Рет қаралды 966,195
Materials Required:
1、Epoxy Resin (3:1 ratio)
2、Gold and Silver Foil
3、Epoxy Pigments (White, Gray, Black, Pink)/
4、Gold and Silver Alphabet Stickers
5、Keychain Mold (a link is provided for purchase)
Procedure:
1、Prepare Materials: Ensure all materials are ready, including epoxy resin, pigments, gold and silver foil, and the mold./
2、Mix Resin: Mix the epoxy resin and hardener in a 3:1 ratio.
3、Add Pigments: Add different colors of epoxy pigments as desired./
4、Pour into Mold: Pour the mixed resin into the keychain mold.
5、Add Gold and Silver Foil: Tear off some pieces of gold and silver foil and add them to the resin as preferred./
6、Apply Alphabet Stickers: Before the resin fully hardens, apply gold or silver alphabet stickers.
7、Cure: Wait for the resin to fully cure, which typically takes at least 24 hours.
8、Demold: Once the resin is fully cured, remove the keychain from the mold./
9、Clean Edges: If necessary, use sandpaper or a blade to clean up the edges of the keychain for a smoother finish.
Keychain mold: amzn.to/48fPJ95
White and black pigment: amzn.to/42LwSBK
Color pigment: amzn.to/49bIQXv
Silicon pen: amzn.to/3SXD1r6
Digital Pocket Scaleamzn.to/49tQb5b
Gold sticker :amzn.to/3SAzgGN