Replacing Shimano BB bearings with FAG 6805-2RSR Standard size 7mm

[@locoshaggy]

Excellent tutorial friend. I did the same with a shimano press fit box, I mounted the 25377 bearings and they go better than the original shimano since they are double sealed, not on one side like the shimano. They also rotate much more, what they rotate looks like ceramic. use the original plastic caps that you bring for the 6mm bearings, just file them with a file slowly so that they are even and fit the 7mm ones well. I got the axis of the cranks to pass smoothly through the covers and the result was incredible. I have much less resistance to pedaling and I can replace the bearings whenever they break down.

[@jhontejada5773]

Thank you very much, you shared a brilliant Idea to make this thing simple to audiences, keep a good work. Excellent!!!!

[@andreasr6632]

So actually the plastic sleeves are the failing points of Shimano pressfits and the bearings if they have not got any rust and wear could be salvaged and reused. Good to know! I went with Contec Boxfit threading presfit BB for my hardtail and a same one from Willier for my road bike , so that i can change the bearings anytime i like without all the fuss. I only wish the body of the bearing cups was stainless steel though and not aluminium cause eventually it will get worn by the harder stainless bearing outer ring.

[@rafa6311]

Good contribution More please. greetings from Spain I guess it's the same for my Orbea orca M20 bb86

[@SuperBodul]

61805 (6805) 2RSR-HLC FAG/INA 25X37X7 Bought on Croatian store : www.trgo-agencija.hr/lezaj-61805-6805-2rsr-hlc-fag-25x37x7.html Not in stock right now

[@848fmk]

Great video. Very informative. its striking to see how small the ball bearings are. Probably just over 3mm with gaps..What a contast to the old bottom brackets with loose 11 x 1/4" ball bearings with minimum gap supporting the axle. In your video, what size is the plastic pipe fitting? Is it a 40mm socket X 11/4" bsp male adaptor? ABS or PVC?

[@reinaldomackintosh2278]

Very nice video, thanks for this. I wonder if you can make one video for converting BB95 bearings (TREK carbon MTB) for use with the new DUB cranks (28.8mm spindle) of SRAM.

[@SuperBodul]

No, because i dont have any of that parts, everything in the video is mine, and it is my only bike :)

[@NinoSpinner]

Ottima soluzione, volendo con una piccola fresa si può eliminare quello scalino di 1 mm nel tappo copri cuscinetto, ma si dev'essere molto bravi 👍

[@boyhauten8399]

Thank you!!

[@tiggy2756]

Great video thanks can sort out play now

[@stevecarleton163]

I wonder if it would be better to abandon the shimano shells and buy a chinese bottom bracket like a ztto from aliexpress. These shells are already made for the 6805 bearings. When you get the ztto BB, take out the bearings and replace with FAG or NTN high quality bearings.

[@SuperBodul]

Maybe, i did this just to try few things and see what it can be done, and it is still going. If the material is good and tolerances are precise on those chinese BBs it could work, but cant say anything bad about Shimano Glass fiber plastic BB

[@stevecarleton163]

@@SuperBodul Its a great video Bodul. Until now i had been dumping my BB's. its video's like yours that have got me thinking about how to do better so i really appreciate it. I really like the idea of choosing your own bearings and grease etc. giving you lots of control. I guess we don't know how good the chinese ones are. I was going on the reviews of the ZTTO, and some Russian guys seem to be trying it. I am all for experimentation, so i think i will try it next time (just got a new BB so will take a year to degrade).

[@stevecarleton163]

Hi, i am about to do what you suggest now. I am refurbishing an old Shamano BB and putting NTN bearings in it. I gave up the idea of the chinese BB because i don't know the quality and i have the shimano cups already which i know are good. So are the end caps still holding up? Do you think you need a rubber seal between the end cap and the bearings? I live in a wet and cold climate and am about to go into winter so i need it to be well protected.

[@SuperBodul]

@@stevecarleton163 i live in dry and warm area so i never though about extra seals. Plastic cups are holding well after 3500km, no play with the cranks

[@stevecarleton163]

@@SuperBodul At the end of the video you mention the 0.3mm spacer you needed because of the thickness of the shimano vs chinese but you don't show it (probably because its on the bike already). That can't be easy to do.

[@sfluk7000]

Nice hack, thx!

[@KizaSoFierce]

by doing so, does the plastic fitting contacts the outer sleeve of the bearing as well? If so, it will cause additional frictional forces.

[@SuperBodul]

In my case doesn't touch, have no problem there. And after a year it still spins well

[@rafa6311]

I do not understand your language, could you provide me with the reference of the sealed bearings that replace the originals and where they can be bought by stopping the video I cannot appreciate it. It is clear to me that the dust cover must be changed. Greetings and thanks for sharing

[@Tntdruid]

You can get 6 mm bearings.

[@herminigildodelacruzjr1752]

Nice tutorial thanks

[@Tntdruid]

Why are you not using any grece?

[@rosomak8244]

Fresh bearing come pregreased and it is all plastic over there. No need for greasing.

[@philhunt1442]

wait wait wait hold on, where do get the bearing tools specific to this bb like that expander ring

[@SuperBodul]

I bought expander ring in the store that sells bearings and car parts. I bought 26, 27, and 28mm versions not knowing which one which one will fit best - I think it is the 27mm at the end used to extract bearing. There are specific bearing extractor tools out there but this is much cheaper. Other things I already had around my workshop. Didnt even bought the plastic pipe piece, i just know it is used for pool plumbings.

[@jorgechavira7729]

Just out of curiosity, dont they sell same size and quality replacment bearings?

[@SuperBodul]

6mm thick version is non-standard, you can buy them i think but not from SKF, NTN, FAG or other premium brands - they only sell 7mm standard version. 6mm are originale made by sunhill for shimano, and you can find chinese and indian copies online but I wanted legit pemium ones so went with FAG which I found localy

[@jorgechavira7729]

@@SuperBodul ok, wise choice

[@jojoanggono3229]

Does Shimano BBR60 uses the same bearing, the 6805-2RSR? It's an Ultegra/105 BSA threaded BB.

[@SuperBodul]

Not sure, i don't have it to check. Maybe you can find some info on internet

[@ArifianNurcahyono]

2:48 what the size of pvc pipe ?

[@Ar0wally]

hi, how do u find the extraction n installation tools to exchg the bearings? are they parts from BB installation/extraction tool?

[@SuperBodul]

For this I used various washers, nuts, bolt and spring ring from my workshop, not part of any set

[@Ar0wally]

@@SuperBodul how would i know which of these to use for..

[@angeloenanodestura5272]

What do you call or where can i find that metal ring?

[@SuperBodul]

We call it Seger, you can find it in any store that has bearings

[@andrewslade7867]

It is called a circling in England or Snap Ring in USA

[@tommyaditama435]

Ceramic or no???

[@SuperBodul]

No, steel

[@adesopyan1878]

Bearing c3?

[@SuperBodul]

Not sure, it doesn't say anywhere. Still spins perfectly, after more than a year!

[@cagr4249]

Both bearing races mounted in PLASTIC...?! "Interesting" design. 💩