Replacing the shaft seal on Aqua Flo hot tub pump

[@voipexpert]

I was trying to get the impeller off with a flathead screwdriver and pliers. You sir are a genius!!

[@statusquofugitive8554]

Thank you so much! This was just the information I needed.

[@markczechalien3592]

I almost installed the impeller without all of the seals, LOL Likely I watched the video

[@Holdfast]

Is it necessary to remove the volute? Can you not just pry the seal up and out?

[@Poolandhottubdepot]

The seal (white ceramic mating ring) in the volute can be removed without removing the volute from the motor but its easier to install the replacement and ensure it is seated properly with the volute removed. When the new seal is installed it must be seated and even. If its not seated all the way and uneven it will leak soon as the pump starts.

[@Holdfast]

@@Poolandhottubdepot thank you! I understand proper chemical balance is important but Is it normal to have to replace this seal every couple of years?

[@Poolandhottubdepot]

@@Holdfast Are you using a basic value grade seal or a Viton grade? Seal life is dependant on chemical level maintenance but also the seal quality it self, value grade seals tend to have a shorter life, North American made Viton grade seals typically can last longer if chemicals are maintained in our experience.

[@nzbroker]

Thanks very informative video!