Replacing Operating and Stationary Panels on 200 Series Gliding Patio Doors | Andersen Windows

Learn how to replace the panels on Andersen® 200 Series Perma-Shield® Gliding Patio Doors.
For more information about the content in this video visit: www.andersenwi...
Subscribe for more Andersen Window and Door Content: / @andersenwindows
More from Andersen Windows:
Instagram: / andersen_windows
Facebook: / andersenwindows
Pinterest: / andersenwindows
TikTok: / andersen_windows
Visit our website: www.andersenwi...
Request a Quote: www.andersenwi...
Andersen Parts Store: parts.andersen...
#AndersenWindows #LoveTheLifeYouSee #AndersenWindowsandDoors

[@yenhuynh3970]

Why is the Operating Panel Interlock Weatherstrip installed on the stationary panel in the video?

[@anirbanmandal1099]

It’s completely wrong , the weather strips shown has to put on opposite doors . My weather strips clearly says stationary and operating - following this video I tried it and it was never closing . Finally I had to put the stationary one on the fixed glass and operating one on the moving panel and then it worked

[@bigpardner]

From 3:47 to 3:52 , as the panel is being lifted and removed, what is that sticking up a bit from the sill that was behind the panel? Is that the sill filler or sill filler flange and is it also screwed into the sill? Is that the only thing holding the bottom of the panel onto the sill (which at least in mine slopes out)? It's plastic isn't it? If this is correct wouldn't metal be better up to the task?

[@bigpardner]

Also, after the stationary panel is lifted out, what are those two dark objects remaining on the sill?

[@contractor08831]

@@bigpardner I believe those lock the panel into place as it slides into the frame

[@bigpardner]

I I think you screw it into place. Not sure if you screw it to the door before sliding it in, then screwing it to the sill. or vice versa. Also not sure if all holes are pre-drilled. I know on both my doors, 1985 I'm guessing, they didn't do a good job such that the lower, middle corner of the stationary panel has, over time, slid out too far and impedes the screen door. Maybe because the piece is plastic and not metal, maybe because not enough screws due to design or the installation. Will have to fix.

[@yoon8678]

Same here.. I have my door moving away from where it should be... not sure how it's kept in place at the bottom..

[@dfspcc5221]

My parts were completely reversed at the sill from what is shown here, and the door in the video must be made of hollow plastic. The one I have weighs at least 60 lbs or so it seems. I lift weights and could not get the stationary panel in without help from another man. But it was good for showing the parts, they just weren't where you showed them to be.

[@bigpardner]

What does the "sill filler" do? Why is my stationary panel bulging out at the bottom near the center preventing the screen from fitting on the rail? I'm looking at this video hoping to see what holds the bottom of the stationary panel in place onto the sill and so far I'm not finding anything.

[@gpmaher]

Why is your stationary panel bulging? Because it’s an Anderson product

[@joritabatten3507]

Fixed glass panel of patio door replacement

[@jerseyjim9092]

What gives Anderson? He seemingly has the operating weatherstriping reversed with the stationary weatherstriping. The parts that came with my 200 door are clearly marked as operating and stationary. If what he's doing is incorrect, this video should be revised or deleted.

[@gpmaher]

I wouldn’t buy Andersen anything... worst product... our entire neighborhood part of a class action lawsuit

[@andersenwindows]

Hi Gerard! Thank you for reaching out. If you need further assistance please contact our Customer Support at 1-888-888-7020 from Mon-Fri 7am - 6pm CST Saturday 8am - 3pm CST.

[@gpmaher]

So, as part of the class action lawsuit, Anderson was to send replacement doors and Windows. The sent me the wrong size doors... idiots