If you're having issues booting into Rescuezilla, try selecting "graphical fallback mode" instead. Also make sure you restart out of Windows instead of shutting down if you're trying to clone or backup. Shutting down Windows can put it in a hibernation state and prevents it from being cloned.
@AJ-po6up Жыл бұрын
You can also perform a full shutdown by pressing and holding the Shift key while clicking Shut down in the power options. Or even use "shutdown /s /f /t 0" in the command line.
@PhazerTech Жыл бұрын
@@AJ-po6up Thanks for the tip!
@brianf7912 Жыл бұрын
Set your power button to shutdown instead of hibernate in the power options.
@t_srossuck_stout790417 күн бұрын
Thank you so much for the video. We used Rescuezilla and BalenaEtcher to move our Windows 10 OS from a 512GB SSD to a larger 2TB SSD, and it worked a treat. No dramas, just followed your instructions! Really appreciated your efforts to make things clear and simple.
@PhazerTech16 күн бұрын
That's great to hear, happy to help!
@esra_erimez Жыл бұрын
This video was really very helpful. I've always struggled with clonezilla's user interface and had no idea about rescuezilla. Thanks for the great video!!!
@DevilbyMoonlight Жыл бұрын
just keep in mind when using clonezilla that you pick the destination before the source, keep that in mind and your golden!
@PhazerTech Жыл бұрын
You're welcome and thanks for the comment, I'm happy to hear you found it so helpful!
@KarmaGachu Жыл бұрын
With Macrium Reflect Free end of life this will be its replacement, thank you.
@PhazerTech Жыл бұрын
Yep it's unfortunate companies like Macrium are doing that. Thankfully FOSS exists!
@ethansight19 күн бұрын
Thank you! Just successfully switched out my m.2 drive in the ol thinkpad. Rescuezilla froze on first attempt at 3%, tried it again with "rescue" checked and it cloned after 6 hours. Windows had no trouble booting up! I did run sfc /scannow after and it said there were some files it had to replace. One more thing for anyone attempting this, I couldn't extend the partition in rescuezilla because bitlocker had encrypted everything. Something you can turn off in windows beforehand! In my case I turned off bitlocker on the new drive and used a third party to move the recovery partition to the end. Then I used windows own tool to extend my c drive to the full 2tb. Good luck!
@PhazerTech18 күн бұрын
Thanks, good advice for those who run Windows with bitlocker
@davesmith81012 ай бұрын
This a really good video. I had no idea that Rescuezilla was so versatile, thank you.
@PhazerTech2 ай бұрын
Thanks, yea Rescuezilla is pretty awesome and they weren't joking when they said it's the "swiss army knife of system recovery"!
@SusanAmberBruce7 ай бұрын
Hey! I want to thank you for your video, I just cloned Windows 11 from 500 G byte M.2 drive to 1 T byte M.2 drive, it was easy-peasy, now I got room for more games Hara!
@PhazerTech7 ай бұрын
Awesome I'm glad it worked out for you!
@pestpatroller Жыл бұрын
I just cloned my hdd( Linux Mint 21.2) to a new 1TB ssd and everything worked as advertised...except resizing the partition afterwards. GParted (on the Rescuezilla USB) saw the unallocated space but would not resize the partition. Luckily, Disks was also on the Rescuezilla USB and that got the job done.
@PhazerTech Жыл бұрын
Thanks for the tip in case someone else has this issue too.
@jwren51 Жыл бұрын
Excellent clear & concise video. Thank you.
@PhazerTech Жыл бұрын
Happy to hear that!
@jitendergupta347 Жыл бұрын
Very well explained. Thanks. Looking forward for more tutorials from your end.
@PhazerTech Жыл бұрын
Thanks bud, happy to hear it!
@mdd19638 ай бұрын
9:19 It should be noted that as imaging merely copies/compresses the utilized space of the main drive, the destination drive does not need to be larger than the source drive, but, need only be large enough to save the default compressed image afterward; I just imaged my 2 TB 990 Pro WIn10 install w/ 330 GB of used space onto a 250 GB image on a 1 TB external USB drive.
@PhazerTech8 ай бұрын
Yep I probably should have mentioned this, thanks!
@yountune97996 ай бұрын
OMG! KZbin algorithm led me to this page! It did right by me!
@gerydblackmore54842 ай бұрын
Does it resize portion going from smaller dried to bigger drive.
@dickdomain719 Жыл бұрын
Super nice detailed video, thank you so much!!
@PhazerTech Жыл бұрын
Glad you found it helpful!
@CCoburn310 ай бұрын
Just a tip. Starting your videos with a BLAST of noise is probably not the best idea. I'm sure you like it, but people don't usually watch these videos in bars. Often they watch videos at work or in places where they don't want to disturb others. Having a video come on with such a high volume of noise in such a situation is not helpful. All that being said, the content of your video was good. I wish you luck in the future of your channel.
@PhazerTech10 ай бұрын
Thanks for the comment. I try to make the intro a reasonable volume so that it's not louder than my voice, but if you're coming from another video that had low volume then I can see how it could disturb others. However if you're concerned about bothering others then using headphones would probably be a wise decision.
@mufeedco Жыл бұрын
Thank you, great video.
@podroomstudio57658 ай бұрын
Great video. Straight to the point.... clear and concise. Thank you.
@PhazerTech8 ай бұрын
Thank you that's what I aim for!
@PaulG.x4 ай бұрын
It is generally recommended to use the windows disc utility to resize the windows partition
@MiniMinotaur675 Жыл бұрын
Thanks for this guide, I was able to upgrade my main SSD because of it
@PhazerTech Жыл бұрын
Great to hear!
@rmcellig4 ай бұрын
Excellent! Thanks.
@CHOPPY509 ай бұрын
Thank you for the video and detailed explanation 👌🏽
@PhazerTech9 ай бұрын
My pleasure!
@teegees8 ай бұрын
Super well explained 👍
@AARPDude10 ай бұрын
Thank you for posting...
@tomski2671 Жыл бұрын
Clarity of what is being done when cloning/imaging is very important as not to make a mistake. Clonezilla is problematic in that respect.
@B_r_u_c_e7 ай бұрын
Thank you.
@MUSiCK99 ай бұрын
Man I remember having this iso until one of my hard drives broke, I forgot the name of it until today! Thank you for this! Wish I had this yesterday as I had to clone my Windows OS using Ubuntu instead due to early signs of a dying drive. On another note so confusing that Windows seems to have a worse experience with back ups stuff. You think paying for something that should exists as a free program would exists but it doesn't. Feels like I'm dealing with apple/android all over again.. Side note that intro peaked a bit too loud for my ears, even as someone who usually doesn't care about volume being too loud
@PhazerTech9 ай бұрын
Glad it helped! I agree Windows is annoying and it's only getting worse. I barely use it anymore. And thanks for the tip about the intro.
@martymoreno639 ай бұрын
Outstanding video!
@PhazerTech9 ай бұрын
Thank you!
@brock2k17 ай бұрын
Very clear and informative, great job. This looks really good for free and open source software, but it is missing a vital (for me) feature that some of the free versions of commercial software have (for now, anyway), namely the ability to open the backup image and read or copy individual files.
@PhazerTech7 ай бұрын
Thanks! Rescuezilla is great for taking bootable backups of entire operating systems, so if your main SSD containing your OS ever dies then you can simply restore the backup to a new SSD and you'll be up and running again. Most other backup software where you can see the individual files don't take bootable backups. There might be some out there, but generally speaking, they're just meant for files and folders, not entire operating systems. Personally I do both types of backups. I use Rescuezilla for my main drive and other backup software for my important files on a daily schedule.
@MichaelJamesWood5 ай бұрын
You could use zip (included in windows) or another free compression program to do that at no cost.
@mariex8009 ай бұрын
Awesome contents. Rescuezilla is awesome. Thanks. I also Luv AOMEI. I got the pay version of AOMEI. Beside creating a backup image using AOMEI, it include backup files, sync, and many other great features.
@KN-5926 ай бұрын
legend
@HobbyOrganist3 ай бұрын
I am trying it now to close linux mint to a new build and drive, it seemed to work perfectly, I cloned my daily user to anexternal m2 drive via USB, 2 hours later I looked after it was done and could see the Desktop looked right, files all there, so I'm cloning it to th enew build now, hopefully in about 2 hours I can book that one up and see if the clone worked properly! EDIT: Looks like the cloning process worked perfectly!
@PhazerTech3 ай бұрын
Awesome glad to hear it, enjoy your new build!
@adamdark12002 ай бұрын
Thx!
@tomn5413Ай бұрын
Awesome video. Any issue or different way if I clone the destination drive that smaller than the source drive? Thank you
@PhazerTechАй бұрын
Thanks! If the destination drive is smaller than the source drive then you'll need to resize the partition to a smaller size that can fit on the smaller drive before you do the cloning or backup. Then after cloning/restoring, make sure to expand the partition to fill the new drive.
@nitishhukkeri51377 ай бұрын
Probably a stupid question but can I use this cloning method to copy files from on external hard drive to another? Seems like the generic copy feature takes a lot of time
@PhazerTech7 ай бұрын
Yes but it will copy the entire drive, including partitions. If you boot into your OS with both drives connected they might conflict with each other. It's probably not the best choice if you just want to transfer files.
@robertmaxa66314 ай бұрын
Ive used the predecessor of this program, "Redo backup and restore", back in the day. It works, but it's not the fastest backup program. I wish someone could develop an open source program that could restore to dissimilar hardware, like what Acronis, which seems to have the monopoly, at the moment.
@PhazerTech4 ай бұрын
If it uses compression then the backup speed will depend on your hardware. Also I've been able to restore a Linux install to a different computer but it required GRUB to be manually reinstalled.
@Tsachyl7 ай бұрын
Thanks much - well explained, demonstrated & very good tutor. Now can one clone a dual-boot disk having W11 + Linux MINT on it at the same process (e.g. one physical drive with EFi, NTFS & EXT4 partitions on it)? TIA TL
@PhazerTech7 ай бұрын
Thanks! That's a good question and I'm not 100% sure but if I had to guess I think it will work. Normally after its done cloning it will check for a bootloader and reinstall that if necessary. I don't see why it wouldn't be able to do that with two OSes. But I suggest testing it yourself to see if it works.
@jaseem44833 ай бұрын
I am also looking for a tutorial for the same dual boot system cloning.
@remiggiosonofattimiei1979 Жыл бұрын
TYSM
@rcbwoodcraft7 ай бұрын
Good Video
@PhazerTech7 ай бұрын
Thank you!
@Velioris9 ай бұрын
They try to phase out the free Versions...✨
@MUSiCK99 ай бұрын
Ikr it's getting stupid now, It's already bad enough that so many free window programs already have an air of danger around them.
@MrBowBow6 ай бұрын
Unfortunately my scenario was slightly different I'm actually downsizing from a 2tb HDD to 1tb SSD won't work. Debating whether to edit the partitions don't really want to risk messing up my data
@PhazerTech6 ай бұрын
Resizing a partition is pretty safe, but to be extra safe I would do a backup first. Of course, you'll need an extra drive to save the backup to.
@greatwolf. Жыл бұрын
When doing an image backup(not cloning), does the destination need to have enough space to hold the entire unused capacity of the source? For example, say you're backing up 32gb of data in a 512gb drive, does the destination need to have 512gb free or is 32gb sufficient(likely even less thanks to compression)?
@PhazerTech Жыл бұрын
In that case you would only need 32GB free, and yes it's likely less thanks to compression. BTW when restoring to a drive, that drive needs to have at least the same amount of space as the drive that was backed up. So in your example, at least 512GB. If you wanted to restore to a smaller drive, for example 256GB, you'll first need to shrink the partition on the original drive before backing it up.
@tharakasamaraweera84405 ай бұрын
is possible to clone IP to IP server in cloud ?
@lancetheguywhogames2 ай бұрын
Can i clone my 465 gb ssd to a 2TB flash drive, replace my drive with a 1TB then reinstall the OS from the flash drive?
@PhazerTech2 ай бұрын
Yes that should work. Use the backup/restore functions.
@lancetheguywhogames2 ай бұрын
@@PhazerTechI don't have the OS on my flash drive, I meant to say could I take the clone of my drive which I copied to my flash drive and then clone that onto the new 1TB SSD?
@lancetheguywhogames2 ай бұрын
@@PhazerTechok I tried the method asked about and it cloned the drive to the flash drive but the after report says failed to resize partition 3 any idea what that means?
@lancetheguywhogames2 ай бұрын
@@PhazerTechI replaced the my hard drive with the new SSD but now recuse Zilla won't start it just says no cache and black screens
@PhazerTech2 ай бұрын
@@lancetheguywhogames Like I said, try the backup and restore options, not clone. You're not planning to boot from the USB drive so there's no point in using clone. And if you're running Windows then that can lead to problems since Windows can't run off a USB drive anyway.
@serenityedits1857Ай бұрын
Thanks bro, saw other videos too, hit that sub too.
@Leet_Builder21434 ай бұрын
Can the UEFI partition be moved? Mine is the 2nd partition and I really want it to P1.
@PhazerTech4 ай бұрын
I believe so, I'm pretty sure Gparted allows you to move partitions.
@SuperFredAZ Жыл бұрын
Nice video, however this program is almost useless with a 4K monitor, I could barely see the screen the text was so small and light.
@PhazerTech Жыл бұрын
Thanks, fortunately there's a solution. Right click the desktop background and go to 'Display resolution and layout'. Then right click the active display and you can change the resolution to 1080p.
@SuperFredAZ Жыл бұрын
@@PhazerTech thnx for the quick reply, it sure wasn't obvious how to do this.
@PhazerTech Жыл бұрын
@@SuperFredAZ Sure thing, I agree this is something that would have been useful to mention in the video.
@jaseem44833 ай бұрын
Hi. I have a dual boot win 11 and arch linux currently in a 512gb nvme. I want to clone both and migrate to a new ssd of 4tb . Is the procedure same?
@PhazerTech3 ай бұрын
Yes it should be the same, but I've never personally cloned a drive that contains two OS so I can't say for sure. It should be fine.
@PaganWizard5 ай бұрын
I am going to upgrade one of the HDDs in my computer, it's a secondary drive (not the C drive), and I use it for all of my online games. The reason for the upgrade is not because of performance, but capacity, I have a 2TB drive that I want to replace with a 6TB drive. With this software, can I clone my existing drive to the new drive, and use the new drive for gaming without having to reinstall anything??? Thanks in advance!!!!
@PhazerTech5 ай бұрын
Yes this software can accomplish that, just be sure to expand the partition after cloning it so you can get the full 6TB of space.
@rick999h6 ай бұрын
is clonezilla and rescuezillla the same program or are these independent things? What is better for restore my failing windows drive?
@PhazerTech6 ай бұрын
Yes they're the same thing but Rescuezilla is easier to use and has less features compared to clonezilla, but for most people it has everything they need. I recommend trying Rescuezilla first.
@neilquinn8 ай бұрын
Will that little 1mb "unallocated" space left over (6:51) from gparted still remain in windows? That would drive me crazy. Also any issues doing this to clone from an ssd in a laptop temporarily to a drive in a USB enclosure?
@PhazerTech8 ай бұрын
The 1mb isn't accessible, not a big deal though. Also Windows doesn't allow you to boot from a USB drive.
@shifureisaikyou205510 ай бұрын
Better than True Image, especially their new version Cyber whatever
@mdd19638 ай бұрын
Agreed....!!!!!!!!!!
@Yuusea Жыл бұрын
I've followed all the steps up to booting up from the new drive in the BIOs. I've changed the boot sequence to boot from the new larger drive but it always falls back and boots from my old drive (probably because the old one still has windows installed). How do I change this when I want to keep that old drive?
@PhazerTech Жыл бұрын
Some motherboards might be finicky. I would try removing the old drive and see if the new one boots. If it does then you can safely format the old drive if you'd like.
@eg_raul Жыл бұрын
hey man not sure If you know what I can do, but I've been following this guide, I made the bootable usb with ventoy and everything. The problem is the laptops hdd is partitioned and It is larger than the ssd I am trying to clone to. I have a 500gb ssd and I'm trying to clone the contents of a 1tb drive but everything in the drive totals to around 100gb. Is it possible for me to still use rescuezilla? I'm getting an error that refers to the partitions in the main drive. If anyone here has an answer I would greatly appreciate it. I tried using gparted but I'm not sure where to start lmao
@PhazerTech Жыл бұрын
Hey dude, it sounds like you'll first need to shrink the main partition on the original drive using gparted before trying to clone it. I showed how to use gparted to expand a drive, so you'll follow the same steps except you'll shrink it instead of expanding.
@eg_raul Жыл бұрын
@@PhazerTech dude thank you so much! :) I had a hard suspicion that you would know how to solve this problem haha thanks man! I hope you had a great weekend!
@PhazerTech Жыл бұрын
@@eg_raul Awesome glad to hear it man, you have a great one too!
@DrumInfected6 ай бұрын
going through the steps to clone in the video and finished 100%, but after it says re-installing GRUB bootloader (if any) and has been on that screen for more than a couple hours now and not sure if I should just try and exit out and continue or wait it out. I will wait a couple more hours but it might just be hanging. any feedback is greatly appreciated
@PhazerTech6 ай бұрын
Sounds like it might have hung up for some reason so it should be okay to exit. If the drive doesn't boot then you can repair GRUB with a live USB of your distro.
@DrumInfected6 ай бұрын
@PhazerTech thank you for the reply. I exited out and tried to go to the next step to partition with Gparted but it doesn't even open up. Maybe I should try and go through the process and try and clone again? I got a srttrail.txt on my windows ssd drive and it is now write protected so i'm trying to clone it and fix it with rescuezilla. When I did the step 6 cloning disk, I got a popup window saying failed to run command: ntfsfix --clear-dirty /dev/nvme0n1p1 among a few other windows like this. can I ignore these and still clone? Much appreciated for all the help. 😊
@PhazerTech6 ай бұрын
@@DrumInfected Yes I'd try to clone again. Also I didn't realize you were running Windows, I assumed it was Linux because you mentioned GRUB. If you're still having issues I'd try using a live Windows USB and using the repair tool. Also see this article for more help: www.auslogics.com/en/articles/fix-srttrail-txt-bsod-error-win10/
@DrumInfected6 ай бұрын
@@PhazerTech I tried to clone again and it hung up at the same part. thanks but I already made a windows USB repair tool since I can't get to OS and needed it to get to command prompt to try and fix the issue but not luck. That's why I was trying to perhaps clone the faulty drive with the srtTrail.txt log file and then try and fix it after it was clone, since I don't get the write protection errors anymore and could that route.
@DrumInfected6 ай бұрын
I took the external ssd I cloned and looked at it on another computer and it looks like everything was cloned, so I think i will try and put in PC and see if it fixed the srttrail.txt issue.
@teegees8 ай бұрын
So question: When backing up to an image, if say your source Drive is 512gb in capacity, but there is only 50gb of content on it. Will the resulting backup image be 512gb or 50gb?
@PhazerTech8 ай бұрын
It will actually be a bit less than 50GB since it uses compression. However if you wanted to restore the image to a drive, the destination drive needs to be at least 512GB, unless you shrink the partition first before you back it up.
@teegees8 ай бұрын
@@PhazerTechHey thanks for the quick response. So you mean I would have to shrink the partition on the image first, before restoring it to a drive smaller than 512GB, correct? With what tool would I be able to shrink the image partition? I’m familiar with shrinking hard drive partitions but not image partitions... Thanks for the help!
@PhazerTech8 ай бұрын
@@teegees Sure thing. Actually you would need to shrink it before you make the backup, only if you plan to restore to a driver smaller than 512GB. You can use gparted to resize partitions like I showed in the video.
@lostinthedesert37889 ай бұрын
I want to clone my Win 10 boot drive, I did a system recover not long ago and it added an extra Recovery Partition. Disk Management shows I have 2 healthy Recovery Partitions, 1 Healthy EFI Partition and C: on the boot drive. Recovery Partitions are 1 and 5, 5 is the active Recovery Partition according to reagentc /info. Would I be okay to not include the #1 partition? Edit: I (possibly) misunderstood the functionality of Rescuezilla, I thought cloning would create an ISO of my boot drive, and that I could use to load onto a new hard drive. If I'm wrong here, please let me know. If my last statement is true, I'm going to have to make a backup of my boot drive, remove current boot drive and replace with the new larger drive then restore the backup to that drive. When it shows the partitions being restored, will I be able to remove the #1 partition, if so, should I? Will this increase the possibility of error? Or should I remove it afterward with GPARTED?
@PhazerTech9 ай бұрын
In general I recommend including all partitions to save potential headache later. And to answer your second question, Rescuezilla doesn't create an ISO but creates its own format. The process you described is correct, you'll make a backup, replace the drive, then restore the backup to the new drive. If the new drive is larger you'll need to expand the main partition using GParted. Again, I don't recommend removing any partitions and I'm not sure if doing so would brick your OS or not.
@lostinthedesert37889 ай бұрын
@@PhazerTech Thank you for the reply, you saved me the headache of removing the extra partition and potentially creating problems.
@masterm-cw7go Жыл бұрын
I'm confused rescuezilla create bounch folders under main folder (backed up whole windows disk as image). If I'm correct clonezilla created one compresed image. Are interchangeable images clonezilla - rescuezilla?
@PhazerTech Жыл бұрын
That sounds like the normal behavior, it creates a folder. Clonezilla does the same. If I remember correctly, years ago I tried restoring a backup from Rescuezilla while using Clonezilla and it worked. Haven't tried the other way around though.
@masterm-cw7go Жыл бұрын
@@PhazerTech thanks I realy forgot. I still have clonezilla images on one hdd but I'm to lazy to check.
@hariprasath4842 Жыл бұрын
Hey man, was wondering if you could share some insight on a issue i have, with that being said i bought a new m.2 ssd of 1Tb space i want to transfer all the data and softwares from my old ssd of 256gb space to new m.2 ssd but there is only one ssd slot in my laptop so please help me on how to clone my old ssd to new ssd without using usb enclosure??
@PhazerTech Жыл бұрын
You'll need an enclosure if you want to clone. The other option is to use any external hard drive and do a backup on it. Then swap the m.2 drives and restore the backup to the new drive.
@OldManJimmy13 ай бұрын
I'm on Linux Mint and noticed after downloading Rescuzilla when I right click on the .iso file I can create a bootable USB drive from Linux. Linux RULES!!!!!
@PhazerTech3 ай бұрын
Nice, thanks for pointing that out! Linux most definitely rules!
@TKEnvironments Жыл бұрын
Cool guide! I had a problem after following the steps, my new drive wouldn't boot and it was because somewhere the drive letters got messed (and C:/Windows became D:/Windows on the new drive). To fix I had to create a windows recovery USB, then on command prompt used this command: bcdboot.exe c:\windows worked like a charm after! Thanks for the video!
@AJ-po6up Жыл бұрын
Could this have been because of the moving of partitions? or perhaps you had both disks connected when booting the new disk, and Windows still labeled the old one as C: and the new one as D: 🤔 I'm curious because this shouldn't happen.
@TKEnvironments Жыл бұрын
@@AJ-po6up i think you got it, I tried to boot the new drive while the old one was still connected and windows messed up the assignments on the new one
@PhazerTech Жыл бұрын
@@TKEnvironments Thanks for the comment, might be helpful for others who encounter this too
@kobeniburgerking90269 ай бұрын
Hi, I can’t seem to expand the partition in the GParted step. I suspect this is because the partition is a BitLocker file system. Is there anyway I can bypass it?
@PhazerTech9 ай бұрын
I believe you'll need to expand Bitlocker partitions inside Windows 10.
@mdd19638 ай бұрын
Bitlocker needs to be disabled ahead of time for imaging/cloning to work on Linux systems, and likewise, 'secure boot' disabled in BIOS to boot Rescuezilla.....@@PhazerTech
@derekswitzer9624 Жыл бұрын
Does this save the backup as an img file? Or proprietary backup that only rescuezilla can restore?
@PhazerTech Жыл бұрын
It's not an img file, only rescuezilla can restore it
@mdd19638 ай бұрын
The images are also compatible with Clonezilla...@@PhazerTech
@Joash-James Жыл бұрын
Hey man, was wondering if you could share some insight on a issue i have, with that being said my main drive c: a ssd is some what got bad sectors i really dont want to reinstall i have a spare ssd same size will this software clone my main ssd as the others and failed also chkdsk fails even hdd regenerator... please help & thank you in advanced
@PhazerTech Жыл бұрын
It's hard to say. If your drive has bad sectors then it might be possible to clone it if you check the "rescue" option that I mentioned in the video, but there's no guarantees. The same goes for any recovery software. You might need to install a fresh OS unfortunately. That's why it's important to always keep backups of your important data. Best of luck.
@Joash-James Жыл бұрын
@@PhazerTech it didnt work but thanks for the help, what i ended up doing is using robocopy command to copy the important files, now for a fresh install of windows i will try and format that ssd check if bad sectors still on it if so then its going out the window
@maxking85 Жыл бұрын
can the Rescuezilla clone 1TB HDD to 512GB SSD?...sorry just curious...
@PhazerTech Жыл бұрын
It should work if you first shrink the partition on the 1TB drive to something that can fit in the 512GB drive, then do a backup/restore instead of a clone. I've successfully done this with a Linux distro, but your mileage may vary.
@mdd19638 ай бұрын
Cloning to a smaller drive will not work , which copies the entire drive, empty/unused space and all...; you can, however, image to a smaller drive as long as the compressed image fits onto the free space of the smaller drive..@@PhazerTech
@CHSSTATIC9 ай бұрын
I need a usb to boot this on pc?
@PhazerTech9 ай бұрын
Yes that's correct. Check out my video on Ventoy: kzbin.info/www/bejne/hIKxo4Z7e9uNi5I
@mdd19638 ай бұрын
Or an old school external DVD drive will work as well...@@PhazerTech
@jorelldye4346 Жыл бұрын
This software has issues. You cannot clone from a larger drive to a smaller drive even if you shrink the volume first.
@PhazerTech Жыл бұрын
Do a backup/restore instead of cloning. I've successfully cloned a drive with Linux to a smaller one before with this method. And yes you need to shrink the partition first.
@jorelldye4346 Жыл бұрын
@@PhazerTech I tried both methods with the same result unfortunately. The image was only 160gb and the destination ssd was 223gb useable. I received the same error.
@PhazerTech Жыл бұрын
@@jorelldye4346 Strange, not sure what the issue is. Does the drive have Windows?
@jorelldye4346 Жыл бұрын
@@PhazerTech Yes. The typical 4 partitions on GPT.
@Kyouma.19 күн бұрын
So I could technically install Windows to an external SSD, optimize it, and then clone it to an SSD of the same size?
@PhazerTech18 күн бұрын
Unfortunately Windows can't boot from a USB drive, so I don't think that would work.
@Kyouma.22 сағат бұрын
@@PhazerTech It can boot from an external SSD drive. There's literally a video here on KZbin where the Windows 10 iso gets flashed to an external SSD, loaded via the boot menu, and installed onto the external SSD. It's called "How to Install Windows 10 or 11 on an External USB Drive / Step by Step"
@PhazerTech22 сағат бұрын
@@Kyouma. Sorry I meant to say you can't install Windows to an external drive, at least not officially. Go ahead and try it yourself, the installer will complain saying Windows can't install to an external drive. It looks like you're correct that it is possible with work-arounds, but like I said it's not officially supported.
@Mantikal7 ай бұрын
This sounds so much better at 1.25 speed - try it. Caffeine is the non-tech fix.
@richard9492 Жыл бұрын
OK, I'll try by best to be respective here. Seriously, not a joke. And here it is: IMO, why dilly dally around with a primitive software such as rescuezilla when there is Macrium out there which really shines ! I tried it; it's crude and it sucks !
@PhazerTech Жыл бұрын
lol that was a good joke!
@jorelldye4346 Жыл бұрын
Macrium corrupted my source drive during a clone. I didn't realize that was even possible, but it happened.
@mdd19638 ай бұрын
I've never had Clonezilla or Rescuezilla fail to make a good clone or backup image, and have utilized both when upgrading numerous laptops....
@Nezello16 күн бұрын
When I boot it boots it goes to max resolution 3840x2400 cannot change or see, does not find my hard drive as well.
@PhazerTech15 күн бұрын
Go to display settings and lower the resolution, that will make everything bigger and easier to see.
@Takedown878 ай бұрын
This one is soooo mutch better than clonezilla, i literally love it. Thats awesome software! ❤❤❤ Also just wanna say that the biggest factor to how fast one backup will be created is how fast your hard drive is. For example backup between my two ssds takes 4 minutes. But backup from ssd to hdd takes 30 minutes on the same pc
@PhazerTech8 ай бұрын
Yep I agree! And yes you're correct about the hard drive being the main bottleneck when doing clones or backups.
@MrFirewassim18 күн бұрын
I'm geting an error when trying to resize :( The error happens at "ntfsresize -i -f-v /dev/nvme1n1p3" according to the logs, any idea ?
@PhazerTech16 күн бұрын
Did you restart out of Windows or shutdown? If you shutdown it might be in a hibernated state which prevents you from modifying it. See this thread about a similar issue: sourceforge.net/p/rescuezilla/discussion/support/thread/726156286e/
The location you provided looks like a backup. Are you trying to save a new back up there? Try /mnt/backup/ instead
@DaYungBoss26 Жыл бұрын
Is it possible to clone 512GB nvme ssd my available space is 245 GB free unused to a 500GB HDD which is used as a backup to keep my backups saved so i dont lose anything in the future but i was gonna move it to my WD external hard drive that has 2TB which i also formatted as a backed up in gaming PC..... i purchased a new 2TB Samsung Pro 980 NVMe m.2 ssd but has to be installed and formatted so i can reclone the windows 11 OS to the new ssd ... Im just wondering if i could do this without buying a adapter to format the new ssd drive if any tips work let me know i appreciate and im a new follower im hoping guide can help me do this today
@PhazerTech Жыл бұрын
Here's what I recommend doing. You should do a backup, not a clone. If you do a backup you can save the drive as a file on one of your storage drives. Then you can restore that backup to any SSD you want, just make sure the new SSD is the exact same size or larger than the original SSD that was backed up. This way you won't need an adapter, you can just swap out the SSDs and then do the restore. Hope this helps.
@PhazerTech Жыл бұрын
Sorry I meant to say just make sure the new drive is the exact same size or larger. I edited my original comment
@mdd19638 ай бұрын
For cloning, the destination drive MUST be of equal size or larger...; that last 12 GB is problematic for many 512 GB SSD owners!