Resin with me | How to make Dog Tag using Resin and Vinyl Sticker

Hi! It's Maricris from Maky's Craft.
Welcome to my channel.
It seems that a lot of you guys liked my previous video where I made a resin dog tag.
I got a comment to use a vinyl sticker and here's how I made it. It's so much easier and saves a lot of time❣
I would appreciate if you will subscribe and like this video. :)
Can you also leave a comment below what design you want to see next? And if you have questions you want to ask.
Connect with us:
Facebook: makyscraft
Instagram: makyscraft
Shop at: shp.ee/da89nkw
DISCLAIMER:
I do not own any music in this video and no copyright is intended.
Song used:
Track: Life Goes On (BTS)
Music provided by KpopNoCopyrightMusic
Watch and Check Out: • Video ​
Source: MRIR
License: creativecommon...
#resindogtag #resincrafts #resintutorial #howtoresin

[@itsmeh2407]

Thank you from the bottom of my heart I wanted to make these for my loyal grooming clients! Thanks so much

[@sticknpeel]

Awww you're so sweet!!! You're welcome ♡ for sure your loyal clients will love them! 💛🐶

[@Kakes6817]

Hi, I'm doing the same thing making for loyal regular clients I'm new to this hobby. What is the best resin to use?

[@Kakes6817]

As a groomer it's fun to come up with unique ideas for them Let them know they are appropriated for their Business.

[@kattiapadilla3107]

Donde se consiguen esas letras

[@dvlslittleangel]

I know this video is 2yrs old and not sure if you are still making these or have a different technique, but when applying ANY lettering whether stickers or using a cricut, use a grid mad or a piece of graph paper. It helps you find the center AND helps with making sure the letters are straight so you don't have to handle the tag or the letters too much!

[@sticknpeel]

Thank you for the tip! I dont do resin anymore but this is a great tip if anyone see this video! 🩷🩷

[@eclipsechatters]

​@sticknpeel i know you don't do resin any more, but would you know if i do the same steps with uv resin?

[@sticknpeel]

@@eclipsechatters hello! For uv resin, you dont have to mix two separate liquid and you can use it as is. You need to cure it with a uv lamp. Then you can do the same steps like putting letters, dome it with resin then cure in uv lamp..

[@eclipsechatters]

@@sticknpeel ok, thank you!

[@sticknpeel]

@@eclipsechatters sure!:)

[@54321subji]

You did a grand job thanks so much for showing everyone 🎉😊

[@sticknpeel]

Aww thank you!

[@leowys6889]

you can wet the surface slightly with water for easier positioning. after it dries, the sticker will stick well

[@sticknpeel]

Thanks for the tip!

[@dannyheavymetal1149]

Thank you so much this save me so much trouble!!

[@sticknpeel]

Happy to help! Thanks for watching 🥰

[@fedrasdesigns7]

Good job 👏

[@sticknpeel]

Thank u!

[@mohaganeyramsey1073]

Could you list all the items that you used

[@pringcaidea4121]

Hello po been looking for an alternative idea in howi put decals on dogtags.. Thank you so much for your video.. 😍😍

[@sticknpeel]

Wow im so happy nakatulong po ang video ko sa inyo 😍

[@lisamorales81772]

Use a vinyl cutting machine like Cricut. They will be aligned and even, plus go on all at once.

[@pringcaidea4121]

Thsnk you so much

[@sticknpeel]

@@lisamorales81772 yup that's right! It will be easier. Unfortunately, I don't have a cricut machine hehe

[@lisamorales81772]

I know they are expensive! But how I got mine was on HSN or QVC. I was able to do 4 or 5 smaller monthly payments, very affordable like that.

[@Lea-we4tp]

Love these so much !!! What do you use for the doming ? And how long does that take to dry ?

[@sticknpeel]

Hello! I use the same resin from the base, you can wait for a couple of minutes so it would be tacky, perfect for doming. For the drying time, I also waited for 24 hours, it really depends if it's not yet fully cured, it will be extended.

[@samkingfishersujj8054]

Really nice

[@sticknpeel]

Thank you ♡

[@anadeleon6885]

Hi good day may i ask what is the size of the vinyl sticker that you used?..

[@squeakyboo]

Do you not fill the resin mold all the way or does it just look like you don’t? I have some dog tags I need to make and I love your technique! If you don’t fill it all the way, I imagine it’s so the piece doesn’t end up too thick once domed?

[@sticknpeel]

Hi you're right! I don't fill the mold all the way so once I dome it, it won't be too thick, and i think thin dog tags are good for small dogs so it won't be too heavy for them (i think hehehe, just my opinion)

[@user-pw9jj3hv3z]

I love it and I have a classmate name ashly😊

[@sticknpeel]

Thank you!

[@elirobcarp570]

Un ginamit nyo po pang doing same din po ng ratio ng pag mix ginamit sa pinagmold.

[@sticknpeel]

Hala sorry now ko lang po nakita nyo sa comment. Yes po, same ratio.. pero mas konti labg kasi thin layer lang ang need for doming

[@crispycastillo5174]

Thank you so much for the nice video. Where can I buy all the materials?

[@souvenirs210]

Pourquoi il y en a qui ponce la résine ? Vous, vous ne l’avez pas fait et c’est très beau

[@nathaliecorre6183]

Wow nice. Where did you buy the vinyl sticker?

[@sticknpeel]

Hi thank u. ♡ i searched someone who's making customized vinyl stickers on fb and shopee. Bought mine in shopee 🥰

[@Kakes6817]

Did you use regular epoxy as top coat?

[@sticknpeel]

Yes!

[@namithalanka6846]

Heyy so some people want their numbers as well on one side of the dog tag and the name of their pet on the other side. How do I get to put the number? It’s so confusing. Btw the tags are beautiful 😍

[@sticknpeel]

Thank you! You can add a small amount of resin and add the numbers. Wait for it to cure, make sure to dome it after so the numbers wont come off. Once cured, do the other side. I suggest to use a fast drying resin so it wont take too much time 🥰

[@pooja17anshu]

Make video of measurements also..how we have to take

[@gabrielalermaoliver4971]

Excuse me, where do you bueno the stickers?. Congratulations

[@sticknpeel]

Hi! I have it customized.

[@victoriapasxalidou8789]

On the top what do tou use ?? The same resin as the base ?

[@sticknpeel]

Yes, the same.

[@Kakes6817]

What type of resin do you use? I have used some & deal with alot of bubbles.

[@yujona1]

Donde se consiguen las letras y como se pueden averiguar

[@chantalleledesmaa]

I was wondering where i could get the vinyl letters you used?? Those are the perfect size i’m looking for or if you could tell me what size they are??

[@yourstrulydre2852]

Hello I believe they use a cricut or other cutting device and measure the tag to get the measurements! Some sellers might be able to sell you some on Etsy. I know this is late but I never saw any responses

[@Viv.w88]

Hi, may I ask what material you use for doming? is it resin ? thank you 😊....

[@sticknpeel]

Yes it's also resin. 😊

[@Viv.w88]

@@sticknpeel okay thanks😄

[@BG-gy5of]

Where did you get your vinyl stickers?

[@sticknpeel]

@@BG-gy5of hi. I have it made from a friend. She uses a machine to cut it

[@mauralisette652]

hey where did you get the rings from ?

[@sticknpeel]

I bought it from Shopee.

[@alexandrahindinger5113]

Hi! Do you do anything to seal your resin dog tags after you apply vinyl to them or do you just leave them go after that? Thank you! ☺

[@sticknpeel]

Hi! I seal them with another thin layer of resin.

[@rajnisetia9599]

Hi where can we get these vinyl stickers from?

[@sticknpeel]

Hi. I have it customized from a friend who has a cricut. I'm sorry I cant share any link for it.

[@rajnisetia9599]

Oh no problem.I thot these are available online. One thing more, this video is apt for beginners like me. 😊😊

[@sticknpeel]

@@rajnisetia9599 thank you so much! 💗

[@jxssicamunoz]

Where you buy the letter

[@TheGyna1]

New subscriber here, dog tags gorgeous but the items you used for mixing the resin in have definitely been used a few times lol. I always clean mine out after every use.....looks a more professional on camera. Not done any resin videos yet anyway, I look forward to seeing your future videos 👍

[@sticknpeel]

Yess! Ive used it several times already lol. I'm just having a hard time removing the resin when it's hard already hehe

[@TheGyna1]

@@sticknpeel it usually just comes away on mine, then I pick all the bits out and then use a baby. So what's your next project ? 💙💛

[@kiwisaladcortez4593]

Can you let it cure completely before adding the vinyl?

[@sticknpeel]

Yes. You need to make sure it's cured otherwise it might ruin your base (like fingermarks, etc)

[@kiwisaladcortez4593]

@@sticknpeel Thanks so much for taking the time to send some knowledge my way :) Fingers crossed my first attempt is a successful one. Thanks again and have a lovely day ❤

[@sticknpeel]

@@kiwisaladcortez4593 good luck!:)

[@glchild251]

Where did you get your vinyl lettering from?

[@sticknpeel]

Hello. I have it cut from a friend who has a cricut machine.

[@KareenOhTV]

pwede po malaman ang measurement ng part a and part b?

[@sticknpeel]

Depende po siya sa brand. Mostly si part b is half ni part a.. may mga fast drying din na same ng amount si a and b..

[@Ana-lo1wu]

Que material son las letras?

[@sallydeclaro4831]

We're I can buy materials?

[@Whitsr]

Do you dome what most would consider the "back" then with the lip from the mold? The part facing you when you pour?

[@sticknpeel]

Hi. Im doming the front part but not the back..

[@Whitsr]

@@sticknpeel No no I get that. But do you consider the front of the shape to be the bottom of the mold (sitting on the table), or the part that faces you while it dries? To me it looked like you put the vinyl on the part that faces you while it dries, then of course dome that.

[@sticknpeel]

@@Whitsr ohhh. Im using the side facing to me as the front of the tag because there are times that if you will not fill up the mold, it will not be flat. There are parts that are sharp.. tho you can fix that as well.

[@sticknpeel]

@@Whitsr i hope i answered your question. Hehe its hard to explain it

[@Whitsr]

@@sticknpeel thank you!! :)

[@nicky9501]

Love these. How much do you sell them?

[@ninovaldemorocabugawan6605]

Sang shop po nabili yung mga sticker?

[@carmenaviles779]

I have the small mold and I am having problem with the length and the width for the name. How do you do the name? Measures, thanks 😊

[@sticknpeel]

Hi! I always start in the middle and count the middle letter of the name (if i explained it correctly) hehehe good thing most of the dog names are just short. Butif the name is long, like the baby girl in the video, i actually redo it several times. I stick and remove it if i cant put it in the right place.

[@sticknpeel]

I hope this helps. :)

[@baleighandsalem8093]

Where do you get your stickers from?

[@darlahpotechin1668]

can you make these double sided name on front and phone on back? Where do you get the molds?

[@sticknpeel]

Hi yes you can add the name both front and back. And i got my mold in our local shop here in my country.

[@vanessa.85]

You can get these molds on Etsy.

[@KareenOhTV]

paano po ang measurement?

[@rachelcerezo7347]

Hello, pwede po malaman saang shop kayo nagpapagawa ng mga letters? TIA

[@sticknpeel]

Hello. Sorry hindi ko na po siya mahanap kasi sa fb ko lang siya nakita and matagal na po yun.

[@jacquelinemartinez4380]

Donde se consiguen esos moldes . Hermoso trabajo

[@jxssicamunoz]

Amazon

[@pooja17anshu]

After doming how long we have keep...same 24hrs

[@sticknpeel]

Hello! Yes. 24 hours 😊

[@tridiawigley760]

Hi what do you use for doming?

[@sticknpeel]

@@tridiawigley760 hi. Just resin.

[@paulinerichellesaunar8560]

Hi! Pwede po makahingi ng link san kayo nag oorder ng stickers? Puro customized name stickers nakikita ko sa shopee... TIA!

[@sticknpeel]

Hi! Sorry matagal ko na sya nabili and sa FB ko lang sya nakita. Hindi ko na mahanap kung kanino.. sorry po

[@elirobcarp570]

Ano po ratio ng mix nyo po thank you

[@sticknpeel]

Hi. 1:2 po. Pero depende pa din po sa instruction ng brand ng gagamitin nyo.

[@anythingaboutlife7827]

anong size ng letter na gamit mo sis?

[@giulianauy9937]

hi where did you buy the paw frame?

[@sticknpeel]

Hi. I got it from our local online shop called shopee

[@chantalleledesmaa]

You can find it on Amazon as well i’ve seen them there

[@elirobcarp570]

Kapag po ba omorder ng ganyan set na?

[@sticknpeel]

Per piece po 🥰

[@aswineee_]

Is it water proof

[@sticknpeel]

I sealed mine with another coat of resin to make sure it won't strip off 🙂