Resetting MyKey with 1 key, must be remote start and push button ignition

[@braidoldeltoro7545]

Dude your honesty a legend just saved me 200 bucks on another key

[@hellraizer50]

Thank you. I'm happy it worked for you. 👍🏻. I'm happy it helped.

[@Paracosmicality]

Just worked for me!!!!thank you so much brooo 2015 mustang. I just started car normally with brake, gave key to someone to walk away with, waited till they got decent distance, then cleared codes like twice, turned off car(it says restart now or get key) restart the car, boom menu was there. Cleared mykey. Been trying to find solution for like 8 months

[@hellraizer50]

I'm glad it worked for you!

[@Paracosmicality]

@@hellraizer50 thanks, took 8 months to finally find a solution

[@jasminemartinez8303]

How’d you do it exactly step by step. I have the same car. But I cannot get it to work

[@Paracosmicality]

@@jasminemartinez8303 1. Start normally with brake. 2.Give key to someone and have them walk far away. 3. Clear codes like 3 times in a row. 4. Turn off car. It will say restart now or get key. 5.restart right after turning off in step 4 6. Menu should be there.

[@jasminemartinez8303]

@@Paracosmicality how many times did it take you to get it?

[@jasoncurrie475]

On a 2016 mustang it needs one little modification whenever it asked to restart the engine my engine was running but I had to tap my button super fast because if I let the engine die completely without hitting it before it died it would not trip the my key settings but I did it super fast the engine didn't get a chance to fully die before I tapped it and turned it right back on that trip to my key settings and I reset it works perfectly thank you a billion times so much

[@ryang1366]

Absolute life saver!! My admin key chip died, which everyone knows it limits your xm radio stations and volume, max speed etc. thank you for this trick

[@hellraizer50]

You're welcome. I'm happy to help.

[@crisreyes1734]

I didnt believe it was going to work at first....and then i tried again and hy ...i got them erased👍🏼 thanks

[@hellraizer50]

I'm happy it worked for you.

[@blazedbeefpatty]

This worked on a 2018 Ecoboost, had to reset codes 2 times for the message “Restart Now or Key Needed” to pop up. Thank you has been bothering me for months.

[@hellraizer50]

I'm happy it worked out for you.

[@michaelperez5292]

I have the same car and it’s not wanting to work for me

[@madebychikar7651]

Mykey is definitely a hassle. A set mines up by mistake. How can you set it up with 1 key but you need 2 keys to reset it 🤦🏾‍♂️

[@chynyacarroll4240]

How did you get it off I’m struggling

[@madebychikar7651]

@@chynyacarroll4240 I had to buy a key fob online for like $70. Then I took it to the dealership to let them set it up for $90.

[@ryannicole4396]

We’ve tried this 5 times on my 2014 Ford Explorer and it will not work. I have been able to simply bypass the mykey volume limit, by cranking my car then taking my key fob back inside coming back out and cutting my car off then back on, but I don’t want to have to do this every single time I drive somewhere. We’ve cleared the codes and gone by this video step by step. Is there anything else I can try?

[@madebychikar7651]

@@ryannicole4396 a locksmith can probably hack into the system but it’s not 100% reliable best thing to do is buy a cheap key fob online and get someone to set it up

[@michaelstarr7946]

I’m have some issues with my 2015 escape titanium. Am following the steps but am not having any luck!

[@hellraizer50]

I'm not sure if the escape would work the same. Sorry it's not working for you.

[@micahcarpenter8241]

You sir, are a hero

[@hellraizer50]

Thank you, I'm glad it worked for you. 😁

[@EddieMc-lr2ec]

Jason can you help me with MyKey issue on my Mustang

[@hellraizer50]

@@EddieMc-lr2ec I can try. What is your issue ?

[@rafaelmartinsdebairros3346]

Pode ser feito pelo forscan ? Como seria?

[@hellraizer50]

Unfortunately I have no idea what your comment says. If anyone can translate it, I would appreciate it.

[@rafaelmartinsdebairros3346]

Can the procedure you did of taking the key away from the car and everything else be done with the help of the forscan program instead of your video scanner?

[@hellraizer50]

@@rafaelmartinsdebairros3346 Thank you.

[@hellraizer50]

The step where the key gets taken away is necessary so the car does not sense it. I'm not familiar with ForScan, I don't know if you can use that to reset the cases or not.. If you are using ForScan, you may be able to go in and disable the MY KEY settings without all the other steps

[@rafaelmartinsdebairros3346]

@@hellraizer50 In this case, you use your scanner to only read the DTCs and then delete them, is it only used for this in this process? sorry if the translation is wrong. I am from Brazil.

[@darenasher9775]

I tried it over and over on my 2011 Edge and couldn't bring up the menu to turn MyKey off. I have bought extra remotes from Ebay and Amazon thinking I will have to use Forscan to clean all keys them program new. But you need two remotes and if there not right your screwed. A idea how I can tell if the ones I purchased are the right ones or not??

[@hellraizer50]

Sorry this did not work for your Edge. As far as the remotes are concerned, they should have a FFC ID number. If they are the same as the remote you have, then they will work. Hope that helps.

[@seanolsson1226]

How do you erase codes while the engine is running????

[@hellraizer50]

The same way you would if it is not running. Just select the clear codes option on your scan tool.

[@stevocumberlandd5960]

Don’t know if I’m doing something wrong or what I cleared my check engine dtc codes and it beeps and everything still not working

[@hellraizer50]

I don't know what vehicle you have, but I know this works on a 2014 Fusion with push button and remote start. 🤷

[@stevocumberlandd5960]

@@hellraizer50 2013 ford fusion titanium model I got a ht300 code reader I cleared the codes with it it didn’t really show just dtc codes

[@hellraizer50]

@@stevocumberlandd5960 it should work on the 2013. Some people have said they had to reset the codes twice in a row, but I don't know if that will work for you or not. Wish I could be more help.

[@LuisRodriguez-gu8eb]

Fusión 2013 2.0 titanium With Forscan… No works I already tried deleting the codes more than once but the board does not restart like with your scanner

[@ambynambyn5710]

Hi, I have watched your video several times and tried with my own OBD code scanner. It's not working for me. I have lincoln MKX push button starter. Please, help me. Thanks.

[@hellraizer50]

I'm sorry it didn't work for you. The MKX must be different. I will try and figure out how to reset the mykey for the MKX. If I can find any info, I'll let you know.

[@ambynambyn5710]

@@hellraizer50 Thanks for the express response 👍

[@tannible_lector]

Tried dozens of times and gave up. Nothing worked. Tried 2 different code readers to clear the codes but they never would reset my cluster like yours did. Even tried clearing the codes multiples times on some attempts. Nothing would reset the dash. I drive a 2013 Lincoln mkz (basically a ford fusion) if anyone has any more advice

[@rickayahooable]

Dude you are awesome it worked perfectly. I just so happen to of already had the sct tuner. Thanks so much!!

[@hellraizer50]

I'm happy to hear that it helped you out! 🙂 You're welcome!

[@codywaters4565]

Can confirm this works on 15-17 Mustang GT (manual) as well, however the metal key isn’t needed.

[@hellraizer50]

There is someone with a 2015 mustang that tried and it worked. Scroll through the comments and you should find it . 👍🏻

[@codywaters4565]

@@hellraizer50 I didn’t have anybody to walk away with the key so I just threw it out the window & it worked😂

[@josueberrios0514]

Can I do this on ford explorer 2014?

[@FLYAWAYDSB]

do I need a sct scanner or any obd2 will do the job? thank you so much

[@hellraizer50]

Any scanner that will clear codes will work. 👍🏻

[@khyron96]

can you do this without a tool to clear the codes?

[@hellraizer50]

This will not work without resetting the codes. So to answer your question, no, you can't do this without a tool .

[@angelmata1504]

Would it be the same method for a 2016 mustang gt? I accidentally enabled mykey but only have 1 key

[@hellraizer50]

It should work. A person by the name of Drew did it to his 2015 mustang. Read his comment and try it. I hope it works for you.

[@angelmata1504]

@@hellraizer50 I tried the same exact steps and I did get to the restart screen but when I went to settings on mykey it wouldn’t give me the option to clear my key

[@hellraizer50]

Read through the comments, there is a guy named Carlos who had a 2016 mustang, it didn't work for him. He had to get a Bluetooth scanner, and download the Ford app for him to be able to reset his mykey.

[@markniblett4483]

Can you help me I am trying to clear the my key on a 2017 lincon and the want about 500 dollars for a second key to clear it

[@hellraizer50]

@@markniblett4483 I don't know the steps to clear the MyKey on a 2017 Lincoln. All I can suggest is trying this procedure that works for the 2014 Fusion. Sorry I can't be more helpful

[@elguero7185]

Thanks so much finally something that worked! Thank you so much!

[@hellraizer50]

You are welcome. I'm happy it helped.

[@elguero7185]

Fyi it worked on my 2017 f150 lariat! Bought with one key 2 years ago n finally deleted mykey 😆

[@hellraizer50]

@@elguero7185 that is good to know. I'm glad it worked for you.

[@FLYAWAYDSB]

it won't give me nothing after I cleared the codes....

[@GarayAshirov]

Hi, I have one key and there isn't start button in my car. How i must do😑

[@hellraizer50]

I don't know how to get it to work in your situation. I have had luck with a 2010 Taurus, by wrapping the key in aluminum foil and turn the ignition on, the key was not recognized as a "My Key" and it let me reset all MY KEYS. Good luck.

[@dayronsanchez6952]

I cant do it without the scanner? I have only one key and no scanner that can erase the check engine light and i have the limited volume

[@hellraizer50]

I believe you need the scanner or any reset tool, so you can reset the dash. You do not have to use the exact scanner that I used.

[@muhammed_mursakulov]

İ cant understand which program you used

[@hellraizer50]

I did not use a program. I used a SCT 4 programmer, but only used it as a code reader so I could reset codes. By resetting the codes / check engine light, it resets the cluster.

[@luismartinez3227]

Hello, I have that problem but mine is a Ford Explorer 2011

[@hellraizer50]

I don't know if the process is the same for the 2011 explorer. Sorry this didn't work for you.

[@juanisboss6872]

I have a 2017 Ford explore and it’s not working for me

[@hellraizer50]

I'm not familiar with the process for the explorer. Do you have a fob and push button start? Or do you have a keyed ignition?

[@juanisboss6872]

@@hellraizer50 I have a push to start

[@brennanmendez6288]

I’m having this same issue! I’m just not sure where to get the scanner to clear the codes? What is this and where do you get it?

[@hellraizer50]

The machine I used is a SCT X4 , it is a performance programmer. They sell them on the SCT website. You can also go to your local parts store and pick up a cheaper code reader. All you have to do with it is reset the codes.

[@lcarlosmoreno6436]

@@hellraizer50 so obd2 scanner doesn't work?

[@hellraizer50]

The OBD2 scanner should work as long as it can clear the codes.

[@traviswilliams6882]

I have a 2016 Mustang That has my key active and I went through the steps to try to get it off eyeball a blue drive off of Amazon erase the codes but it still pops up

[@hellraizer50]

I'd message Drew from the comments. He had it work for his 2015 mustang. There may be something different to do.? 🤷

[@JESSEPAVON]

Hello, i have remote start on my 2013 f150 but not a push start button. How do i clear this. Ya lease help.

[@phoebe9102]

Hi, would this disable all the restrictions (80mph, radio volume, seatbelt, etc.) or just the pop-up notifications?

[@hellraizer50]

All this does is reset the My Key, if you only have one key.

[@phoebe9102]

I cant even remote start my car from the inside. 😣

[@hellraizer50]

Check that the battery is good, and if that does not work, You may have to go to a dealer and have them reprogram the key.

[@phoebe9102]

Thanks! I will try everything, anything before I let the dealership people rob me. 😄

[@N54steelo]

Thanks so much man it works 💯

[@hellraizer50]

You're welcome, I'm glad it helped you out.

[@chrisfredricklinkous]

Not that this will get a response, on a 3 year old video, but does anyone know if autozone would have that kind of tool?

[@hellraizer50]

AutoZone should have a code reader that will reset the codes. It does not have to be the same exact tool that I used. 👍🏻

[@chrisfredricklinkous]

Just tried this to no success. How far back does the 2nd person have to be?

[@hellraizer50]

@@chrisfredricklinkous far enough that the car won't recognize it

[@johndough7585]

Does it work without a srt scanner because I tried this with a regular scanner and it didn’t work can you please help ?

[@hellraizer50]

It should work, all the scanner does is reset the check engine light / clear codes. Even if there are no codes showing, just use the scanner to reset them, that will reset the cluster.

[@tannible_lector]

@@hellraizer50tried 2 different scanners and they never reset the cluster. They cleared an O2 sensor code but no dash reset or anything like you got

[@hellraizer50]

@@tannible_lector what scanners are you using? I have the SCT like in the video, and a Snap on, they both make the cluster blink when resetting codes. 🤷

[@carlosmanzano8965]

do you know any other cheaper recommendations instead of that code reader you have since its 400. 😬 \

[@hellraizer50]

Any code reader will work, as long as it will reset the codes.

[@carlosmanzano8965]

@@hellraizer50 thanks, I got an FORScan OBD2 hopefully that works

[@LuisRodriguez-gu8eb]

@@carlosmanzano8965it works with Forscan?

[@casillaswilmer]

I got a konnwei support all obd2 protocols bt3.0 for android. I trying to clear mykey also and I just want to get the right app to clear the codes.

[@DaddyRC5]

I have a obd 2 that can send clear command. And my dash never clicks or resets. The temperature goes to -39 but it doesn’t work. I have 2014 fusion titanium

[@hellraizer50]

The vehicle that I did this on is a 2014 Fusion Titanium also. It should work, it has always worked for me when following the steps.

[@tannible_lector]

@@hellraizer50have the Lincoln version of the same car. Never worked for me either. Used 2 different code readers to try clearing the codes and my dash would never click or reset either

[@hellraizer50]

@@tannible_lector maybe it does not work for the Lincoln. 🤷

[@abdullanjr]

the my key setting do not show up after I take the key out of the can and restart it, do you know what I might be doing wrong?

[@hellraizer50]

I'm not sure, All I can suggest is watch the video step by step and duplicate what I did. Hope that helps.

[@calebmendoza9996]

I’m having the same issue, I bought the device just so that it can clear the code but my key doesn’t show up... I’ve been following the steps by steps for about 6 attempts already

[@hellraizer50]

@@calebmendoza9996 sorry, I can not tell what the issue is without seeing step by step what you are doing. I wish I could be more help.

[@RajveerSingh-qy4ch]

Does it. work for ford mustang 2016. I have only 1 key with remote start.

[@hellraizer50]

I'm not sure if it works on the mustang, I can only suggest you try it step by step and see if it works. Sorry I'm not much more help.

[@basselmouchantat7273]

@Rajveer my mustang 2015 having the issue did u find away to reset mike without dealership service

[@RajveerSingh-qy4ch]

@@basselmouchantat7273 you need a code scanner. I watched another video in which a guy used code scanner called elm obd2 and it worked for me. You can buy it from Amazon its only $30-40.

[@hellraizer50]

Yes, a code scanner is necessary. In the video I used my SCT4 programmer. It works as a scanner also.

[@basselmouchantat7273]

@@RajveerSingh-qy4ch Thanks bro will try it

[@joesan2488]

Wait so could I get my codes reset at an auto shop store?

[@hellraizer50]

You can. 👍🏻

[@mejiaclaudia3]

someone stole my spare key, I need to reset it and get new codes, how I do that?

[@hellraizer50]

That would need to be done at your local dealership.

[@NsHIESTY864]

I have 1 key and set up and cleared with 1 key but now I’m struggling to do it again

[@hellraizer50]

I hope this helps. 👍🏻

[@angelcenteno1557]

Where do you put the key?

[@hellraizer50]

I'm not sure I understand what you mean. I don't put the key anywhere, I have the FOB with a push button start. Please be more specific so I can answer your question. Thanks

[@charliegoetia9765]

​@@hellraizer50you said you put the key in a slot Which slot?

[@hellraizer50]

@@charliegoetia9765 the slot is in the center console. It's the same place you put the key fob when programming it to the car. I only use the slot in the video to make my fob a "my key" for the steps to remove the my key setting with only one fob.

[@robertoarellano1993]

So when I go to clear the code, my scanner tells me there are no codes to clear. And I proceed with the step but it doesn’t reset the MyKey

[@hellraizer50]

When you clear the codes it will reset the cluster, you can see mine flicker when I clear the codes. After the dash is reset, you should be able to scroll through the settings and erase the mykey setting from the menu.

[@jaselmaldonado7629]

No working for mine 🤯 don’t have a stc

[@mrdman094081]

Tanx. They made it way more complicated than it needed to be.

[@hellraizer50]

You're welcome. 😁

[@nicholasbrooks2968]

Imma try this, I hope this works

[@alyssagrant4376]

will this work with lincoln as well?

[@hellraizer50]

It may work. I have never tried it on a Lincoln. The best thing I can tell you is to try it. Good luck. 👍🏻

[@montemayor2717]

Autel MS309 will this one work for it?

[@hellraizer50]

I'm not familiar with that scan tool, If it will clear codes, then it should work.

[@cynthiatenorio7076]

Hello it didn’t work for my first fusion 2016 help please!😢

[@hellraizer50]

Sorry you are having no luck. If you have remote start, and push button start, it should work. Try it more than once, follow all the steps. It may not work the first time. I hope this helps.

[@ezydubs437]

helped on my 2016 gt

[@5.0mike33]

Does this work with a mustang GT

[@hellraizer50]

It might, someone in the comments had it work on their 2015 Mustang.

[@randycardona9756]

Can this be done with a FIXD

[@hellraizer50]

I don't know what a FIXD is. 🤷

[@shagahoe3793]

I have 2014 lincoln mkz followed all steps. My key still active. I've been trying everything. I can't afford to give a dealer 400 bucks...

[@hellraizer50]

Sorry it isn't working for the Lincoln. Maybe look into Forscan and see if that is able to help?

[@williamcoleman7081]

I have a 2013 ford max hybrid… if anyone knows a way to fix the mykey issue i would really appreciate the help

[@SuperchargedJT]

Bro i don’t have any codes , & instead of sct i have an Nguage

[@hellraizer50]

You should be able to clear codes even though there are no active codes. The scan tool you have should work, it does not have to be a SCT.

[@LeFrenchiee]

I have a 2016 Ford Fusion Titanium. Didn’t work for me. 😥

[@byrondavis1700]

Do you know if this works on the 2012?

[@hellraizer50]

I don't believe so. The 2012 is the older body style. What does your key look like?

[@fritzlove2834]

Do yiu need this other tool ?

[@hellraizer50]

You need a tool that will reset the engine codes. It does not have to be the SCT4 tool like I used.

[@hermanasencristojesus6556]

Interested i have for fusión 2016

[@jeffreydollar]

Bro I am having hell!! I cannot get past this me you it will not allow me to go to my key settings. I’ve been trying to do this for a month. Now

[@hellraizer50]

What is the year make and model of your car? Does it have remote start? Does it have a push button ignition?

[@natemartin2579]

2020 fusion??

[@hellraizer50]

I'm not sure if it will work on a 2020 Fusion. 🤷

[@jeromebullock467]

It’s not working for my Ford Edge I have a cheap code scanner

[@hellraizer50]

Sorry it didn't work out for you. I never tried it on a Ford Edge.

[@bevis1528]

Like ma y have stated this absolutely doesnt work. You never expkain where the code is when scanning which I did and nothing shows up thus this doesnt work.

[@Khaled-if4xs]

I didn't find erase All key And create key, how I erase this massage [ my key active drive safely] now,

[@hellraizer50]

What is the year, make, and model of your vehicle. Some steps may be different. Look in the comments and see what worked with everyone else.

[@pinkk8206]

I tried that but nothing works for my 2017 fusion

[@rachellbrown1283]

What was your final outdone? Did you have to buy a key?

[@rachellbrown1283]

Outcome**

[@JESSEPAVON]

Mine don’t have push start button, but it does have remote start

[@chrispearce2122]

Sorry but it won't work unless it's a push start.

[@hazellust7995]

What is the name of that machine

[@hellraizer50]

The tuner that I have that resets the codes is called a SCT X4.

[@javierbustillos1574]

@@hellraizer50 would any scanner work?

[@jorgeescobar6372]

When I close the door and got to turn it on it keeps saying my key detected? Any one else have this problem...BTW I'm using a modus ultra scanner for this

[@hellraizer50]

I don't know what vehicle you have, but seems like the key has to further away from the vehicle. Hope this helps.

[@jorgeescobar6372]

It's a 2015 ford fusion eco boost titanium... could it be that I'm using the wrapped in aluminum foil trick? I don't have someone to help at the moment. I'll try tomorrow once wife is home

[@hellraizer50]

@@jorgeescobar6372 I tried the aluminum foil trick and it didn't work for me, so I bet that is the reason why it is not working for you. You have a good plan to wait for a little help, I hope it works better once you have someone help you.

[@isiahcodding8948]

Hello I’m hoping you’re able to help, but every time I click clear codes on my scanner it’s giving me an error that there’s no codes to clear. Am I just out of luck at this point?

[@hellraizer50]

I don't know what scanner you're using. The scanner I used will reset the codes even if there is none showing. I would try to use a different scanner or if worse comes to worse, unplug a spark plug wire so you get a check engine light then put the plug wire back on and then do all the steps and clear the codes. I hope this helps.

[@jasoncampbell7249]

I can't get my remote start to even work

[@hellraizer50]

Check the batteries in the FOB. Other than that you'll have to get that working before attempting this.

[@jasoncampbell7249]

They seem to be good. I can roll my windows up and down outside the car. The trunk button works also. When I try the remote start my horn blows and my fob flashes red 2 times

[@hellraizer50]

@@jasoncampbell7249 Is the check engine light on? I know that if it is on, then the remote start will not work. If it is not on, then I don't know what could be wrong.

[@jasoncampbell7249]

Yes

[@jasoncampbell7249]

It's got something to do with the boost? My buddy hooked it up to his computer to see what it was.

[@ibrahimkhattab1695]

I need help

[@hellraizer50]

Sorry you are having issues, but I can not begin to help without more details. 🤷

[@lcarlosmoreno6436]

Not working for my 16 mustang, I only have 1 key and accidently set that my key bull crap 😁

[@hellraizer50]

I don't know if it will work, but, you can try wrapping the key with aluminum foil, then put the key in the ignition and turn it on. It may not recognize the mykey but let you access the option to remove all mykeys. That worked on a 2010 Taurus, it may work for you, I don't know.

[@lcarlosmoreno6436]

@@hellraizer50 mine is push start, as soon as I do all your steps and my kid walks away.. I restart car with no key and I still get the my key on while car is started with no key and key is 20 feet away.

[@hellraizer50]

The Mustang may be different than the Fusion I was in. :(

[@hellraizer50]

Someone else in the comments has a 2016 Mustang and seemed to get it to work. Maybe reach out to him and see what they did.

[@lcarlosmoreno6436]

@@hellraizer50 just did it lol, need the ford app and a wireless Bluetooth scanner to be able to clear key and make it into the admin key

[@cristianbrizuela3812]

Subtitulado por favor !!!

[@mirandavalenzuela4597]

Can you use any kind of tuner for this?

[@hellraizer50]

Yes, as long as it will reset engine codes.

[@amayaprice1011]

Doesn’t work for f150

[@hellraizer50]

I never tried it for the F150, I have a 2014 Fusion Titanium that I did it with in the video.

[@SuperchargedJT]

Doesn’t work mannn 💔💔💔💔💔💔💔

[@goldenglove25]

This doesn't work

[@hellraizer50]

Sorry it didn't work for you or your vehicle application. 🤷. Many others have gotten it to work on their fusion and other models of vehicles. Let me know if I can help.

[@GRB99-f9v]

I need help men

[@hellraizer50]

What seems to be the problem?

[@TheSL1992]

Doesn’t work.

[@hellraizer50]

You can clearly see in the video, it does work. 🤷

[@TonioGivens]

Hey

[@hellraizer50]

Hello

[@danielmauricioalvarezalzat7119]

Hey, i need help for my ford fiesta titanium 2015. does it works???@@hellraizer50

[@TrentonTompkins]

I'll never buy another Lincoln! Dumbest crap I've ever seen, it doesn't even warn you or tell you what a my key is before it lets you break your car buy just clicking buttons in the menu. I bought this car used with only one key. they should call it a restricted key or a limited key, where something that you do what it meant.

[@juanixta277]

what a joke didn’t work for me

[@hellraizer50]

Sorry it didn't work for you. Just know all vehicles are different. This does work on a 2014 Ford fusion titanium, with remote start, amongst others. I don't know what vehicle you are trying this on. 🤷

[@jenniferhamm4783]

I don't have an option for mykey

[@hellraizer50]

I would guess that you don't have a mykey programmed. I don't know what your vehicle is? It may not be mykey capable? 🤷