Resin Tools: Follow Up!

  Рет қаралды 319,823

Peter Brown

Peter Brown

Күн бұрын

Пікірлер
@BearMaked
@BearMaked 3 жыл бұрын
Well, I did learn that if I need to make divots in softwood, there's a very complicated way to go about making a tool that will let me do it.
@peterbrownwastaken
@peterbrownwastaken 3 жыл бұрын
We’re solving complicated problems here.
@CaptainMcSmoky
@CaptainMcSmoky 3 жыл бұрын
@@peterbrownwastaken Colloidal silica should help a lot with this project!
@PatEm10
@PatEm10 3 жыл бұрын
@@peterbrownwastaken more like complicating solved problems!
@johnzdowning
@johnzdowning 3 жыл бұрын
Lol
@jonaeflure
@jonaeflure 3 жыл бұрын
When your adding something with a syringe you need to remove the air from the container first. Think of it like pulling medication from a vile. First you have to add an equal amount of air from with the syringe before pulling out the medication. Squeeze the air out of the bottle with your hand and gradually loosen your grip while adding fluid/resin from a stringe. This will stuck the fluid into the mold. I love watching your experiments... 🥰
@thebatmary5954
@thebatmary5954 3 жыл бұрын
“Any improvement will be... an improvement.” -Peter Brown, 2021
@jasperfk
@jasperfk 3 жыл бұрын
Take that, philosophers!
@peachdoxie
@peachdoxie 3 жыл бұрын
Big 2021 mood
@milenamartins21
@milenamartins21 3 жыл бұрын
To be fair I thought the exact same thing
@tadcooper9733
@tadcooper9733 3 жыл бұрын
"we're totally getting flagged!" Ya kno Pete, I didn't see it until you said that.
@Will-mk5pj
@Will-mk5pj 3 жыл бұрын
Yooo! Nice profile pic. Fable 1 was pretty fun
@Krystle_xo
@Krystle_xo 3 жыл бұрын
i didnt see it either until he said it and now i cannot stop laughing
@peterbrownwastaken
@peterbrownwastaken 3 жыл бұрын
CHICKEN KICKING TIME!
@Solaris_Kou
@Solaris_Kou 3 жыл бұрын
@@peterbrownwastaken pardon me
@tadcooper9733
@tadcooper9733 3 жыл бұрын
@@peterbrownwastaken Your health is low! Do you have any potions? or food...?
@shannahmiller
@shannahmiller 3 жыл бұрын
I agree with Mrs. Brown that we didn't really learn anything, but this was a super fun video to watch. Thanks for doing the follow-up.
@peterbrownwastaken
@peterbrownwastaken 3 жыл бұрын
Thank you for watching! it's out of my head and I think we can put this idea to rest now. :)
@No_Way_NO_WAY
@No_Way_NO_WAY 3 жыл бұрын
there is no situation where "we have learned nothing" would be true. it might not have been something positive, but we now know that filings and powdered metal make no drills :P
@ShepardKammander
@ShepardKammander 3 жыл бұрын
@@No_Way_NO_WAY Agreed, learning what doesn't work isn't the same as never trying to begin with.
@MandoHalrissian
@MandoHalrissian 3 жыл бұрын
We learn more from failures than success...
@benjaminlamothe2093
@benjaminlamothe2093 3 жыл бұрын
@@peterbrownwastaken while i wish we could see more you in charge and i'm always excited to see what you think of next
@erin9868
@erin9868 3 жыл бұрын
Your wife is such a delight. Shes so funny and I love how interested she always is in your craziness. Shes one of us for sure!
@owjburnham4317
@owjburnham4317 3 жыл бұрын
“This is iron oxide.... literally just iron powder” Me, a chemist: No!
@darkmann12
@darkmann12 3 жыл бұрын
I was thinking this, lol
@Ruthavecflute
@Ruthavecflute 3 жыл бұрын
Literally just rust.
@helgedaniel2944
@helgedaniel2944 3 жыл бұрын
Its basically a salt isn't it?
@Malidictus
@Malidictus 3 жыл бұрын
I was thinking the same thing - quite literally NOT just iron powder :) Also not literally rust, though. What he had looked like FeO - a black powder. While "rust" is a loose term, it most commonly refers to Fe2O3 - a brown powder. I'm not sure what the physical characteristics of them are, but it seems like a straight iron suspension worked best... Up until the resin gave up.
@SamChaneyProductions
@SamChaneyProductions 3 жыл бұрын
@@Ruthavecflute Actually would be closer to magnetite. There are many different iron oxides with varying numbers of oxygen and iron atoms. This one is a black powder and I would guess is Fe3O4 aka Iron (II III) oxide. Rust usually refers to hydrous iron (III) oxides like Fe2O3 nH2O
@Rose-jz6sx
@Rose-jz6sx 3 жыл бұрын
I love having your wife there reacting to your results, if she's down I think she should be at the end of all your vids
@Schnebit13
@Schnebit13 3 жыл бұрын
Kind of like Glen And Friends cooking
@nicola.00
@nicola.00 3 жыл бұрын
Yes! More Mrs Brown please!
@JamesBiggar
@JamesBiggar 3 жыл бұрын
Interesting series. I learned the hard way that epoxy and chopped strand fiberglass mat don't mix. Epoxy can be used with weaved fiberglass cloth, but the strands in fiberglass matting are covered in a binder to hold them together in that mat form. Epoxy won't dissolve the binder, which makes it hard if not impossible to wet the fiberglass properly and get a good cast. Polyester resin should be used with matting because it will dissolve the binder and fully wet the fiberglass ;)
@Bob_H
@Bob_H 3 жыл бұрын
Nice to know, thanks.
@NotProFishing
@NotProFishing 3 жыл бұрын
Yup but if your epoxy has MEK peroxide in it you can but you must vac bag it.
@colekeller5648
@colekeller5648 3 жыл бұрын
Wait im really fucking curious why don't the cut strands work they loose properties in casting?
@colekeller5648
@colekeller5648 3 жыл бұрын
And if you got like a vid to check out that'd be awesome
@Sir83chris
@Sir83chris 3 жыл бұрын
@@colekeller5648 Fibreglass' entire strength as a material is it's ability to withstand impacts and flex against it's 'top' plane (the largest flat surface of it), which makes up for the weakness of it's resin coating when used as a composite - and the resin makes up for fibreglass' weak tensile strength (in that if you pull the mat from the side, it'll tear apart fairly easily). Hence, chopping the fibreglass up basically makes the 'composite' kinda just resin with some strands of fibreglass that happen to be inside it, rather than the fibreglass + resin actually working together in a way that makes up for each other's weaker properties. I could be a bit wrong, or there may be a very fancy way to make a fibreglass composite that resists twisting/torsion using multiple laminates, but I think according to my more basic material textbooks that's more or less correct haha.
@ArcaneForge
@ArcaneForge 3 жыл бұрын
Not sure if this is any help to you or not, bit I saw a TikTok the other day from a roofer or construction worker. They mentioned that they regularly work with fiber glass and it irritates their skin for days after. Apparently, if you cover your skin (arms etc) with shaving cream and then use a blunt bank card or something similar and scrape the foam off (as if you were shaving with a razor), it removes all the embedded fiber glass that you can't see and stops the irritation!
@shannabolser9428
@shannabolser9428 3 жыл бұрын
or you can just use tape or a lint roller. it will stick to the fibers and pull them right off your skin. Yes personal experience talking here. you can also use baby powder on your skin before a fiberglass project to keep the fiberglass from getting into your skin as much in the first place.
@ItsBugtronic
@ItsBugtronic 3 жыл бұрын
thanks you both for the info I will be using these in the future
@KatieCottingham
@KatieCottingham 3 жыл бұрын
Or you can take extra steps in wearing disposable, single use jump suits and proper process of putting them on and taking off. My family has an extra allergy to fiberglass and other insulation products, so if any skin contact occurs, it's hives that last months and hurt like hell. I suspected this and got it confirmed in an environment where I could wear protective clothing, but my last summerstock job as a props artist was working in a converted warehouse without air conditioning. My work area while carving pink foam (no hot tools) got up to about 108° to 110° and all I could find was a thin cotton hoodie in my car to try and protect my arms and chest, and keeping a shopvac beside me for vacuuming off every 2-5 minutes. It made the whole process take longer because I to stop and go sit in the air conditioned office to cool off, in addition to stopping to vacuum off repeatedly. I hadn't thought ahead to keep a disposable jumpsuit in my personal gear bag, so that was on me given I knew my own history with pink foam and it was the cheapest thing we could get for such items at the time. Loose and mat fiberglass are more common in big molds that need a lot of strength and in scenic pieces that need strength but have to be lighter than most other construction material. So protect from exposure first, have a shopvac with a filter bag on it at the ready and benadryl + a friend with a phone to call 911 if it goes into full anaphylaxis, duct tape and liner rollers works wonders, and don't forget to cover your hair because you don't want tiny fibers that fly up to catch in your hair and then fall into your eyes later.
@ironbacon
@ironbacon 3 жыл бұрын
That works great for the fires but when you sand the stuff the only I have found to get the dust out of your skin is water and time
@SAVAGERNBW
@SAVAGERNBW 3 жыл бұрын
I've done a bit of fiberglass sanding and my dad used to be a boat builder (did it all for years) a cold shower and dish soap does the trick pretty well
@MichaelMacGyver
@MichaelMacGyver 3 жыл бұрын
I'm leaving a comment to interact and show my support of the channel.
@peterbrownwastaken
@peterbrownwastaken 3 жыл бұрын
I’m thumbing this up and leaving a comment to show support of your support! :)
@elizabethgodwin7679
@elizabethgodwin7679 3 жыл бұрын
Wholesome :)
@gregiep
@gregiep 3 жыл бұрын
“A couple large amounts.” Excellent measuring system!
@brandonwalker272
@brandonwalker272 3 жыл бұрын
The mat has taken on some color change since the last good resin cleaning.
@Nyxbeeb
@Nyxbeeb 3 жыл бұрын
Hey, Peter, have you ever thought about making resin game dice? Like the dungeons and dragons kind? I'd be interested in seeing your process of that!
@childofatom95
@childofatom95 3 жыл бұрын
that'd be amazing
@maniakb416
@maniakb416 3 жыл бұрын
I would watch this just to see his cold open for the episode.
@No_Way_NO_WAY
@No_Way_NO_WAY 3 жыл бұрын
as a gamer i second this. some normal colered ones and maybe some special ones that have a speciality in the center. something where the ppl at the gaming table ask.. "wow, how did that get in there?!!?"
@eleanorjlh
@eleanorjlh 3 жыл бұрын
I agree! There's such a huge and creative resin dicemaking community, I'd love to see Peter's take on it!
@ChazoAnwah
@ChazoAnwah 3 жыл бұрын
I think he has. I could be wrong
@FishersShop
@FishersShop 3 жыл бұрын
When my screws aren't going in as expected, I just hammer them in the rest of the way too! Great follow-up
@mercifulhorror4935
@mercifulhorror4935 3 жыл бұрын
Hmm interesting
@doubledarefan
@doubledarefan 3 жыл бұрын
Just another way to say "Screw This!".
@peterbrownwastaken
@peterbrownwastaken 3 жыл бұрын
It earned it.
@humancattoy7767
@humancattoy7767 3 жыл бұрын
So. If you can't screw it, beat it. I'll see myself out.
@notanimposter
@notanimposter 3 жыл бұрын
I would never consider fiberglass a friend. Fiberglass is the enemy.
@No_Way_NO_WAY
@No_Way_NO_WAY 3 жыл бұрын
fiberglass is like a bad dog/cat... it gets everywhere even if you try to prevent it from getting there. and if its on your skin, only loads of water will get it off you. ^^
@zilleaxolotl3457
@zilleaxolotl3457 3 жыл бұрын
any glass small enough to get in my lungs is a creation of hell
@KatieCottingham
@KatieCottingham 3 жыл бұрын
@@No_Way_NO_WAY Tape is better than water for removing fiberglass! And extra steps to keep it off your skin to begin with make life slightly less stressful. - I say as someone who has taken family to the ER from an extreme reaction to laying insulation in the attic. People think it's only going to be hives, but it can turn into anaphylaxis.
@No_Way_NO_WAY
@No_Way_NO_WAY 3 жыл бұрын
@@KatieCottingham i was supporting a welder at a powerplant who had to weld steam pipes towards a steam turbine during my practical semester during my study... there is no way you can protect yourself from the fibers of the fibreglass towels used to protect valves and such. you dont even get additional gear for it. not even a filter maks. and if its all on your body even in your underwear, you wont use tape :P especially as a man that never had shaved his body before. The worker told me to use cold water for 30 seconds (to rinse the fibres that are not stuck to the skin) than go as hot as you can bear to open the skin pores and flush out the fibres from there. it acutally worked pretty well. i cant remember any big displeasure afterwards, but i surely remember the shower in the powerplant (which was extremely unusual for me to do there)
@blakefosse6154
@blakefosse6154 3 жыл бұрын
@@No_Way_NO_WAY Best way to get fiberglass/carbon fiber out of skin, in my experience, is expanding shaving gel. Don't lather it, just spread it on your skin and let it rise and expand on its own.
@JackmanWorks
@JackmanWorks 3 жыл бұрын
Never have I watched a video of yours and thought of artificial insemination...
@peterbrownwastaken
@peterbrownwastaken 3 жыл бұрын
We made it. Today was a wild day.
@lunarpitch
@lunarpitch 3 жыл бұрын
@@peterbrownwastaken I don't know how feel about all of this lol
@demastust.2277
@demastust.2277 3 жыл бұрын
​@@peterbrownwastakenWhat aare ya going to name the baby?
@shinji391
@shinji391 3 жыл бұрын
This is quite the thread already.
@adrenalinemadness3340
@adrenalinemadness3340 3 жыл бұрын
OMG hahaha this is wild
@gv6262
@gv6262 3 жыл бұрын
You're my favorite resin worker!
@peterbrownwastaken
@peterbrownwastaken 3 жыл бұрын
Wow, thank you!
@petervilla5221
@petervilla5221 3 жыл бұрын
And occasional wood worker!
@Mainjoyner
@Mainjoyner 3 жыл бұрын
The reason I ever did anything with the stuff
@whiffysole
@whiffysole 3 жыл бұрын
@@Mainjoyner The resin you did?
@Mainjoyner
@Mainjoyner 3 жыл бұрын
@@whiffysole yeah, I dried and encased the flowers from my wedding - among other projects
@Darthwill44
@Darthwill44 3 жыл бұрын
I for one learned how they make harbor freight drill bits.
@KatieCottingham
@KatieCottingham 3 жыл бұрын
I think that depends on how you use those bits. 🤷‍♀️ I've only had a problem with a few over the course of a dozen plus years, but I can agree they go dull faster. Of course, I've seen freshmen undergrads and lazy graduate students blow through multiple boxes in an academic year. Sometimes it's not the quality of the tool but the patience of the carpenter that makes the difference. When I was broke and got a set for Christmas from my equally poor family, I made that set last for nearly 6 years, only replacing the 4 most common after about 2 years. That said, today I have a mixed set of more expensive brand name bits that have held their edge and been able to be honed for continued use. But the dull Harbor Freight bits make for great practice scrap for welding lessons, so nothing goes to waste! 😉😄
@kiokokoffin
@kiokokoffin 3 жыл бұрын
haha 😂
@anthonysnow7277
@anthonysnow7277 3 жыл бұрын
To quote Adam Savage "failure is always an option"
@woofy1988
@woofy1988 3 жыл бұрын
Name idea for if this becomes another series: Toolin' Around
@deacont3250
@deacont3250 3 жыл бұрын
Watching you force resin into that bottle, and realizing there was no way for the air to escape, was giving me a decent amount of anxiety.
@aaronius932
@aaronius932 3 жыл бұрын
We use carbon-fibers whenever we do panel repairs on the jet, we cut up the fibers around 1/4 inch and put as much of it as we can in the resin. You mix the fibers with the resin before you pour it BTW so it all suspends in the resin
@lui5gif
@lui5gif 3 жыл бұрын
"Things aren't exactly going to plan" Ah yes, a Peter Brown classic :D The end result never fails to impress, however
@ItsBugtronic
@ItsBugtronic 3 жыл бұрын
The chaotic energy of this project is very relatable with every resin project I have tried, so thank you.
@SwitchAndLever
@SwitchAndLever 3 жыл бұрын
I tell ya, hair is where it's at! 😉
@braydenlawrance2673
@braydenlawrance2673 3 жыл бұрын
Oh my God I thought you died We haven’t had a video in a while
@EddieBurke
@EddieBurke 3 жыл бұрын
This comment made me realize Pete has reeeally good hair genes
@calinguga
@calinguga 3 жыл бұрын
did you know at edison they tried making lightbulb filaments from moustache hairs, among many others? and they obviously worked being in a vacuum, but not great. imagine a world where that would've been the best material, slowly replaced nowadays by artificial moustache hairs, leaving a whole guild of pogonotrophes-pogonotomes unemployed. a true dystopia.
@sophiegrey9576
@sophiegrey9576 3 жыл бұрын
whair it's at.
@savourypotato
@savourypotato 3 жыл бұрын
Ahh the old Natures fibreglass...
@TheMaxwellee
@TheMaxwellee 3 жыл бұрын
"It's mostly the head" - Mrs Brown I was genuinely impressed by that observation, thank you both.
@woodfather
@woodfather 3 жыл бұрын
" _Any improvement will be an improvement_ " Can't argue with that! 😆😆 Cool video Pete!
@tomorange2330
@tomorange2330 3 жыл бұрын
"What'd we learn?" "Nothing!"
@garrettSlingerland
@garrettSlingerland 3 жыл бұрын
"chaos, molds, epoxy, blah blah blah" .....there's the new shop time tagline
@ericchambers9023
@ericchambers9023 3 жыл бұрын
Lol, need balsa wood to try the nails, screws, and cast drill bits in.
@meredith6483
@meredith6483 3 жыл бұрын
Yes! Thank you for always giving us what we want 😊
@distortohio
@distortohio 3 жыл бұрын
It’s always lovely when Mrs Brown makes an appearance
@alxfrmk
@alxfrmk 3 жыл бұрын
"We've seen how the last ones did. So, any improvement would be... an improvement?" - LMAO, thank you! Great line!
@Rich.Staples
@Rich.Staples 2 жыл бұрын
Nice to see your wife actually being supportive and encouraging! Now I don't mind her in your videos.
@hamjudo
@hamjudo 3 жыл бұрын
We learned that if we want to try this at home, we should look for softer materials. Balsa wood is probably too dense and far too strong. I think it is time to look at foams of various types. We want the lowest density extruded polystyrene or styrofoam we can find. If the tools are too weak for the material, find weaker material.
@grey1763
@grey1763 3 жыл бұрын
floral foam would work nicely
@jctu186
@jctu186 3 жыл бұрын
Brb going to CNC machine some floral foam with my epoxy bits
@Redman-2490
@Redman-2490 3 жыл бұрын
Love it when we get a mat cleaning. So satisfying 😌😍☺
@RoseKindred
@RoseKindred 3 жыл бұрын
If there is a way, Peter will create life from resin, and if there is not, he will make it work.
@tinylittleworm2264
@tinylittleworm2264 3 жыл бұрын
It hurts my heart to see you put so much work into something that crumbles away lol, but even the failures are super fun to watch!! and you always have such a great attitude! Been watching for a few years, still love every single video you put out!!
@AChi__
@AChi__ 3 жыл бұрын
The main issue with the drill bits was the heat generated by friction between the workpiece and the respective drill bits. Coming up with a way to reduce the friction while heavily reducing and venting the heat would yield a much more promising result.
@notgray88
@notgray88 3 жыл бұрын
Possibly a small stream of water like they use on regular drill bits
@AChi__
@AChi__ 3 жыл бұрын
@@notgray88 i like your idea over my original one, which was, to either use oil or, for some really weird reason, powder 😑. Yeah powder 🤪. I felt so cringed out my own powder idea, that I ended not even including my own two suggestions to remedy the heating and friction issues 🤣
@daniellej8800
@daniellej8800 3 жыл бұрын
Peter you snuck in a very satisfying silicon mat cleaning and I am thankful
@m2hmghb
@m2hmghb 3 жыл бұрын
What comes to mind is how they use a sprue in metal casting to keep a reserve of material available as the metal solidifies. I'm curious if that would help you.
@khills
@khills 3 жыл бұрын
I’m glad to hear that the definition of improvement hasn’t changed. 😂😂😂
@epickitten1838
@epickitten1838 3 жыл бұрын
Why not combine all of them to make a super bit? Hardness of the metal filings, stability of the iron oxide, mixed with thin strands of fiber glass for strength, all pre-mixed before going into the mold for maximum resin holding power
@mutated__donkey5840
@mutated__donkey5840 3 жыл бұрын
That sounds like a nightmare
@jsVfPe3
@jsVfPe3 3 жыл бұрын
It's like an alloy but super shitty.
@marikaefer
@marikaefer 3 жыл бұрын
Cleaning the blue mat was such a nice bonus!
@matthewwatkins3416
@matthewwatkins3416 3 жыл бұрын
Hi Peter, could you cast a resin drills with diamond dust tips, then it might not wear as much?
@nowayjerk8064
@nowayjerk8064 3 жыл бұрын
no
@skie6282
@skie6282 3 жыл бұрын
I imagine it would turn out like the iron oxide, too crumbley
@tylerblubaugh5549
@tylerblubaugh5549 3 жыл бұрын
The biggest issue seemed to be the resin not holding
@tempestblack2771
@tempestblack2771 3 жыл бұрын
Not gunna lie, resin tools is the reason I subscribed to you channel.
@lishacossbook2806
@lishacossbook2806 3 жыл бұрын
Peter, I would love to see the effect of pen ink in resin, like you could drop it in and stabilise it. Or mix it in like a dye. Their are so many different colours of pen ink and it’s such a weird viscosity I think it would just be really cool and unique. A lamp would be cool, anything that could have light pushing through.
@gcook725
@gcook725 3 жыл бұрын
Fountain pen ink in small amounts might work alright since they're water-based.
@Mainjoyner
@Mainjoyner 3 жыл бұрын
Especially the metallic look many inks have
@aember
@aember 3 жыл бұрын
I'd be worried that the fountain pen ink would react with the resin as most are water-based. I do have a set of Chessix dice that have a really cool ink-like effect in them, but I think that was (likely) done by just dropping alcohol ink into clear resin and not mixing much. Though maybe fountain pen ink could work if you used trace amounts. Man. Now *I'm* curious.
@lishacossbook2806
@lishacossbook2806 3 жыл бұрын
I think it would be cool for him to dissect some everyday pens, use their guts and then drop them into the resin. Be a cool idea for a pen body, that’s if it works of course.
@gcook725
@gcook725 3 жыл бұрын
@@aember It shouldn't react, but too much would make it cure improperly for sure... Though Noodler's Baystate Blue might react. That stuff is evil.
@sblinginlikeaboss3939
@sblinginlikeaboss3939 3 жыл бұрын
You should definitely consider making this a dedicated series! So many things to explore
@WendysAnime
@WendysAnime 3 жыл бұрын
Peter i heard of some Ceramic resin, Heats up to become rock hard glass you should totally try a project with it! Integza did looked awesome.
@TheAshric
@TheAshric 3 жыл бұрын
It's been a while since we've seen you clean your mat. Very happy to see that make a comeback
@jonny555ive
@jonny555ive 3 жыл бұрын
I see a post from Peter I hit like, THEN I watch 👍👍
@adrenalinemadness3340
@adrenalinemadness3340 3 жыл бұрын
Honestly this is so interesting, I feel this is where your channel should go, cast items that people normally have in the house with resin and see if it works
@dannyhale7645
@dannyhale7645 3 жыл бұрын
I'm thinking this stuff would make some cool slugs for another Taofledermaus collaboration.
@B_Skizzle
@B_Skizzle 3 жыл бұрын
Been a while since we got a good rubber mat peel. This might be the most satisfying one yet.
@mattiviljanen8109
@mattiviljanen8109 3 жыл бұрын
"With a couple large amounts of this in here" Ah yes, the specific quantities! Just like my mum when she bakes!
@johnp1806
@johnp1806 3 жыл бұрын
A good revision episode and a second secret mat cleaning. Call it a win, even if the projects failed.
@jbaby362
@jbaby362 3 жыл бұрын
It's so weird that Nothing worked, we didn't learn anything but it sparks curiosity
@Ruthavecflute
@Ruthavecflute 3 жыл бұрын
We learnt that none of thouse options worked. Knowlege about how not to do something is still knowlege.
@carolbuzelim
@carolbuzelim 3 жыл бұрын
I love the chaotic energy of your videos
@AnomalousZoologist
@AnomalousZoologist 3 жыл бұрын
I have the *worst* memories associated with Fiberglass. I wish it failure. It shall not be my friend On the other hand Iron shavings come with a lot of good memories, so I hope it works :3 Spectacularly absurd as always Mr. Brown. Keep it up And a mat cleaning too? *YEEEES*
@Scars_Remind_Me
@Scars_Remind_Me 3 жыл бұрын
Hahaha yes! I love that you did the resin mat clean up again.
@Isteak80
@Isteak80 3 жыл бұрын
"What did we learn?" "Nothing."
@multiairoh1
@multiairoh1 3 жыл бұрын
I’m adopting this as my life motto.
@RobertStoll
@RobertStoll 3 жыл бұрын
Lol "Don't make tools out of resin"
@mikeak7331
@mikeak7331 3 жыл бұрын
I appreciate the effort you took to do this. Very fun to watch.
@matthewjones7935
@matthewjones7935 3 жыл бұрын
Break the drills, screws and nails up into pieces and cast and turn them into a bowl?!?!?
@LostWhits
@LostWhits 3 жыл бұрын
I want to see rainbow coloured screws floating in a crystal clear bowl.
@fuchsfarben
@fuchsfarben 3 жыл бұрын
Seeing the iron shavings screw work, everybody getting excited and then watching the top break off was some textbook comedy gold :D
@SeraphimKnight
@SeraphimKnight 3 жыл бұрын
That injection scene definitely had me a bit uncomfortable, like you were artificially inseminating giant alien grubs or something 😂
@eminakostic3406
@eminakostic3406 3 жыл бұрын
Last video when he made that awful mold I was thinking it looked like it belonged in a different kind of video and this one r e a l l y reinforced that.
@jessicasanford89
@jessicasanford89 3 жыл бұрын
This was very fun to watch. Would love to see more videos like this
@AnesidoraAston
@AnesidoraAston 3 жыл бұрын
When you have to do weird shit or you'll explode.
@floriannadler
@floriannadler 3 жыл бұрын
Aaahahhahahaa, I can't even tell you why, but that dry humour had me laugh so hard :D Thanks for that!
@Joemgrace1990
@Joemgrace1990 3 жыл бұрын
I wonder if a rising casting nut driver would work Or even a ½ socket.
@SleepyPitou
@SleepyPitou 3 жыл бұрын
"ok we need a 2" deep hole peter, can you do that?" "Sure, let me grab 16 drill bits real quick" "What?"
@Bulbassador
@Bulbassador 3 жыл бұрын
Man, you just make some of the best content on youtube. Thanks!
@IronOxcide
@IronOxcide 3 жыл бұрын
1:14 he said my name. I'm famous.
@BuildingHP
@BuildingHP 3 жыл бұрын
After the last video and this one it felt like that last drill bit that worked for a solid 1/8 inch divet was a VICTORY
@Anaerin
@Anaerin 3 жыл бұрын
Iron Oxide is iron, sure. But a more accurate description of it would be "Rust".
@joshsmith4488
@joshsmith4488 3 жыл бұрын
We learned it’s fun to watch you try new stuff. 😆
@cheddersnevets4106
@cheddersnevets4106 3 жыл бұрын
5:35..."peel porn" as Christine from Simply Nailogical would say...
@Tooobuhz18
@Tooobuhz18 3 жыл бұрын
No h
@goransolheim8772
@goransolheim8772 3 жыл бұрын
Definitely learned that this should become a new series find the best composite tool materials
@supersneakyshrub3975
@supersneakyshrub3975 3 жыл бұрын
The last time I was this early to a video the resin hadn't set.
@vickiejenkinson2468
@vickiejenkinson2468 3 жыл бұрын
I love watching your videos! You're such an honest person... to yourself and us. You're fun. I laughed a lot during this video. Thank you for the belly laugh! Say hey to your wife. She adds to your videos! Stay safe, Vickie
@nemo4907
@nemo4907 3 жыл бұрын
Like Edison, you've learned how not to make the intended object.
@97BlueHaven
@97BlueHaven 3 жыл бұрын
I work on boats and a few manufactures reached out about filling holes in fiberglass easily and strong with fiber reinforcement. What you need is called milled fibers and it's almost like a powder fiberglass to mix with resin.
@MayMetalProductions
@MayMetalProductions 3 жыл бұрын
I've never been this early before
@pawwolski
@pawwolski 3 жыл бұрын
4:58 "I don't know. Things aren't going EXACTLY to plan." Story of my life. haha
@cori0420
@cori0420 3 жыл бұрын
What did we learn? NOTHING. No not nothing. Resin makes horrible tools lol 😂
@sophiegrey9576
@sophiegrey9576 3 жыл бұрын
We learned that from the last video. This time we learned you can't even force resin to make a decent tool.
@cattunger
@cattunger 3 жыл бұрын
I love your videos, always something to make you smile.
@lucasforney850
@lucasforney850 3 жыл бұрын
I found your channel only a few days ago but I like it your videos are short yet feel long at the same time and they are easy to follow keep up the good work
@tahsyr
@tahsyr 3 жыл бұрын
I have got to get myself one of those mats!
@RGVPatriot33
@RGVPatriot33 3 жыл бұрын
Hey Peter, those syringe nozzles are almost a perfect fit to stick lengths of aquarium air tubing onto. I use that setup to microcode my aquarium chemicals, and to spot feed picky fish or corals.
@SqueakySwingsMusic11
@SqueakySwingsMusic11 3 жыл бұрын
i'm a huge fan of your videos but the part that gets me every time is mrs brown's reactions and commentary!
@IdealIdeas100
@IdealIdeas100 3 жыл бұрын
Mold the nails and screws with the head at the bottom of the mold and fill them in at the tip of the screw/nail instead so you can preserve a nice head to use. You can always file down or tweak the tips back to what they should be.
@joshr1074
@joshr1074 3 жыл бұрын
I really like the family aspect of the channel
@MrFingerBobs
@MrFingerBobs 3 жыл бұрын
That was excellent, and it's given me a great idea for attaching the rear seat to my new trike. I was thinking about using magnets somehow, but now I reckon, if I fix neodymium magnets to the body, and then make the seat base with iron oxide impregnated resin that should hold it nice and strong, with no obvious fixings.
@elizabethgodwin7679
@elizabethgodwin7679 3 жыл бұрын
"What did we learn?" "Nothing!" Mrs. Brown is the best.
@carrieon2912
@carrieon2912 3 жыл бұрын
I’d love to see you try painting resin onto dried plants, like flowers and leaves to see if you can make them solid and sturdy
@annemariepedersen9220
@annemariepedersen9220 3 жыл бұрын
I know you've tried resin shavings in resin, but what would it look like if the resin shavings came from dyed resin?
@brinnzen.4959
@brinnzen.4959 3 жыл бұрын
i’ve been waiting for another resin mat cleaning!
@gvanvoor
@gvanvoor 3 жыл бұрын
I don’t know if it’s the case where you are as well, but where I live, fibreglass can be bought in a non woven form and smaller strands (the intended use is as an additive in plaster or concrete). Probably handier when you want to mix it with resin...
@kaleyhepp8078
@kaleyhepp8078 3 жыл бұрын
Man these new fleshlights are looking crazy.
@yelenaz9429
@yelenaz9429 3 жыл бұрын
I have watched this channel for years, yet watching fiber glass being shoved in a mold is the only time I have felt that the show is...suggestive. XD
@cheyennecats
@cheyennecats 3 жыл бұрын
i love you and your wife's interactions when watching the final results, you two are so sweet ♥
@defrozendonut8715
@defrozendonut8715 3 жыл бұрын
Thanks to your videos Peter I made my first knife handle which I made out of an old baseball bat
Making Rose Micarta
13:45
Peter Brown
Рет қаралды 175 М.
Resins dirty secret?
14:47
Peter Brown
Рет қаралды 223 М.
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 22 МЛН
Quilt Challenge, No Skills, Just Luck#Funnyfamily #Partygames #Funny
00:32
Family Games Media
Рет қаралды 55 МЛН
This is why I have 17,342 pounds of tools
33:26
Stuff Made Here
Рет қаралды 12 МЛН
Can You Make Resin Tools?!
12:08
Peter Brown
Рет қаралды 889 М.
The Future Is Unknowable
13:52
Peter Brown
Рет қаралды 223 М.
The 400th Day of April: Making a String Pendant.
10:13
Peter Brown
Рет қаралды 177 М.
Handmade holograms are really weird
12:00
Steve Mould
Рет қаралды 2,4 МЛН
DIY Supermaterial Could Save You From Heatstroke: Salt based PCMs
28:11
NightHawkInLight
Рет қаралды 2,3 МЛН
Giant Dandelion Sphere | DipIt #36
12:55
Peter Brown
Рет қаралды 217 М.
The Tale of Mr. Naughty Bowl: A Dye Trying Experiment
16:30
Peter Brown
Рет қаралды 169 М.
The Iron Sphere | Dipit#30
13:09
Peter Brown
Рет қаралды 335 М.
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 22 МЛН