Resin Jewelry Tutorial: Using Pebeo Paints - Mixed Media

Resin Jewelry Tutorial: Using Pebeo Paints - Mixed Media
If you want to help my channel grow and make more videos for you You can make a donation trough this link: www.paypal.me/cutetreats
Your support means the world to me!
Hi there! In this tutorial I'm going to show you how to make simple charms with resin and Pebeo paints. These paints create beautiful abstract and unique designs. Paints used in this video were:
Pebeo Prisme Fantasy
Pebeo Moon Fantasy
Pebeo Vitrail Glass
If you have questions let me know in the comments section.
♥If you like this video give it a thumbs up, let me know in the comments and subscribe for more amazing videos!
Watch my previous tutorial here: • Miniature food tutoria...
FIND ME ON:
*Facebook: cutetreatsbyjany
*Etsy :www.cutetreats.etsy.com
*Instagram:#cutetreatsbyjany
Music: www.bensound.com
Resin Jewelry Tutorial: Using Pebeo Paints - Mixed Media

[@Just.another.subscriber]

Thanks for the idea of using a lighter flame rather than buying a blow torch. I only have a small project in mind and this might be useful.

[@Janabstra]

Glad I could help! Thanks for watching :)

[@chrysocolla93]

The way the paint spreads strangely gives me satisfaction. 😂

[@Janabstra]

+Ester Marie I thought I was the only one!

[@tbgreene6962]

Just love this technique!

[@WiseCire]

This video was so calming. I almost fell asleep lol in a good way lol

[@adeloach]

I found this video tutorial to be very helpful. Thank you!

[@zulmabeatrizmolina9443]

the blue square one reminds me of Starry night by Van Gogh, amazing!!!

[@ennis4489]

So amazingly beautiful.

[@kittykester8567]

I loved what you did withe the paint. I have been using it a long time and it gave me a couple new ideas. Thank you very much!!! Hugs, Kitty

[@phillippaphillips1580]

Clear instruction thank you

[@ZenaHerbert]

Thank you very much for this video, it is just what I was looking for and very clearly demonstrated. Love your colour choices, too! Thanks again!

[@Janabstra]

Thank you for taking the time to write this lovely comment :) Im glad you liked the video!

[@charmedlife7758]

Just beautiful from start to finish!

[@Janabstra]

Thank you!

[@violascrafttherapy9390]

Gorgeous.

[@benicio1967]

This was so beautifully done! Perfect! I loved it! Thank you so very much for sharing this process! Such fun to watch!!❤️💕❤️

[@Janabstra]

Thank you for your kind words and thanks for watching! :)

[@charmedlife7758]

Such an elegant video! Great job!!

[@harpersmythe658]

These are really pretty! The red and gold one reminded me of fire until you mentioned a Phoenix then I saw that too (rising out of its own ashes maybe?) 😊😊😊👍🏻👍🏻👍🏻

[@joyceparkes2678]

Gorgeous thanks 😊

[@nytflyt7]

Simply amazing.......BRAVO!!! Inspired to give this a try... Blessings & Peace, lynda

[@MariangelaBarreto]

Very beautiful!

[@LeslieNikulka]

These are lovely. Thank you for sharing. :)

[@SayMagnaFeek]

Absolutely beautiful!

[@Janabstra]

Thank you!

[@user-gq1db3hs8c]

COOL!COOL!COOL!

[@jenniferstone2254]

Such an amazing idea! I really want to try this 😄 Thank you for making this video 😊

[@Janabstra]

Thanks for watching!

[@irenedavo3768]

Beautiful

[@elakiyamurugan]

Fantabulous

[@theyhavememories]

So cool! Thanks for the inspiration!

[@Janabstra]

Thank you!!

[@jrdroptini]

Beautiful!

[@Janabstra]

Thank you!

[@iseejewelz3874]

BEAUTIFUL

[@Janabstra]

+Jewish Royalty Thank you :)

[@meghaasharmaa845]

love ur videos

[@quirkygirl2487]

This is EXACTLY where i want to go with resin n paints... TKU #Suscribe

[@simsgal3026]

Omg!!! They are sooo cuteeee!!!!!!!!!!!!!! Wow!!! That is an amazinggg ideaa!

[@Janabstra]

Thank you!!

[@LeaRama]

Wow! Those are gorgeous! What a great idea! TFS!

[@Janabstra]

Thank you so much! :D

[@Janabstra]

Thank you for watching :)

[@merryclicker]

I just wish you'd shown the back of the Fantasy Prisme charm. But I guess I'll just have to try this and see for myself. The fronts are beautiful!

[@vientrantriquang1435]

I like this ! that cute

[@Janabstra]

+Vientran Triquang Thank you!

[@gloomycandy101]

Wow, I wonder if these could be used with something like resin dice? Those are my favorite things to make with resin!

[@TWRahz]

The color combinations are amazing...I just go mind blown :D Really nice work :)

[@Janabstra]

Thank you!!!

[@BerryWhimsy]

This is really cute!

[@Janabstra]

Thank you :)

[@tkm_channel]

Beautiful！

[@Janabstra]

Thank you!

[@dragicazupancic6293]

Beautiful 😍

[@Janabstra]

Thank you! 😊

[@Nubian31]

unique

[@Janabstra]

Thanks!

[@gracefromglaur5488]

The green one looks like crocodile scales pattern, red, orange and yellow/gold reminds me of fire, blue galaxy

[@zohrek7660]

hi very very nice thanks....

[@Janabstra]

+Zohre K Hi! Thanks for watching!

[@liatushka]

Wow these are amazing!!!! could you please tell me which moulds you are using? Would really appreciate it. Thanks

[@cathyjohnson5652]

very pretty and creative. how do you seal the surface once painted?

[@dianacarrillo8873]

U should do one and tell them what I use for thst

[@AlchemistWays]

Very nice video. This processes are very helping. Can you please tell me the name of pins you use in this video?

[@grefa9]

Hi!! can i use metal molds for? i mean, can these unmold? thanks!

[@Rosie83844]

Hi what a beautiful tutorial, would you be able to tell us the colours you used , in the combinations, and if it was Prism, Moon, or transparent. I love a few of them but need to know the colours. Thank you for sharing a great tut. Cheers Rosie.

[@Janabstra]

Hi Rosie! Thank you :) The colors are: Moon: Gold. Vitrail: Sky blue, Crimson and Lemon. Prisme: Emerald, Eggshell white and the purple one which I don't know the name because the label erased sorry.

[@nanniemaeminer6882]

Enjoyed your videos your jewelry is very pretty. My question is where do you find the necklace chain that you show on the blue cabochon I really like that type of chain also where do you get your Bales and bezels. Thank you

[@harshithramkumar2027]

You get those on Amazon, Ali Express, Etsy..

[@williemccowan6924]

Do you have a web site i would like to put it on my desk top to save i really like this

[@vedranapavic8940]

A fascinating and very interesting process of creating beautiful pendants. Is transparent blue Vitral paint for glass?

[@Janabstra]

Thank you! Yes it is from the brand Pebeo

[@jeanmontminy8501]

Thank you so much for the great tutorial! I am wondering if you can tell me where you purchased the silicone tray. I have looked online, but am not able to find anything similar. Thanks so much!

[@elyssaberger5901]

Jean Montminy I got mine at Little Windows. Ships fast and they are the nicest people. www.little-windows.com/products/large-silicone-doming-tray

[@daphne_lam]

Omg!! Totally awesome:D although, you should make it clearer and faster to understand it better. I didnt understand it well for some reason...great vid tho!!^-^

[@Janabstra]

Thank you! :)

[@munchpanda]

What kind of necklace did you use? 😊

[@delfinacasaretto659]

Just beautiful, what did you use to pop the bubbles? Was that some kind of heat gun or a lighter? Thank you

[@Janabstra]

Hi! Thank you. I used a lighter.

[@k192447]

formidaveis,formidaveis.

[@hjfjjjg2487]

the red one look like a flame of phoenix

[@pesto12601]

+Hjf Jjjg um.. think she said that...

[@Janabstra]

+Hjf Jjjg Yes it does :)

[@4lexasaku]

does this resin turn yellow?

[@StuWright]

cool,i wonder if acrylics could be mixed with resin,i`m guessing probably....

[@Janabstra]

+Stu Wright I haven't tried it yet. I will make a video soon. Let's see if it works!

[@shwetarohatgi9471]

How long u wait for paint to cure before doing the final resin? These are beautiful

[@Janabstra]

Its been a long time since I made the video and I don't remember but it should be completely dry. Thank you for watching!!

[@ashasinha4981]

Hi beautiful work iwant Io know can I use any mould and why did u fire d product can we use gas lighter is mould is silicon or plastic one waiting for reply thanks

[@ashasinha4981]

Hi I asked you three weeks ago some questions but still waiting for d answer

[@Janabstra]

Hi there! The mold is plastic but you cannot use any plastic mold for resin. They have to say they're made for resin if not your piece will stick to the mold. The lighter is for popping the bubbles in the resin.

[@ThaoTran-os6li]

How did you do to eliminate all bubbles? The resin looks so clear

[@Janabstra]

Hi there! Nothing at all. Little windows resin barely makes bubbles when mixed very slowly

[@OrangeTabbyCat]

What kind os bails do you use? Love that paint effect and will definitely try it.

[@Rosie83844]

+OrangeTabbyCat , they are just called glue on jewellery bails, you can find them on Ebay, or lots of places, even if you have a bead shop near you they should have them. Hope it helps, Cheers Rosie. P.S I didn't do the tutorial I just seen your question and knew what they were called.

[@Janabstra]

+OrangeTabbyCat as +Rosie Donnelly said; Glue on bails. I got mine on Etsy

[@williemccowan6924]

what is the drying time for these paints because i would then want to cover it with resin primarily for jewelry

[@Janabstra]

I let them dry for 24 hours

[@private91205]

THANKS FOR THE GREAT VIDEO. CAN YOU PLS TELL ME WHAT TYPE OF RESIN YOU USED? IT IS THE MOST CLEAR RESIN I HAVE EVER SEEN.. THANKS

[@Janabstra]

Hi there! Thanks for watching :) I used little windows resin. You can get it at www.little-windows.com

[@Janabstra]

Thanks for watching :) The resin is from www.little-windows.com best resin I've ever tried.

[@harshithramkumar2027]

Beautiful ❤️ Are the colours too mixed in resin or simply dropping the colours ?

[@Janabstra]

Just dropping the colors. Thanks for watching!

[@sherrysaulnier3940]

These are gorgeous where do you get your supplies? Thanks so much:)

[@Janabstra]

Thank you! From etsy :)

[@marinamkd]

Hi there! I have an issue with my work surfaces at home, apparently none of them are on a level! Do you have/have had this issue and what have you done about it? Would be of massive help!

[@jaybird8621]

Use shims under the table legs (or your work surface) until level? Not hard

[@sherryllehatfield2689]

Where do you order those paints?

[@zoozoo444]

These pieces are beautiful! Where can I find those molds?

[@Janabstra]

Thank you! The molds are from www.little-windows.com

[@miriamtabarestobon4631]

Tan amable, son pinturas para efectos especiales????? Muchas gracias y hermosisimo!!!

[@Janabstra]

Miriam Tabares Tobón gracias corazon! Si, son pinturas especiales se llaman Pebeo paints. Yo las consegui online. Gracias por ver mis videos!

[@miriamtabarestobon4631]

Janabstra mil gracias por responderme!!!! Hermoso todo lo que haces!!!!

[@Janabstra]

Miriam Tabares Tobón no hay se que :)

[@mariepineau3318]

do you put them in the hoven? how can I make holes??

[@winksartistt3817]

No need to bake - they harden on their own. Drill the holes with a jewellery drill, but wear a mask - you don't want to inhale any of the dust. Alternatively you can buy bails that you can glue to the back of the piece.

[@doublek1349]

I'm from Egypt I want that color😢

[@cinnabun4792]

what happens if you mix the pebeo paint right into the resin before pouring. Does it not cure properly?

[@kwhiteway01]

Cinna Bun I tried this recently, it doesn’t work very well.

[@winksartistt3817]

I notice you were using a torch on the wet resin pieces. Is it safe to do so?

[@Janabstra]

It is safe if you do it quickly, if you let the torch on the same spot for a while the resin will burn. Be careful

[@williemccowan6924]

what keeps the paint from rolling off the edge of the piece

[@pesto12601]

edges.. you sure do have lots of questions!

[@stillhatecoffee]

How do you prime the molds please? I've used these plastic ones with resin, and it stuck in and couldn't release. I really want to give these a go!

[@dawnmorris9940]

www.amazon.com/Environmental-Technology-33900-Release-Conditioner/dp/B000XAWQJU/ref=pd_bxgy_201_img_2?ie=UTF8&psc=1&refRID=JF50GAYPR93XCDY28E7B

[@Janabstra]

This specific molds dont need mold release you can get them at www.little-windows.com

[@adrianatsai8308]

Where can I get the thing that you turn the piece in to charm

[@Janabstra]

Its called a glue on bail and you can get it on Etsy

[@jakehenry4121]

Hi awesome video! I just wanted to ask what kind of molds you used... they didn’t look silicone and I was under the impression that resin stuck to anything but silicone... so fill me in here 😂😂

[@Janabstra]

Hi! The molds are from www.little-windows.com They are made of a special shiny plastic and don't need mold release. You can use certain plastic molds not all molds will work with resin. In my opinion silicone molds are the best but these are also good.

[@rutten69]

Where can I buy the "thing" you glued on on the heart ? And what is the name of it? All the best from Norway

[@Janabstra]

Hi! It's called a "glue on bail" I brought mine from Etsy 😊

[@williemccowan6924]

what type of colors is this you add into the piece

[@irenedavo3768]

Willie McCowan Pebeo! Look them up on You Tube! Special effects!

[@edwardsrc7]

I found my assortment of colors at hobby lobby and Micheal's crafts. How long did it take for your paints to dry before you domed the pieces? Mine turned out NOTHING like these at all :(

[@Janabstra]

+edwardsrc7 I'm sorry to hear that! I let them dry for about 24 hours and then I added the resin. Hope it helps :)

[@JaneDoe-xl5be]

edwardsrc7 There are three different types of Pebeo paints that all produce very different effects. Is it possible you didn't use all three like she did? Complete mixing of the Moon and Prisme is critical, especially for the Prisme paints. The first time I used the Prisme paints I did not mix them well enough. I was too anxious to start playing! :) As a result, I barely got any of the honeycomb effect. I was so disappointed and thought I just wasted a ton of money. I did some investigating and suspected I didn't mix them enough. I had success on my second try. So, if you indeed were using all three paints in same manor as in the video, my best guess is that they weren't mixed well enough.

[@charlenebutler7969]

what kind of paint is that can u get that from Michaels craft store

[@JaneDoe-xl5be]

Charlene Butler These are three different types of paints by Pebeo paints: Pebeo Vitrial - thin, transparent paint (she used the blue color in a square shape), Pebeo Fantasy Prisme - opaque paint that forms honeycomb designs as it dries, and Pebeo Fantasy Moon - opaque paint that produces swirly pearlescent/metallic designs. These paints can be found at Michaels. However, I found that often the smaller Michaels stores don't carry them. They can be ordered at lots of craft stores online. Amazon carries them too. They are really fun to play with. I use them on polymer clay.

[@W20AL]

Qual o tipo de resina você usa aqui

[@Janabstra]

Little windows resin www.little-windows.com

[@jackesotomorales7146]

resina en donde comprarla

[@Janabstra]

www.artresin.com/?rfsn=123200.3ba3

[@m.hamzakhan4315]

pebo paints are not available what other colours can we use. please reply fast

[@pesto12601]

+HamzA khAn ya ever heard of this thing called Amazon?

[@sarahphougat6028]

Can u plz tell me from where u got this resin mould? Thanks plz send link

[@pesto12601]

internet

[@Janabstra]

www.little-windows.com

[@sarahfields288]

how long does the paint take to dry?

[@JaneDoe-xl5be]

Sarah Fields Of course the drying times of these paints depends on the same factors that influence all paint drying times...paint thickness, ambient temp., humidity, etc. I have never used the Vitrial paint, so can't say what it's drying time is for certain, but I can't imagine it would be too different than the other two. In fact, since it is a much thinner paint, I suspect it would dry quicker. I have found the Prisme and Moon paints take at least 24 hours to dry. However, even after 24 hours I would use it or wear it if it's jewelry. It's dry enough to move on the the next step, adding resin, glaze, adding more parts to your piece, etc., but it's still not dry enough that it couldn't be damaged by dropping it or gouging it with something. I would give it a minimum of 48 hours, longer is better, before using it.

[@Colorfultography]

is this paint hard to find or expensive? thanks

[@JaneDoe-xl5be]

colorfultography If you are in the US or Canada you can find it at most Michaels craft stores. You can easily find them online at lots of crafts stores and even Amazon. The sets of 12 20 ml bottles are around $25 USD. The individual bottles are $7-8, but come in 45 ml bottles.

[@williemccowan6924]

what kinds of paint is this is it a resin paint

[@cyhomer]

Willie McCowan .....pebeo paints

[@sharonrice7925]

Where do you buy Pete o paints?

[@JaneDoe-xl5be]

Sharon Rice If you live in the US or Canada, you can find the Pebeo line of paints at Michaels. Sometimes the smaller Michaels stores don't have them though. They can be ordered at lots of craft stores online. Amazon also has them.

[@hollanation7]

Where did you buy your resin molds?

[@Janabstra]

www.little-windows.com

[@chrisspreacherman7400]

Where can u get the paints?

[@joannecarroll5504]

That will depend whereabouts in the world you live - I just did a Google search for 'Pebeo Paints' & got 496,000 suggestions of places to try - I'd start with craft stores either near you or online ones who deliver to your part of the world. Good luck.

[@smartsa10]

Which resin u used?

[@Janabstra]

smartsa10 little windows resin

[@artyyc4208]

Can i use any other brant paints ?

[@Janabstra]

Chanchal Pusadkar it wont work, these paints are different. You can find them at Michaels or ebay

[@artyyc4208]

Can i used acrylic colors???

[@artyyc4208]

Can i use acrylic colors?

[@Janabstra]

Chanchal Pusadkar you can use acrylic paint but it wont look like the ones in the video. Have fun experimenting :)

[@artyyc4208]

thankx

[@louisianna5524]

Sorry i love these but i can't read the words your putting up Can you write what you do in the description box please 😄

[@elakiyamurugan]

What is the name of the paint u use mam?

[@Janabstra]

Pebeo paints I bought them on Ebay :)

[@ThisOLmaan]

and these pebeos are not mixed with Isopropyl Alcohol? its just the paints?

[@Janabstra]

Nope, nothing. Its just the paint. They are amazing

[@ThisOLmaan]

@@Janabstra : ok Thank you sweetie and Very nice pieces you made 🤗

[@williemccowan6924]

Why dont you leave it in the mold for the full process

[@joannecarroll5504]

When working with smaller pieces, you usually remove the resins from the mould first to ensure you have full control over the extremely small quantity of anything being floated on top of the first layer, which will later fully encapsulated in resin. Without being able to see the edges, you may just pour too much which would head toward the sides of the mould instead of you floating it (working well within surface tension). This creates a dividing layer of paint which would stop the resin layers from being able to meet ; a resin 'sandwich' with the exposed layer of paint having less structural integrity than the resin on either side. Floating would ensure the paint can be fully encapsulated, ensuring the piece has overall structural integrity.

[@Janabstra]

I take the pieces out of the mold so when I pour the second layer of resin it domes. If you leave the piece inside the mold and do a second coat it will have edges.

[@al-ad-aniya4048]

Can't see a thing, darker background please.

[@enikopelsoczy7622]

Does anyone buy these jewelry? Or do you make them just for hobby?

[@Janabstra]

Enikő Pelsőczy I havent listed them on my shop. I just like to share my ideas with others. Thanks for watching :)