RESIN BOOKMARK TUTORIAL | PERSONALISED WITH CRICUT

Learn how to make these Elegant Ombre Resin Bookmarks for the bookworms in your life!
A couple things to note:
- I didn't seal the vinyl because it wasn't needed, however you can definitely seal them.
- The gold paint I used dries super fast (2 seconds!!) Be aware that other brands do not dry that fast and can smudge your finish. If needed, seal paint with sealer.
- Bookmarks should cure hard and not bend. If there is a bend, consider starting again and make sure your 1:1 ratio is as close as possible.
❤️ Leave some love & subscribe → bit.ly/2UFcZef
Hit the bell icon so you don't miss any of my new videos! 💕
*********************************************
Some links below may be affiliate links.
VISIT WEBSITE:
Shop → diycrafttutori...
DESIGNS USED IN THIS VIDEO:
Bookmark Sleeve/Holder SVG file → bit.ly/364QIv4
FONT:
www.tkqlhce.co...
PRODUCTS USED/MENTIONED IN VIDEO:
Cricut Joy → cricut.pxf.io/...
Tools + Accessories → cricut.pxf.io/...
Vinyl Transfer Tape → cricut.pxf.io/...
Cricut Joy Mats → cricut.pxf.io/...
Chrome Gold Vinyl → amzn.to/3qH5BhD
Gold Paint Pen → amzn.to/3UuEJiD
Bookmark molds → amzn.to/3SgcqCx
Epoxy Resin → amzn.to/3qQBcx6
Silicone mat → amzn.to/3Bqd5dO
Square Silicone mat → amzn.to/3LkkbVN
Mica Powders → amzn.to/3DBapwu
Gold Tassels → amzn.to/3Du50Ht
Plastic Cups → amzn.to/3BqdywA
Gold Flakes → amzn.to/3DtbNkR
Nitrile Gloves → amzn.to/3RQnh6j
Respirator Mask (please DO NOT purchase a cheap mask! You need a full face mask with chemical filter for resin)
Respirator → amzn.to/3S5YHOk
Cartridge → amzn.to/3dlI16V
Filter → amzn.to/3BfJYK4
SHOP SUPPLIES:
💙 Shop Craft Vinyl → bit.ly/3POZVQi
💜 Shop my Amazon Favs → www.amazon.com...
💚 Shop Cricut → cricut.pxf.io/...
Cricut Machines → cricut.pxf.io/...
Tools + Accessories → cricut.pxf.io/...
Materials → cricut.pxf.io/...
Basic Tools Set→ cricut.pxf.io/...
Weeding Tools → cricut.pxf.io/...
Cricut Heat Presses → cricut.pxf.io/...
Join Cricut Access → cricut.pxf.io/...
FAVOURITE WEBSITES FOR COMMERCIAL USE FONTS AND GRAPHICS:
Creative Fabrica → bit.ly/3tTp0jZ
Font Bundles → bit.ly/3UvIKDo
Design Bundles → bit.ly/3DLeg7g
SoFontsy → bit.ly/3AG7rUA
Creative Market → bit.ly/3qULWLi
CONNECT WITH ME:
Website → diycrafttutori...
Instagram → bit.ly/2U5JSjQ
Facebook → bit.ly/2VDjzRM
Pinterest → bit.ly/3dGdhcx
TikTok → bit.ly/3jAWZ8t
My second Channel → bit.ly/3ddrv45
Follow me on Cricut Design Space → bit.ly/3MaWdyw
Join our Private Facebook Group → bit.ly/3DvyaGu
WATCH MORE VIDEOS:
Keychain Tutorials → bit.ly/2JYwqf6
Cricut Tutorials → bit.ly/2W2tKTW
Resin Tutorials → bit.ly/3EF3DEh
Craft Tutorials → bit.ly/3kweWpX
As an Amazon Associate I earn from qualifying purchases.
DISCLAIMER: It is your responsibility to make sure that you familiarize yourself with the consumer product safety guidelines for your country before starting any project. Use products and materials mentioned at your own risk. DIY Craft Tutorials shall not be liable for any direct, incidental, consequential, indirect or punitive damages arising out of access to or use of any content available on this channel.
MUSIC
Tracks included in this video are courtesy of SoundStripe.
© 2021 DIY Craft Tutorials
#cricut #craft #bookmark

[@nita44htc]

They are BEAUTIFUL!! I've never seen resin created that way before.

[@jrdroptini]

These bookmarks are GORGEOUS!

[@eunicec6464]

me before watching: resin is so overrated me after watching: ok imma start working with resin

[@michellemihaylova2432]

Oh my God! What a simple and beautiful package!❤️🤗

[@DIYCraftTutorials]

thank you!

[@bonny9680]

Glad I'm not the only one who finds those black gloves too big :/ Lovely ideas, thank you :D

[@DIYCraftTutorials]

😅 they are hideous but glad they stop chemicals 💕

[@MAY112710]

Wow this video is perfect! It can be a bit tricky for me to learn new things, but you did everything step by step and the list of all the shopping is perfect

[@teresabarhadt1797]

Que producción..! Precioso trabajo.! Te felicito.!💙

[@stephaniemoore3149]

Beautiful ❤

[@Renee_Firebrand]

Those are so pretty!!!!

[@annettesoto2619]

These are so cuteeeeeee

[@zaraslifestyleuk5297]

Wow this is so pretty. I watched full video but can you please tell me one thing? You put the liquid stuff in a mold and I thought you will put the other half of the mold after putting the liquid so you can get a perfect shape. How did you get this perfect rectangular shape? Please clear it to me as I wanna try this at home. Thanks dear

[@vilmahavranova5814]

jeto velmi pekne,idem to vyskusat pekne pozdravujem zo SLOVENSKA. VIKI

[@elenanewkirk7978]

I wish you would have shown how you cut the hole into the bookmarks. What did you use and what does it look like? Thank you.

[@DIYCraftTutorials]

You don’t need to cut a hole in the bookmark, the mold has a section for the hole.

[@sslk107]

Wow I am very impressed. Thanks for sharing. You're fabulous!

[@DIYCraftTutorials]

Thank you!

[@jeepajosh]

Simply stunning

[@shabskitchenanddailylifeuk4456]

That's really beautiful perfect sharing

[@susanjr1202]

Beautiful! I have all the supplies but I doubt I can do this!

[@freearchuleta]

Thank you for sharing your talent & these are amazing!! Did you make the stick-on names yourself? If so, how & why did you use? I’d like to make these bookmarks as well but have never done resin ones

[@DIYCraftTutorials]

Yes, I used a Cricut to cut out the names

[@nilampansare4466]

Excellent....👍😊

[@lovely011772]

Che meraviglia

[@lolitagalas5368]

bonjours félicitation c'est magnifique juste une petite question ou trouver les prénom pour les transferts svp

[@clavedesol042]

Muy bello !!!, te sigo me gustan tus trabajos , ❤

[@Kgallard]

Como haces para sacar el texto tan fácil!! Si utilizo tipografías muy cursivas se rompe al instante o no se queda completa alguna palabra… tienes algún truco?😢🙏🏻

[@nkechiobodo5901]

Nice one sis. Sorry where did you get the stickers and shining marker

[@IniyaTamilvlogs]

Its so cool

[@sehm66]

Soo beautiful! Love them all!

[@aasthajain8611]

They are so beautiful…. From where we can get personalised name slips like you used ?

[@rosselladidomenico5096]

Buongiorno, vi chiedo se è possibile di mettere in Italiano la procedura di questi bellissimi video. Grazie

[@pennychorm1060]

So beautiful.

[@dreamhousejewels158]

Lovely ❤️

[@swathisri940]

Hi I would like to know that the name is written using circuit and it is transferred in transfer Tape before pasting in to bookmark right

[@emilymorin21]

These are so gorgeous! I love bookmarks but haven't really seen anything like these, they are so unique. Did I miss the hole punch for the tassels? Is it in the mold or did you use a tool? Thanks for sharing, this looks fun!

[@DIYCraftTutorials]

Thank you! 💕 the hole is part of the mold.

[@emilymorin21]

DIY Craft Tutorials thank you, that is so cool!

[@sworley1956]

Best ones I seen yet! I would like to ask what setting would you use on the cricut maker in doing the names?

[@DIYCraftTutorials]

Thank you 💕 I use the adhesive foil setting

[@sworley1956]

@@DIYCraftTutorials Thank you what is the dimensions of your name for keychain

[@ayeshatariq9819]

How much epoxy resin do you use for your larger bookmarks

[@JimCarlson-dg2kw]

Thank you Jim’s wife you made it fun and simple Jim’s wife Tara my life is so hard rite now take care of my terminal I’ll husband Jim and I m not well my self this helps some thank Jesus for people who can share their experiences thanks

[@monatheatumanday6050]

I'd like to know what did you use where you put on the resin? Is it some kind of plastic? and the marker u used as well. hope u notice me. Thank you :)

[@sheerinmehendiart5782]

Which printer is this?? Please tell me this..

[@timwatkins4962]

We're these unmolded?

[@nadiamariasamad5120]

Can you please mention the length of the bookmarks?

[@jamiemira100]

Do you seal the top after the vinyl?

[@alaabakkar7770]

May I ask about the printer's type or name, I need to buy one like it

[@monicab28]

I tried making these with the same mica powder, but I used UV resin. I cannot get the end to dry that I used the mica powder in! I have set it under a UV lamp and also in the sun, but it just won't dry. Is it possible to use too much powder? I used a flat little spoonful in the little spoon that they sent with the powder. I'm not sure what to do !

[@samiahyd3388]

Whats the name of that cutter machine

[@nanouchawa5230]

Bonjour, c'est tellement magnifique s'il vous plaît qu'elle est la machine que vous utiliser pour faire l'écriture ??? Je ne trouve pas cela

[@ไออุ่นลูกสาวผอ.อั๋น]

Please tell me about brand your gold color pen?

[@donatelladonnapog1633]

Please Can you tell me the name of the font ?

[@sheriroch9905]

I just can't do the fine writing and transfer it :(

[@telea0199]

Where do you get your resin from? I can't find any good resin to do all my products for my business

[@rosebud4god1234]

What do you use to punch the holes for the tassels?

[@DIYCraftTutorials]

The mould comes with a part for the holes

[@michellejose2333]

What are the sizes of these molds you used please?

[@SDONP]

Hello, my cricut maker can't cut those fonts. help

[@ariakahn]

The smaller ones can be really nice for place cards for weddings.. alittle personalised wedding favours the guests can take home with them.

[@DIYCraftTutorials]

Yes!! Great idea! 💕

[@madabellaboutique8881]

That's a great idea!

[@Cindy-1965]

love this idea!!!

[@syuezahari1770]

Love the idea ❣️

[@mohdshaarif8030]

Same thing I thought 💭😀

[@jamieferguson974]

How cool would these be as keychains!?! Beautiful

[@sandnseaweedart9627]

This is exactly what I needed so I can learn this new craft. Thank you, your work is pretty!

[@jaisriMahakaalmm]

जो आंखें मेरे कमेंट पढ़ रही है उनकी माता- पिता Ko लंबी उम्र दे,और जिंदगी में सारी खुशियां मिले इस साल वह हर चीज उनको mile जो वह चाहते हैं jai Sri Mahakaal🕉🙏🕉🙏🕉🙏🕉🙏🕉🙏

[@morrisdancer11]

I am a bookaphile and have many bookmarks but these are adorable and I want to buy one each for all my family members, whether book readers or not. Then It occurred to me that something like this would be great christmas tree decorations. With or without names I love the idea. Maybe they already exist. I hope so.

[@sarahmaloney1987]

These are so beautiful! And very therapeutic to watch. I’m obsessed with watching resin videos and want to try it out myself. If you wanted to seal the bookmark, how would you go about doing that?

[@JDSNANNY]

The resin is the seal. No need to do any thing else once it dries

[@SSZaris]

If you mean like seal the gold pen paint then you could use a glossy sealer in a spray can, but I'm not sure how that would look on a clear surface like the transparent parts of the bookmark. I use it on models. There's probably something non-toxic out there though made for sealing objects that are meant to be touched a lot. Or, you could resin over it again I suppose.

[@TheNanabanana127]

I’ve been wondering the same thing. I ordered everything I’ll need to make there and I’ve already poured a few without the lettering. I don’t want to let these out of my door without ensuring that the letters were sealed in. I don’t want letters to curl up on the edges, nor do I want the letters to have a texture on the surface. I plan to apply the letters and then follow up by adding a little resin Clear coat on top. This is a beautiful design, great inspiration, thank you!!

[@mrs.rivers8680]

@@JDSNANNY I seal the name on top, I just add a bit of epoxy all on top and let it cure over night

[@kesoonorahood9462]

@@mrs.rivers8680 this is the best suggestion

[@claudianeacsu8077]

Very nicely done! Please Tell me, how did you actually did the rims so you could also see them from above? Because when you normalul color them, like you showed, you barely see them. And then, at the end, totally different look.

[@courtneymorris4549]

I was trying to figure this out too

[@sunshines507]

What setting did you cut that thin font with? I have such a hard time with the thin, elegant fonts like this.

[@sjmckay7]

Are you using the same machine? She’s using a Cricut joy. I notice my Maker and my Joy so cut a little different.

[@sunshines507]

@@sjmckay7 I was using and Air2. But I just got a joy. I'm definitely going to try more intricate cuts with it

[@elaineching9158]

These are the most beautiful bookmarks ever! I just got my resin set in and had to make this my first project. The gold flakes floated up to the top and it the resin cure with gold bits sticking up though :( Did I just use too much? Or am I supposed to sand them down and put another layer of resin on top? Is there a trick to get them to stay down? I'm disappointed at my results but I'm eager to try it again!

[@Ghadeerabbadi]

Mix it within the resin and make sure not to use too much and break it up nicely then they shouldn’t float

[@freeangie11]

I love these bookmarks. How much would be a good price worth to sell them for? Since you have to buy all these materials?

[@lorij7788]

I think that would be something you need to figure out for yourself since everyone's costs are different and how much you want to pay yourself per hour. If you check places like etsy, you can get a general idea of how much people are willing to pay for a personalized product.

[@TimeBombRosette]

ABSOLUTELY BEAUTIFUL, but I wish it had a top coat. Ultra fine letters like that are easily damaged/ come off.

[@nonnidreams]

Yup, surprised, no topcoat, seen others use it for other art detail protection in other projects. Also, thinner, bookmarks that are thick change/damage the spine of books. Like the other comment said, great for wedding favours. But with the topcoat.

[@patriciagleve4784]

What a lovely video - just the right speed and amount of information, even the music was just right. Very therapeutic to watch. I loved your bookmarks - so beautiful - and the attention to detail, making the little card holders at the end. Thank you for sharing.

[@DIYCraftTutorials]

Glad you enjoyed it! 💕

[@katieh200]

Wow love these they are very professional the way you made the cardboard pouches for them, thanks for sharing huni 👍😉💚

[@DIYCraftTutorials]

Thanks so much 💕

[@peacelilly83]

Really beautiful. Where can I find the gold flakes? And typically how long to cure? I’ve been wanting to get into resin and this really inspired me!! (Hubby is gonna freak. Lol)

[@DIYCraftTutorials]

😅 it takes 24 hours to cure but 3-4 days to fully cure/harden. Glad flames are from Amazon, forgot to add the link 😔

[@bori_3079]

After adding the names do you apply another layer of resin? I know you didn’t show in the video but was curious. Do the names peel off easily? I love your videos ❤

[@worminmyapple]

Absolutely Stunning!!! I have 4 jug-sized bottles of that resin/hardener and I'm afraid to use it, but watching this video has pushed me over the edge.

[@DIYCraftTutorials]

Wonderful! Definitely give it a go 💕

[@whitney24100]

i hope you're wearing ppe when doing this

[@himeshsridhar1274]

@@whitney24100 what's ppe ?

[@whitney24100]

@@himeshsridhar1274 personal protective equipment like gloves, a respirator

[@himeshsridhar1274]

@@whitney24100 will a mask we use against Covid 19 be enough

[@crystallove7160]

This is so beautiful! And so relaxing to watch. Thank you :) I was hoping you could share how to seal it afterwards to become waterproof?

[@JaylenWilliamsCaiman.Hunter]

I always seal mine with UV resin. Or, you can use more resin to create a nice seal.

[@dm4859]

That took me back to some nostalgic place of when I was young and would meet my girlfriends downtown in our city, and we would go into stores that had beautiful things like these. That was in the '60s. Thanks for sharing your beautiful work. It's so generous of you.

[@DIYCraftTutorials]

Thank you so much for sharing 💕

[@MileyonDisney]

Just watched this again. It's amazing to me that you could actually weed those names! Good job!

[@boostank1000]

Love your videos. This one especially. How many bookmarks can you make with the 2/2 ratio?

[@sworley1956]

question: I make these all the time and fine that my bookmarks comes out a little bendy. Now mind you, I measured my 2 parts correctly and they sit for about 7 hours. Should they be hard after that amount of time? When you remove your bookmarks have you ever experience any softness or do they ALWAYS come out super hard?

[@TriniRoyQuiReyes]

New friends your work is Beautiful I absolutely love ❤ them Thank you for sharing 👍

[@e.elainefullard2765]

I love these so want to try! Amazing, thank you for sharing ☺️🤗

[@jemmamariex3]

These are beautiful!! May I ask what font you used? It’s been a bit of a struggle looking for a script font that doesn’t break during weeding! Thank you!

[@theycallmechar3341]

These would make beautiful keychains! They turned really pretty!!

[@rashmilakhiani4516]

hi can you plz tell me what paper you used for writing....plz do rely how to do writing on resin

[@asmahkami6340]

مرحبا انا عندي جهاز كريكت جوي ابغى اعرف كيف اقص نفس الخط بدون تقطيع ايش اغير بالاعدادات

[@DroitMaritimeDZ]

How many bookmarks can 1 kg approximately get me

[@DIYCraftTutorials]

Depends on how much resin your bookmark moulds need.

[@JDSNANNY]

I have this same mold I have tried about 8 times now to get one to just be even all around with resin it doesn’t matter if if level it out 100% on a 100% level surface it always comes out larger and thicker on one end than the other . Can you help me and tell me what I am doing wrong ? Thank you !

[@ForGodsolove]

Huge question😳, HOW do you weed with that foil vinyl sooo.. easy 😂😂? No really! I’m newish with my Cricut and I’m picky about the handwriting fonts as is, let alone trying to weed the font, like how …please💞💞💞share?

[@JYOTIVERMA-rz8uq]

My tution mam is also making these think

[@manshi876]

What are tools you have used to print names ?

[@hemaranimohan1608]

Same doubt ya. Please tell me the name

[@blgibbs2]

Hi. I've been experimenting with resin bookmarks. Mine don't get hard they stay flexible. Can you shed some light on what it could be. I use the Clear Cast epoxy resin.

[@shannontengaru2924]

My name is Shannon tengaru from New Zealand 🇳🇿 I really like to know were can I get them because I am getting married soon with my boyfriend David Robert Paul heater he from Spain 🇪🇸 he coming to New Zealand to married me on the 19th

[@monazaki7257]

Hi, so beautiful🌸 can u let me know what is the text size ( width & height) that u made it for bookmarks? Thanks

[@keyata8923]

Hello, how much resin do you pour in each measuring cup after you picked it? I know you did 60 ml, so I just wanted to make sure I will be doing it right. Thank you so much for your video 😊

[@sq958]

I think it’s just to fit the mold. No exact measurement.

[@ionelalazar6516]

For beginners do you have some advice. Also what's the name of the masine you use to make the nail. I'm from Romania and I will love to make this. Thank you.

[@jessicabelanger929]

Thanks for this video. I very like the project. How many resin do you put in your molds. Do you have a trick to know how many I need for my molds ?

[@luzdelalbarodriguez1233]

La hojita transparente de las letras… cómo se llama esa hojita transparente… de casualidad el nombre es acetato… o cuál es el nombre…

[@donnacaldwell1904]

I just ordered these molds and I used Amazing clear fast resin. They did not completely harden. A little bend in them. How and where did you leave them to cure?

[@Berly5762]

I purchased the foiled used on these bookmarks. My Cricut blade is not cutting the material properly. could you share what material and settings you used to cut out the names?

[@ayeshatariq9819]

What font size would you recommend for bookmarks using cricut joy, I love your bookmarks

[@ayeshatariq9819]

I have just purchased the cricut joy, what font size would you recommend for resin bookmarks

[@islanoor7085]

absolutely lovely BM I'm just curious to know after colouring the edges i find the gold can only be noticed throughout the entire video on the edges but when they are finally placed in their holders you can see the gold rim at the top. is there something i missed as i tried exactly that but it can only be seen on the sides and not the top as your do in the finished product.

[@zazi1125]

Very beautiful thank you. What is the name of the purple tool that you used with the cricut to remove the vinyl please ?

[@lindouglass4115]

They are beautiful. How well do they work as bookmarks? Aren't they kind of thick?

[@phoeber1]

Hi I’m new to Cricut and I’m having a lot of trouble with cutting small cuts like that… what settings did you use?

[@saakshisurana5328]

I wanted to ask that from where can we get those names written in gold?? Means what we need to ask to the shopkeeper for them cuz it's first time I'm trying resin art that's why I don't know...

[@iwannabeme9841]

Would you mind sharing the name of the font used in this project? It's gorgeous! Thank you so much for your tutorials, they are excellent!!

[@maximo4]

It’s called Darling Modern

[@iwannabeme9841]

@@maximo4 Thank you!

[@efua29]

What's was the size font you used?

[@MissKatrinaaC]

@@maximo4 hey, do you know where I can find this font please?xx

[@ludo3911]

How did you set up your cricut? (Size, cut pressure…) Thanks