can you not love. 10/20 yards the gun shoots so good with EPS, its almost cheating. 800 rounds no issues, using CYA kydex IWB. Will co witness wth EPS Carry without needing plate. I did have to change stock screws. I had some laying around. Over 700 rounds , still holds Zero. For me this would be the G19 killer if it had better trigger. Glock 19 Gen5- Purchased with RMR, Timney Trigger, Trititum Suppresor sights,. This gun shoot like a dream, the trigger needs getting used to. First time shooting , double tapped by accident. So smooth, makes you shoot so much better and accurate. Once you get used to it, 10-25 yards no problem with RMR. To me more accurate than the TacOps. Using CYA IWB kydex. This is my EDC first choice for accuracy and dependability. (over 1000K rounds not a single issue) . Im 5' 10" 195 lbs, muscular build, carry IWB, I find the TacOps carry alot more comfortably than the G19. Thats why i carry this as my second choice. Third choice Sig p365XL Spectre(not comp version) . Holosun 507K X2, standar sig tritium sights, (co witness perfectly with 507K, no plate needed) . Comes with12rd mag, I carry with 15rd mag, sticks out a little bit but not noticable. The trigger is a little better than the TacOps. I added Hogue finger groove, much better handle on the pistol, doesnt really add to the girth of pistol. Shoot very good, no problem hitting 10-20 yards. Once red dot is dialed in (zeroed) it is a fun fun little gun to shoot. Over 500 rounds , no issue, holds zero. Very small almost toylike. I am using an older leather IWB i used for my Colt Defender. Third on my rotation, when I am going to be out long or driving far. Very comfy to carry, I don't hesitte to carry. I also have P320 Xcarry Spectre RXP, I purchased for carry. I found it too cumbersome, now it just sits in safe. These 3 I carry without hesitation. I purchased several handguns thinking I would carry them, I realized that they were just too big to carry for me. Even though they are considered carry guns. No regret getitng these becasue one can never have too many guns around the house. Walther PDP, Walther PPQ, HK USP 45, USP Compact, Sig P226 Legion RXP, SIg P229 Legion, HK VP9, HK VP9L, SIg P320 Nitron, Sig P320XCarry Spectre. I am waiting to get Sig P365 AXG Legion added to my carry rotation. Sidenote. I also have a 4th on the rotation, I didnt count because it's a revolver. S&W Performance Center Model 19 Comp 2.5. I only carry this with hot defensive 38 specials. The 357 defense rounds are too much for me, I can't get a quick second/third shot off like the Automatics. This is such a beautiful revolver. Carry IWB leather holster. Yes I know 357 takes time to get used to. I say, no thanks, if I want to shoot 357 hot loads, I bring out Ruger GP100/S&W 686 +. That is fun shooting 357

[@kellz8854]

Was looking at one of these and a g45 about 3 months when deciding on a new ccw. It was a hard decision but i went with the g45 due to it being about $80 less and having a better finish for southern weather.

[@johns6431]

Just bought a 45 MOS it’s perfect

[@davidwilson5581]

I have a 19X and would consider myself more of a Sig guy. The 19X is by far the best gun I have and I shoot it better than any of my Sigs. I like the 19X so much I think I need a G45.

[@Nirmk]

cant blame u alot of guys who been shooting the tacops been slowly switching back to the 19 or g45 considering finish and the gun malfunctioning after so many rounds the control unit wears out after so many rounds run through them big issue with the p320 also and the finish on mine is just sub par even the the gun is thinner i cant really tell the difference in carrying my 19 or the tac ops still prints the same but i do know my glock is alot more accurate of a gun and is 3 years old and my tacops is 5 months old and looks like its been through some shit and i only have 300 rounds through it compared to my glock having over 1500 and still looks new

[@chevykent77]

​@@davidwilson5581😂

[@RepentorPerish77]

I purchased one of these with the Sig Optic for $669 shipped. I think I someone made a mistake so I snatched it QUICKLY

[@mattz.7761]

Racking gets better with time. Got to get in and clean and lube it. Especially clean the magazines. Some of them come in from factory very gritty and dirty. Have the compensated macro and performs well.

[@PointWithin]

I have a stock p365 and just ordered this. Gonna swap the slide and fcu into that smaller frame for when I wanna carry that. Will also get EPS carry MRS green as well so I’ll had an optic to use

[@PREPPERINES]

Can you do a one year review sir?

[@great_deception]

The P320 XCompact was already a G19 killer, when the P365 XMacro out, it just became embarrassing, it's hands down probably the best 9mm hi-cap carry pistol on the market today.

[@MercyBlack137]

I’m with u on p365 but you hurt your credibility by saying the super thick p320 is a glock 19 killer

[@great_deception]

@@MercyBlack137 Dude don’t beat the dead horse again. Look up how many silent recalls and upgrades Glock had throughout the 90s including slamfire incidents. Don’t have a double standard.

[@davecaseyjr.7657]

I have done the same but not the tac ops because of the extra heat the comp and ported barrel will give off and have not got completely comfortable with the Sig yet

[@a.d.c7941]

The tacops is the truth. It is my edc. Awesome shooting gun. It shoots like it’s a full size gun. I love it.

[@woliver79]

Why did you put an optics plate? I don’t use one for mine. It mounts directly to the slide without a plate

[@MrSmith-zy2bp]

I rented a p365 at a local range. I was shocked at how the recoil wasn't bad and obnoxious. My G19X has more of an obnoxious recoil than the p365. I definitely would want p365x for longer grip, macro maybe even better.

[@4sumcrazyshit]

Who is more accurate and smooth trigger?

[@todoubled7970]

Great decision…and no, I’m not a typical Sig guy that defends it no matter what. Truth is, I own the Sig P365 Xmacro and would choose it over Glock every time. I do love my Glock 45 (9mm) but it doesn’t match up with the Sig.

[@HowardMorgan-n3r]

Any issues with rust that's been talked about?

[@InferiorRifles]

None with mine

[@great_deception]

1 guy made a video about this on youtube and suddenly everyone is talking about P365s rusting. I have 2 of them for years, no rust. It's embarrassing how many people use youTube as their source on firearms.

[@Dorito230]

Of course there are no issues. I doubt there ever was.

[@vitogrimes6006]

Tacops is fine, I’d rather have the non comp, non Tacops version. I don’t like the magwell. If for some reason I need to strip/pry out the magazine it’s more difficult to do so due to sinking deeper into the grip. The regular X Macro allows the bottom of the magazine to stick out for easy access.

[@rayjensen4480]

Do you like this gun better or a Glock 19 to carry regularly?

[@harvey947]

Sig must be a real treat to someone with all the heated comments I have seen on there gun reviews..I believe it’s time to buy one!

[@MrPerry61]

Have you tried the Glock 45 9mm? I have one with the holosun SCS MOS optic on it. once I upgraded the trigger it's a nice shooting pistol. I just picked up one of these X Macros yesterday.

[@charitybull]

I love the platform and just ordered the P365 AXG legion because I love heavier guns.

[@TheFishingfool25]

Nice review. Thanks for the sight recommendation. I currently have the Sig suppressor height sights with the Holosun 507k and it takes up too much of the window. I also have the Mcarbo trigger installed, it takes up alot of pretravel check them out. It was not too much of a pain to install.

[@jerrygolden832]

Just add an adapter plate and you'll have the cowitness you want. Also, fully load the mags and set aside for a couple weeks before using . I've had 5 including 10, 12, and 15 rounds, (no Macro yet) and subsequent loadings became easier. The WC modules are great. My only complaint ever with P365's was grip didn't feel right but the WC's are great. I have one on a 320 RX and big improvement. Added the WC tungsten grip weights as well.

[@brianphelps6661]

Sigs are single action striker fired. Is this why the 320’s are going off?

[@Dorito230]

They AREN’T. A few did-in the beginning-but they haven’t since then, which was many years ago.

[@randolphtodacheene1133]

One thing I don’t like about the 365 is the trigger gets extremely hot after couple hundred rounds at range.

[@4sumcrazyshit]

​@@tommyyuckguts5276how many thousands of rounds have fired with your Sig 365x?

[@great_deception]

Give us a self-defense situation where you will need to immediately rapid-fire hundreds of rounds through a pistol. It's not an IPSC gun, its a carry/home defense gun.

[@cwolf8841]

Everybody is different. I find red dots useless and donated mine to Ukraine. I put Speed Sights on all guns. I am exploring BarSto ported barrels. Cheers

[@ynotjf]

The Sig P320C Romeo was my Glock 19 killer after 7 years of EDC. The Sig P365XL Romeo was my P320 killer.. Been carrying the P365XL Romeo Zero for 3 years and don’t see changing anytime soon..

[@Rubeless]

You don’t shoot much

[@ynotjf]

@@Rubeless - about 1,000 rnds per year. Had 11k on my G19, 7k on the P320, 2k on the 365. Compete in IDPA & Steel.. how about you?

[@DS..69]

​@@ynotjfSave up mehn. It'll be ok.😅

[@seanharrington4768]

Question: I’m confused with Sig : P365 / P365XL / P365 X-Macro / P365 Tacop I’ve been looking at the X Macro ported version. How is the Tacops different - ?!

[@InferiorRifles]

@@seanharrington4768 TacOps doesn’t have ports, comes with a magwell extension, and comes with 4 magazines instead of 2.

[@ox_boogie]

im 6' 1 and i thought i was going crazy watching you handle this gun. i had to pull my macro out of the box just to compare

[@marcOnline]

What is the sku of the sights you ordered?

[@scott12895]

I have pretty much the same setup with different sights, and I don't use the plate with the optic. had mine for 6 months now and I really like it myself. I've had 2 rounds fail to extract with it and shot about 500 rounds through it. anyone have or hear of any extractor problems?

[@BanditApache-nd6lu]

I own many, many. Glock set the standards and will always be king.

[@tranquilmind8487]

no trigger or manual safety?

[@InferiorRifles]

P365s are available with or without a manual safety

[@Daddyoftam]

im brand new to pistols and the world of hand guns. whats your opinion on this 365 tac ops for a first time owner? no shooting experience.

[@TroyHomenchuk]

Is it actually cut for the EPS Carry though? It looks like there is a plate in there.

[@InferiorRifles]

The plate comes with the EPS carry. You can direct mount it without the plate if you get shorter screws

[@bbmw9029]

Nice review. You should post a range review. One question. Have you tried shooting the gun with a round in the chamber and a full mag (17+1)? With the gun cycle a completely full mag?

[@Rubeless]

Why would it not

[@bbmw9029]

@@Rubeless The author was talking about how hard it was to rack the slide on a full mag, indicating a lot of slide drag from the fully compressed mag spring. That slide drag could retard slide cycling from the first round.

[@BinaryPun]

I have a P365xl and this is extremely difficult to do with the 12 round mags. I opted in for a magguts +2 conversion and keep one less in the mag if I’m not chambered.

[@Jackson-xr5dg]

Can you drop a link to the 1/3 sights you got? I have the same set up but I’m hesitant to buy any

[@InferiorRifles]

www.nightfision.com/product/night-fision-optics-ready-stealth-series-for-sig-sauer .289-.287 Height for lower 1/3 cowitness

[@ryanchinh1040]

How many magazines does it come with the case inside?

[@distilledfreedom1840]

I've been carrying my 3rd gen G19 w a 17 mag forever. Thinking of switching. Heard they had some safety issues? Going off in a holster and whatnot. All that worked out?

[@kevinborish]

That was the p320 not the 365. Only issue 365 had was the striker getting brittle and breaking but that was the very first batch of 365’s before the xl, macro, macro comp or tacops existed and it’s been solved.

[@distilledfreedom1840]

Thanks, I went to take a look at the Macro and boy does it feel so much better then the 19. As far as carry goes. @@kevinborish

[@davidjoseavilagravedeperal9115]

Where can I buy this gun with this eps carry included and how much does it cost?

[@InferiorRifles]

Sig does not currently sell the X Macro with the EPS carry included.

[@Mike-ox1bu]

Hey Man, great review as usual. Any word on Wilson Combat Grip Module or potential 365 X-Macro Tacops evolution like Equinox, Classic, Scorpion, AXG Grip or Legion? Thank you........

[@wildwolf8983]

What holster do you use for this gun? OWB or IWB? Any recommendations?

[@InferiorRifles]

I have both IWB and OWB for different outfits. For IWB I personally like crossbreed or similar style “hybrid” holsters. My OWB is made locally by AAA Concealment. That’s just my personal preference though, it’s important to try out different kinds to find what works for your needs and build.

[@trackhawkleo707]

Awesome video. Thank you!

[@MattMacKo]

It says it's a 1.4in width...is that just because of the flared magwell?

[@InferiorRifles]

Yes. 1.1 inches without the magwell

[@papajim1974]

I can't decide between 365xl or X?.. What's the barrel length on this one above your showing? Pls tell me how the barrel length 3.1" makes the difference vs. 3.7" ?

[@joellarrysr9977]

I went to buy the XL and my hand was still too big. With the 17 round mag this fit better.

[@americanpie8059]

Can we talk about the fly on the wall so to speak? He was sure checking out that gun in the end of the video. :)

[@stewmeat30]

Question is will the WC grips accept the stock mag flare?

[@filoniz]

What is tacops?

[@charles17508]

Seeing how you have to count on the pistol for defense of life feel the machanics of the 19 and that sig when tbe trigger breaks on a sig its dol and weird sounding the glock crisp and its just a better gun the springs are bigger and parts dont have to be micro size .i aint rushing to bye a 800 dollar peice .

[@BigTimberLodge]

I have the same pistol and it is replacing my 43X.

[@fredvStein]

Which size sights did you order for lower 1/3? 289-287 or 240-238?

[@InferiorRifles]

289-287

[@fredvStein]

@@InferiorRifles Thanks! I like these H3 irons even more than Ameriglow or Trijicon. I would love if you can do a quick video showing how they look infront of and through your optic.

[@randyiglesias1]

I like my sig x macro. Carries just a tad better than my g19 but honestly, they both don't carry as well as some other options. Also I definitely don't think it's a glock killer. After doing a cheap trigger job on my g19, the g19's trigger blows my macros trigger away. The comp on the sig just made it recoil like a stock g19, and after i installed a comp on my g19, there is no comparison. The compensated g19 shoots way better than my macro. Especially with the trigger job.

[@tiburonrojo1975]

I been carrying the P365X , but the X-Macro fits my hands perfectly so I ended up getting the Macro.

[@GregWilloughby-v6f]

What do you mark your red dot screws with?

[@InferiorRifles]

Sharpie paint pen

[@JaredGrissett]

Just had a conversation with sig CS earlier today about my brand new p365 that came with 2 Mags that wont reliably function. They said i need to break in the gun/mags with 200-300 rounds to expect any reliability. What are your thoughts on that? I've never had a pistol mag issue outside of 1911s.

[@InferiorRifles]

I haven’t had that experience with my mags personally, but that seems excessive. If all of your mags are having issues then one would think that the pistol itself is the problem, not the mags

[@seijiroukikuoka5975]

Disassemble the magazine, diss the spring a couple times, then do some dry cycling. If it happens again, tell the CS people, it's f@#&ed.

[@TheArmorersFix]

@@seijiroukikuoka5975agreed! That’s the very issue I’ve seen from some of these tiny mags with excellent round counts smashed into them.

[@TheArmorersFix]

You can also completely load and unload those new mags 5 times. This has solved that each time I’ve seen. From 365 mags to shield, and even the new beretta 80x cheetah. You should be right back in business!

[@JaredGrissett]

@InferiorRifles it's the mags for sure. The followers are getting stuck. if I eject the mag and tap it to dislodge the follower, it shoots up and gets stuck half way out the top. I'm going to load and unload the mags a bunch of times like the other guy said here to see if that fixes it. Either way, it's wild to me that a modern handgun would have an issue like this and that the companies stance is to "break in" the magazines.

[@Jesco-pi9gr]

Is the slide the same length as the xl??

[@nicholasdegliomini9969]

Yes

[@1olddirtroad]

SIG has the promotional till the end of the year that you get 3 extra 17 round magazines with proof of purchase

[@joellarrysr9977]

I just bought this as my first gun. Getting my laser sight installed today

[@pilotmaf7007]

Been seeing several reports of rust due to poor finish. Anyone having the same issues?

[@alexhuf76]

My friends has rust but he also never cleans it. So I think that’s the issue

[@filoniz]

icarus grip?

[@ron8566]

Not sure why anyone would carry without a round in the chamber.

[@InferiorRifles]

I’m not condoning or recommending it. But people do it, so I felt it was worth mentioning.

[@jadenantal1652]

Better than not carrying at all

[@dylanjackson6685]

Very cool. Never looked at a cross breed they look comfortable

[@danbaumgardner1192]

Check out a ProTECH micro. I like the full kydex mounted to leather.

[@williamhernandez5233]

Does anyone else have issues with front sights moving after a few mags???

[@InferiorRifles]

I personally have not.

[@patricklawrence9450]

I have been researching this gun for awhile now. I am 6’4. If this gun fits him well at 6’8, I’ll be ok with it. Thank you!

[@wildwolf8983]

I don’t get what your height got anything to do with any gun fit?

[@InferiorRifles]

@@wildwolf8983 tall people usually have larger hands. Not a difficult concept lmao

[@FloridaMan762]

your 6'8 Gyatt damn!

[@ThisIsWhatIDo77]

I was concerned about the 17 round slide and how hard it was to rack slide. I was going to carry 17 plus one but decided to carry 16 plus one, thinking it would be more reliable. I figured if you fired first round the next round would be easier to load since there is 16 rounds instead of the harder to rack 17 round total.

[@nelsonhoward504]

One word outstanding ps been considering one but put off about the mags rusting

[@RandyRanck]

You are right about the spongy trigger, I wouldn't change a thing except for it.

[@GreymanEDC]

So at $55 a piece retail, getting 4 mags is a huge plus!!

[@jbdoingjbstuff]

yes. and now thru December, Sig will give 3 free mags via rebate on any new P365 purchase.

[@TheLiquidss]

Also Icarus Precision made some great grips for P365

[@14KrisDavis]

The mags just need to be broken in. After a few range trips it's much easier to load the mags and chamber a round

[@devrinmg]

I ditched my g19 for the 365xl about 2years ago and have pretty much carried it everyday since, I shoot it so well and am very confident with it. Loved the g19 and originally was going to only use the xl In summer as I’m a smaller guy and really had to pre plan what I wore during summer with the g19 but ended up shooting it so good just can’t see going back 😎

[@spll3906]

Wish i could make my self like the rest on the sig but for me its a no go.

[@TheRios7018]

That sig looks like a toy gun with your huge hands! Great video sir!

[@Aa-ron22]

Mine was stiff like that, too. Finally broken in after 800 rounds or so.

[@ethanoakley8406]

I just put one on layaway 4 when I turn 21

[@marcusjackson271]

I knew you were a big dude when i saw how you were holding this pistol in your fingers. The TACOPS is relatively large in my hand and you're handling it like I do a standard p365😂

[@JustisGarabrandt-wx2mn]

Yea it SHOULD be cheap to change the grip frames. That was spose to be the point. But these companies making them are charging $400 for a grip frame… you can buy full guns for 4-$500. So I can’t quite understand why someone would buy a x macro for $800 then spend $400 on a grip frame. Now add a $350 red dot. A trigger, some extra mags, jeez by the time you do this your at a $2000 carry pistol lol… I get the modularity of it and it’s great for certain things when your using basic products. But to buy a $400 grip frame is absurd to me. To each is own tho I guess! Nice video.

[@InferiorRifles]

The $400 grip modules you’re referring to are full CNC aluminum. It’s a complicated part to machine and then has to be anodized or coated in some way. All of which meaning it will be expensive when compared to Sig’s $65 OEM polymer grip modules. People typically add the upgrades you mentioned because they add something that the gun previously lacked, even if that “something” is just a better feel or aesthetics. If you don’t see the value in an upgrade, don’t install it. None of this takes away from the Macro itself being a fantastic carry gun.

[@kawikadavid8958]

I don't think it's a glock killer because it has many issues. If yours don't have issues then you are one of the lucky ones.

[@kawikadavid8958]

The best sig is the p226 and p229.

[@GreymanEDC]

I can confirm you only get 2 17rnd mags in the Xmacro comp version

[@Asidebar]

You get 4 mags in the Tacops

[@2aholes402]

Nice gun. The ND's being reoort by the P320 give me pause.

[@tacratt6091]

The 365’s are a totally different animal! I haven’t heard of any ND’s with the 365 series of pistol’s!

[@2aholes402]

​@@tacratt6091that's good to know. I have heard the FCG was similar with a couple difference hopefully that is the case

[@dukedynasty]

Wish the 365 was ambi. Would be awesome

[@chesterbateman1753]

Very good vid. XMACRO IS BOSS