Resin Art Clock

[@FXDynaRider]

If I may suggest, next time you want to align the numbers use a laser level on a tripod. Then you will have a contact free line of reference to insure proper placement.

[@barbarahastings6285]

Did I happen to miss where are you explained how you got the numbers so evenly distributed. I can’t imagine just eyeballing it

[@vanessajfoxx]

He will gurl it’s gorgeous 😘❤️ he’s your dad he love you and whatever you gift him ❤️❤️

[@stevecady421]

Great video. Love that color combination with the gold. I'm inspired to make one myself now! Thanks for sharing!

[@bigsabertoothbunny5986]

My recommendation: once it sits for those 2 hours and reached the tacky point, move the clock base to another board. On that board have the 12 lines drawn out for the clock numbers so that you only have to line them up based on those line rather than eyeballing it solely. Beautiful piece, well done overall. Epoxy is a wonderful material to work with if used properly because of its versatility of uses and endless color options.

[@Decopainterandtea]

I was wondering how to do that accuratly. Great suggestion.

[@hmdftm8047]

Good brain and good hands...have a good times .

[@clayfeathers]

Beautiful again! ❤️👍🥰 Also the music is so soothing!

[@DebraSmithArt]

Thank you Rebecca!

[@mokhtartighenit6842]

Vous.ete.magnifique

[@amethyst1826]

Great video. I love the clock. Hint - when putting in batteries, put in the nobbly end first, then the other end should just slip in with a gentle push.

[@havefun357]

kzbin.info/www/bejne/bGrFnWyghq5qeZI

[@cecilebarker7782]

What size of wood disk did you use please? I love the end result! Beautiful! Also, how did you remove the resin that was under the tape?

[@kenretherford3519]

Hi Debra, that looks wonderful. The colors go together perfectly. If I might lend a bit of friendly advice, use tweezers to set the numbers so you're not relying on dropping them in the right spot. Again, great work!

[@DebraSmithArt]

Thanks Ken! I'm give that a try!

[@imanhussein4177]

I love the clock and the music as well..thank you 👍👍

[@busterwest1644]

Have a clock face blank and mechanism, was just waiting for thr right inspiration.. Found It !! Beautiful work..

[@saidielhadj6255]

😋

[@owohgeorge2474]

Masterpiece. Many thanks for sharing your talent.

[@Dragonfly5455]

I made this same clock with an old LP for my son. It was awesome

[@DebraSmithArt]

That's awesome!

[@CookingGuy815]

Debra Smith Art very good, I like this video, thank you for sharing

[@chumaelawshoaib6812]

Very beautiful artwork. Can you please guide what else can i use instead of wood as a base. Is there any alternative for that?

[@karaprice1338]

What size wood disk did you use? This is lovely, thanks for sharing.

[@barbarahastings6285]

Very beautiful love the colors

[@nihatbalc3839]

Hello i liked your skills. But because the Light has blendet the paints i couldnt read whats written on them. Can you please teli me the names of them 😊?

[@nirateller5603]

Very beautiful. Thank you

[@usherl250]

Great clock, very elegant

[@DebraSmithArt]

Thanks, Laura!

[@karlclarkeable]

Great job nice project

[@DavidM-8282]

is there a template you can use for the clock numbers so they are evenly spaced ?????????????

[@georgialynnalvarez4630]

I thought that was absolutely beautiful.you did a wonderful job...😁😁

[@DebraSmithArt]

Thank you!

[@meduza65]

I haven't done a resin pour yet, but watch many videos on it. Would it be possible to add the numbers right after the pour and when you have more control over number placement and the resin is more forgiving? Or during the sticky period, forcing the move and maybe do another layer of clear resin over the top, once all the numbers are right? Love your work.

[@DebraSmithArt]

You can certainly add the numbers right after the pour. I find that sometimes they move when placed that early because the resin is still fluid and moving. I could also wait until it's cured and add the numbers and then a clear coat. Thanks for watching!

[@drocktheallmightyone]

Beautiful and inspiring. Thank you so much for sharing this video. 🎨💜🔥

[@arthurcohen9390]

Very nice, only one small problem. The battery part should be on the wood. That way it would be easier to hang. Instead of the back sticking out so much. Otherwise nicely done

[@shairamaliha5495]

how did you hang it on the wall? did you make any hole in the back?

[@dresinart3206]

awesome idea

[@ellencorcoran4054]

I really liked your tutorial. I have checked the Michael's website and am unable to find your clock base. Could you tell me the diameter and thickness of the wood? Thank you.

[@simeonadeagbo9398]

Please ma'am do I need an extra class to do this beautiful work.

[@lorelical]

Lovely clock

[@DebraSmithArt]

Thank you!

[@kellybrus8663]

That's beautiful

[@robertantunez9070]

Fantástico..., Saludos desde Montevideo Uruguay...

[@ناصرمحمد-ط4ح]

كان يجب عليك وصع كل الشوك نحو الساعة ١٢ وبعد تركيب البطارية العمل علي ضبط الزمن .. العمل جميل وفيه ابداع ❤️❤️🌷

[@lintangpriyanto1222]

Good idea... Very inspiring...

[@krishnaR-mq4ov]

Nice , How do you place the numbers without measurement

[@gayathrirajesh6952]

Very beautiful. May I know the material of the numbers that you have used. Is it wood or anything else ?

[@artistry_ami]

How u have sticked those numbers?

[@eiphyuthwe60]

Beautiful work! I love it 😍

[@havefun357]

kzbin.info/www/bejne/bGrFnWyghq5qeZI

[@anaya4472]

Resin did not get inside clock centre hole?

[@margaretperry2015]

How did you measure to be sure the numbers were accurately placed?

[@hib32]

She didn't. She went by eye.

[@mujhadmohamed8270]

Good work

[@franpost9800]

where do you buy the the clock hands and mechanism

[@amethyst1826]

You can buy them on eBay & Amazon.

[@Grumpycat0405]

Beautiful, where did you get the numbers?

[@shevchenkoshevchenk1]

looks awsome i like it so much

[@franpost9800]

I just saw your answer below. Can you do it without resin? And just acrylic paint? Thank you I love it

[@DebraSmithArt]

I'm sure you can. That would be cool!

[@sutela2060]

Very beautiful,, ❤️🙏

[@ceylonuk6250]

Good Luck Sri lanka 🌺👍

[@Msjangel1973]

So beautiful thank you.

[@abderrahmenebensalah641]

Very cool artwork ❤️😍

[@donaldsherbondy1950]

Beautiful work, do you have a mixing video showing your recipe.

[@williamw7583]

Maybe 11 is your lucky number, pick it if you play a lottery ;-) Amazing clock by the way. thanks for the tutorial. Gonna try to make one for my mother

[@DebraSmithArt]

Thanks! I'd love to see your final product!

[@williamw7583]

going to try to make one in the spring. I will post a video of the finished product when I am done and I'll shoot you a message so you can check it out. hope mine comes out at least half as good as yours did. I soooo know i am going to screw up placing the numbers though...lol

[@DebraSmithArt]

@@williamw7583 As you can tell, numbers are my problem as well. Recently I bought a protractor and now I can measure and place them correctly.

[@amethyst1826]

@William W, draw around a clock onto paper wider than it, & the one you're making, & mark where the numbers are. Place the one you're making over the drawing, & use for the template for the numbers. That seems to be the easiest way to me.

[@anthony7949]

What diameter is the watch? And what material is the base of the watch?

[@jnovati3952]

This is excellent work. But I don't understand well how do you make sparkling to looks brilliant as gold

[@johns3196]

Of course he will love that clock hes your dad

[@jillytiffen6305]

Wish I’d seen this video before I’d started my clocks! Great informative video! 👌

[@DebraSmithArt]

I'm glad you enjoyed it. Thanks for watching.

[@CarolynDenison]

Very Pretty. I may have to try this.

[@ladonnadavis8710]

What kind of epoxy do you use that's easily blown around like that? When I put my epoxy down and I tried to move it with a blow dryer or heat gun it does not move that easily. You must have some strong lungs or I'm doing something wrong

[@liudmylay5129]

please tell me how many grams of resin were spent on the work?!!😊

[@pahadipihu1205]

What is the base made up of?

[@rawanabdu5321]

Whish color do u use?

[@charunoni3023]

Are those numbers made of resin too?

[@komalpuruswani7563]

From where u brought these numbers???

[@Jurraqueando]

Muy bonito trabajo, te a quedado fenomenal, un saludo

[@Amanda-qh4dm]

Beautiful work. Love all your videos

[@DebraSmithArt]

Thanks!

[@lilycessna3077]

Beautiful! Where did you get the numbers for the clock? Thank you...

[@jeannecravens628]

You can purchase numbers at any craft store.

[@lilycessna3077]

Jeanne Cravens thank u!

[@janebeatty6691]

Do use any protection when using resin? For fumes?

[@nagibali4322]

so beautiful

[@DarkestLight998]

Why didnt you measure where the numbers were placed? Also. You should try placing the numbera with a twezer. The face looks kind of smudgy. Excellent work none the less

[@tridiawigley760]

Where can I purchase the numbers? Nice artwork

[@normbarrieau9708]

What a great design I

[@DebraSmithArt]

Thanks!

[@lakshmiteja2760]

Where you get numbers for clock

[@bun-bun5610]

Pretty cool. Thanks for sharing

[@anking8373]

Hi Debra, How much temperature heatgun u use, Thanks.

[@zezezeze5724]

Hi thanks for the lovely tutorial What is the base of clock made of ?

[@DebraSmithArt]

It's a wooden round from Michael's Craft Store

[@Krim410]

Why did u use both the torch gun and heat gun

[@Ryan-wy9rk]

Very nice work.good luck

[@sutela2060]

Is it a special tape you are using on the back or can I use the same on my canvas for pouring

[@matthewcirola286]

it's masking tape. it will work for resin and regular paint

[@jonatangross3756]

Loresina y pigmentos o con acrílicos?

[@ing.victormanuelhonoratoan5510]

Beautiful job Debra!!!, Congratulations!!!, from México, City.

[@Sherinyazid]

Beautiful work! 👏🏻 thank you so much for sharing this with us. Please tell me where I can get the clock base, numbers and movement. And what material is the clock base?

[@DebraSmithArt]

I purchased the base, numbers and hands at Michaels Craft Store

[@havefun357]

kzbin.info/www/bejne/bGrFnWyghq5qeZI

[@ramwiebe]

Love your video! If you don’t mind saying, where did you get you clock mechanism and what size did you get...the spacing and hand length. Thanks so much!

[@DebraSmithArt]

The clock mechanism is from Michaels. It's Art Minds brand, 3/4 inch.

[@busterwest1644]

Not sure where you are but in the UK Hobbycraft sell MDF circle with predrilled hole for £1 and clock mechanism for £2..

[@dmw1306]

Very nice ❤

[@rafizebua1253]

Nice... I like it 😊😉

[@gloria.vidalcorrea826]

Espectacular . Por favor podría decirme q tipo de pintura puso ???? No sé hablar inglés pero si puedo traducir la escritura gracias

[@DebraSmithArt]

Gracias!

[@SuperCarolyn2009]

Very beautiful

[@saidielhadj6255]

شكرا لكي استاذة على المعلومة تحية من الجزائر لكم

[@witoonroongpunya3241]

what kinds of color that using?

[@jenspen61]

beautiful

[@euniaturnbull3112]

Beautiful

[@ahmetkilic971]

hello perfect work what you used as health, paint to your work?

[@lorimurphy9043]

This is amazing!! Where did you get the numbers?

[@subeghsingh6721]

Mam i am from india , which tape.you used?

[@ساميامين-س5د]

very very nice

[@geetankofficialmusic8785]

So beautiful...

[@jfishman7592]

Very nice!

[@DebraSmithArt]

Thank you!

[@mollymullin3729]

Awesome👏

[@bluebird8102]

I want to learn

[@scaredycat1499]

Gorgeous