💥Face ID Repair REVOLUTION! DOT-Projector fix with AY A108 Programmer (NO SOLDERING) - Dr Ben

[@b.a.celectronic]

Your the only guy that has a problem solving phase which I love . Good way to learn .

[@RESQREPAIR]

Thanks mate ❤️

[@julio8010]

Men just got into your channel. Great explanation, thanks for explaining all the thing like how it works and that. New subscriber, from Mexico. Hope you recover soon

[@MobileService365]

Please answer where do you buy stand for your camera. Thanks, respect from russian repair service.

[@joemoonraker]

This guy is great. He was already done, plus hes sick, yet still, hes going to teach you all the way. Thank you brother.

[@eddierohdes1099]

5years and counting following this great man and his beautiful Kids

[@RESQREPAIR]

Thanks mate 💯❤️

[@cheeseface20004]

Great video. It would be nice if the tool could allow you to read/write data from a physically damaged camera/dot projector module onto a new module. This is great if the dot projector is faulty, not so great if the entire module needs replacing. Mine arrived today so just need to get a phone to work on hahaha

[@rancillinmontgomery2480]

Can I read from old flex to a new flex replacement without tag on flex.

[@superhero1]

Is there any limit as it says 2 activations remaining or 10 cloud burns? Do you need to purchase that after you used these?

[@jungletechsolomonislands]

Your explanation is crystal clear my brother. I need this new and easy method ..hopefully will get this tool soon. Thank you Sir

[@RESQREPAIR]

Thanks mate ❤️

[@ROFT]

I already had a JCID V1SE programmer, so I sold that for more than I bought it for, and bought one of these with truetone boards for almost half the price of the V1SE. 👍

[@user-ew3hx8wd3l]

Do JC programers do the same things as AY now with their flex devices? Do they work as well?

[@user-xg9vb7le4p]

I used ay108 to repair the face ID of iPhone x. Face ID has been activated. However, when I start setting up my Face ID, I can't set up my Face ID. Set it up later.A pop-up window appears. How should I solve it?

[@vicktorcyprus21]

Can you make rear camera fix from xr till 14 AY108 MESSAGE fix please

[@fieldtech200]

best for beginner i am also beginner after this tool i repair face id

[@RESQREPAIR]

It’s easy to use, yes.

[@Skangster76]

Metaltool and battery, jeeeesh :)

[@xxthemagicherbx1730]

Whats the difference between the ay a108 and jcid?

[@Muhammedali-h4h]

How many volt to connect in power supply

[@ramshad18]

What to do if i used 2 activation where to get more

[@ys4115]

What I want to do is truetone but don,t have a genuine display I can't download the truetone file. I get a download 1.8 error. Please tell me why. I'm really in trouble. The system I'm using now is * AY108 * windows10/64bit computer *

[@frromzi9671]

si tout l'operation c'est bien passé mais que face id refonctionne pas ? comment faire

[@vegardb]

Does anybody know what "I2C Break" means?

[@okafordaniel7103]

Thanks so much for the video and Please I need help after doing everything Face ID reading wan Normal but after I fix the phone back then the face I di started to say not available then I tasted again with the programmer then now am getting the A and B abnormal I don’t know if I damaged the flex in process please help me

[@MrApplePieDude]

Great Video! For face id issues ('a problem was detected with the True depth camera' message in face id settings ) How do we know the issue is with the dot projector and not with the other components that face id uses? thanks!

[@RESQREPAIR]

Learn some more about diagnostics ☺️

[@Haries-eg5vq]

any solution for I2c break

[@dmckinney6815]

1) plug in flex, plug 108 into computer 2) hit test: everything says abnormal except NTC & I2C, they say normal 3) then I hit back up, that’s successful 4) plug a108 into power 5) then I hit activate, the process starts then I get a message that says: “Abnormal, please remove extension flex cable, or use chip to repair” How do I resolve this issue? Is there a support forum ?

[@krezycheri]

Same here, have you found a solution?

[@convertinogsm1946]

Which one you would recommend? Like which brand is more reliable in terms of shipping tag on flexes and overall performance? Please if you could answer as I am struggling to find a good brand to work with for this kind of product.

[@chinaphonefixteam6300]

A108 BOX Restore programmer allows you to read and write information about Apple iPhone's battery, Face ID, and other data. The battery detection board and the dot projector detection board are compatible with our phone repair programmer.

[@durnin6765]

Здравствуйте!!! Вы можете по-подробнее снять видео по замене аккумулятора айфон 11 для программатора AY A-108, за-ранее благодарен.

[@icare-resq]

Hello master, how to solve little lower / little higer, all steps are correct

[@rspaulding]

Is there a non-solder method for a damaged infrared sensor flex?

[@igooro777]

Shoot a video about the battery with a programmator ay a108

[@YousefNofal]

It can fix the true depth problem only is that right!

[@stephenhill5291]

Hi great video I'm having n issue when it comes to connecting the ac power then click activate it keeps saying already activated but its not any ideas would be great ?

[@gloryhub685]

Pls how can I get this? I stay in Nigeria

[@Moblie.Phone.Service]

I have Meijing matrix flex cable can use with Ay 108 box or not ??

[@Ori_K]

i have an iphone xr and i buy a new logic bord/motherboard and when i install it everything it was alright but the face id doesnt work and the originaly battery says is not genuin if i do the same procedure like you will it work bcs the face id it was with the old motheboard and i put new motherboard with the old face id

[@chamaralakshan1872]

Is this programmer working with iphone 13 pro max??

[@MposhaOfficial]

12:19 Yes, video with exact technical details needed, please

[@nanagyamfi6778]

Hello boss, please I want learn this method and I’m in Ghana so how can I go with it and how can I get this tag on flex

[@ibera4445]

does this work for icloud lock phone when we change the chipset on the motherboard and after the id doesnt work can this method fix this probleme ? tanks

[@iBoyLPs]

Thank you for the very in dept information about this vaguely discussed topic. But I have some doubts. How likely is it, that the dot projector/ infrared camera still works and I can read the data on the Romeo (?) chip after a Face ID failure? What causes an iPhone to be in such a condition as in your example? In my case, I have a water damaged iPhone 12 and I’m not sure how to find out if this method (which isn’t quite inexpensive either) will work or not. Therefore I’m very unsure about buying a device such as the AY A108 or the I2C I6S.

[@iBoyLPs]

Also, in my opinion you could do another video talking further about the Face ID technical aspects (referring to 19:00). Id be very interested if there is any possibility to repair the ir camera as well. I have watched your video about the flood illuminator already but maybe you could summarise what’s possible to repair at this point and what is not. Id also be interested about apples repair method, what will they do when I send my device in.. thanks in advance !

[@RESQREPAIR]

Hello! This is extended material and we will only supply that in our paid courses. Sorry bro.

[@VladislavBaglai]

@@RESQREPAIR can I buy somehow only the video materials from your paid courses? Because I can't be physically present on your offline courses. Thanks!

[@mnt0001]

I phone 11 pro after screen replacement face id not working why...can you suggest me what i do

[@hasinthamadumal7275]

I2c short Face ID can this machine use fix without soldering???

[@Marek21]

Very nich video ! Thanks. Btw how do you know about brands like JC etc. that they started producing this tag on flex ?

[@RESQREPAIR]

Hey. I’m in connection to all of them and they already announced. You can already order 💯

[@game.generation]

Good work can you do for iPhone 12 pro max plz

[@npf21]

Wait so could this work if I accidentally got water damage to the dot projector? Long story short my iphone 11 pro max facing down with a protector was facedown on my nightstand and the condensation from the water bottle with ice dripped water and got into the speaker mesh into the dot project i suspect because the front camera has very small droplets around it. trying to find phone shops to fix this in saskatoon canada but no go...

[@michaelmccrudden2532]

Hi dr Ben Can I use i2c and flex to repair iPad Pro 3 ?

[@vicktorcyprus21]

how to make software in english language i have its in chinese language

[@Spoonz2100]

It's possible to do the same, with i6s programmer? just buy the flex tag?

[@9048778]

Hi from Russia (PRO-mobile).

[@islamcoherencepertinence.7226]

Thank you from France ;-)

[@RESQREPAIR]

My pleasure.

[@CarlosHugo86]

do you know where can i get more credits to activate, because i keep getting errors when activating the flex

[@charltondacres72]

do i have to use the original face id for this to work or

[@sebastianbenjaminsson8265]

Isn’t the flexcable re-useable, like battery flex?

[@cillianbyrne1462]

i just keep getting the error , LUMINESCENCE ABNORMAL every time i cloud burn the tag ? any help appreciated

[@Julien-my1lk]

Same did you find a solution at the end ?

[@cillian1983]

@@Julien-my1lk as far as I can remember in that particular case the fault with the face ID couldn't be fixed with this method , if you look at the front facing camera on the iPhone in question with an android camera do you see two or one red dots ? you can't use an iphone camera as it has an inafred filter

[@Techno_crazy083]

We’ll explain

[@praneethjayawardane2910]

Hello bro i did this with ay but still face id says not available? Y is that?

[@jasm5937]

excellent explanation!! But if I want to buy at the SMARTPARSTAR store I can't because I live in Spain It can be fixed ? Thank you

[@RESQREPAIR]

Just write an email to [e-mail] and we will handle this today.

[@hambaberdosa6474]

What tool do you recommend??

[@ninbuddha1]

Cloudbackup menu not working how should i do 🙏🏼

[@asrmobilerepairstherefurbi7334]

Bro , thanks for the video is very complete. I have an 12 pro max with the yogi in short circuit i have move to other flex and still in short .There are any solution for this?

[@RESQREPAIR]

Hey. Sorry, but i don’t understand what you mean.

[@asrmobilerepairstherefurbi7334]

@@RESQREPAIR ok bro , the face id part in the front speaker is in short circuit ,is any solution for repair the face id if this part is short circuited?

[@saikasarla5750]

Thk this method is revolution 😅

[@RESQREPAIR]

Sure mate 👊💯

[@Jhuang114]

How can we tell if this is the issue with Face ID? On my iPhone 12, Face ID is disabled (as shown in the video) and when trying to take a Portrait Mode selfie, it keeps saying "Move farther away." Is this likely an issue with that part? Is it likely repairable through this method?

[@abctips3034]

if the front portrait cam says move further then its probably the dot projector

[@ramshad18]

Hi been

[@waynetaylor2784]

Do the tag on flex work with jc 1vse ?

[@Rob-wx2rq]

What is the best way to deal with broken prism glass?

[@RESQREPAIR]

Replace the prism bro.

[@richarddevivar5377]

Thanks Doc Ben

[@Fear-pk2hu]

this one works with the 13 pro ??

[@DM-wu9ik]

When prompted to “Activate” and “Burn” why did it say you had a number of attempts left? Will the manufacturer be charging use per Activation and Burn burning services?

[@RESQREPAIR]

Yes, it is mate.

[@DM-wu9ik]

That’s not good. If we buy the hardware to fix Face ID that should be it. We shouldn’t need to pay for a service on top of that as well.

[@phoneandcomputerworld1750]

This is a very good question as the people who are currently selling this device do not mention an per activation cost etc.

[@KimoKimochii]

I think he means each flex can only be programmed a number of time, i’ve seen this before on some face if cables. can someone confirm?

[@WalmezTekno]

It will work also after factory settings, hard reset, iOS update? Thx

[@RESQREPAIR]

Yes.

[@kindusimegnew6860]

Nice work

[@celltech1138]

What if we completely changed the dot projector system? Will it work as well

[@RESQREPAIR]

Like explained in the video - no !

[@nanagyamfi6778]

And where can I get the AY A108

[@innovatrixrepairs5269]

Thank's for the info!

[@RESQREPAIR]

My pleasure mate

[@bigtreeproductions]

Is it the same process with JC V1SE?

[@mastertirur930]

Any update 😢😢

[@RESQREPAIR]

You need to wait for an update. But it will be almost the same.

[@bigtreeproductions]

Danke schoen!

[@benchambers6742]

If we have to replace the front camera assembly, would the tag on flex activate another OEM front camera assembly to allow face ID to work?

[@RESQREPAIR]

No 🥹

[@austineoloche7059]

What programmer or method can I use to setup a brand new OEM front camera assembly on another iPhone ! Or can I read from another front camera assembly on a different iPhone into my own?

[@romaingardes8481]

Hi, I can't find the software in France. Could you please send me the link ? Thanks a lot ! :)

[@RESQREPAIR]

You can find it on the website of the manufacturer.

[@eddierohdes1099]

So sorry for the sickness

[@RESQREPAIR]

No problem bro. I will recover within a few days.

[@Jzx110]

Get well soon bro🤗🤗❤️❤️

[@RESQREPAIR]

Thanks bro.

[@ericvandebroeck5130]

Hello, Is it possible with a repair cable from jc iphone xr . this is already replaced en installed and back broken . I dont have original flex and dot projector is assembled on jc repair cable Thanks

[@RESQREPAIR]

If you have the original dot with Romeo ic we can do that for you. But not with Tag on method. Doesn’t make sense.

[@ericvandebroeck5130]

@@RESQREPAIR I have original dot and original cable . But ic chip on dot is broken . What is Romeo ? thanks

[@TheKortexgaming]

Hello, is it possible to change the battery through this programmer? without pop up message

[@RESQREPAIR]

Only with transferring the BMS.

[@Mr.Morkovkaa]

did you test any leakage? I think there will be some surprise (maybe I’m wrong)

[@RESQREPAIR]

I tested some more today, all works fine 💯

[@bootandroid5834]

It's nice video but I have one question u removed flex or fixed inside the phone

[@RESQREPAIR]

Watch the video bro 👊 😍

[@bootandroid5834]

@@RESQREPAIR u fix inside , is every phone need flex or on flex use for many face id

[@alessandrocavara305]

Do you have to Jailbreak the Device?

[@chatersinghubhi]

Its good but not success always. Bec proper placement of flex is most important parts of this repair.

[@jfixtechnology]

if i dont have original dot projector...it is can be repair by this method?

[@RESQREPAIR]

That’s not possible.

[@jeandedon]

merci .bonne soiree de France.

[@RESQREPAIR]

Thanks bro. For you too.

[@ericguegan-dequeiroz1144]

I received this tool the other day and I've got an issue with the software connecting to my phone. A message pops up saying to unlock then trust but the phone does not appear to be connecting to the software. I'm stuck with a useless tool... Any help?

[@ericguegan-dequeiroz1144]

Just so everyone in the same situation knows, you have to have iTunes installed and working for the software to connect to the iPhone, otherwise it won't work... Dumbest issue ever, but well...

[@spasspasov2594]

I'm trying to find the JC version of the cables, but it sems like they haven't released them yet.

[@RESQREPAIR]

Qianli released, MiJing and AY. i2c and JC are upcoming next week.

[@spasspasov2594]

@@RESQREPAIR Great, thanks for the quick response mate!

[@mjfaderway]

Thanks for the info any links guys??❤

[@Cosmozic]

You didn’t explain good enough. What exactly was replaced here the earpiece? Was it programmed while old one is installed in the phone or the new one? All you have been replying to is watch the video bro literally don’t make a video if you aren’t going to answer people questions while the video doesn’t give any clear answers.

[@RESQREPAIR]

If you don’t see or understand what I did here it’s corresponding to a bad skill at your side bro. Sorry. All is explained very clear and if you are experienced enough it’s no problem for you to understand. Keep up man 👨

[@Jzx110]

I’m confused don’t know wich 1 to buy bro .. i2c or this or mijing or qianli😔😔

[@RESQREPAIR]

I would recommend i2c bro.

[@Jzx110]

@@RESQREPAIR thank you brother🤗🤗

[@MrBenzo26]

Hi! Weil das im Video nicht rauskommt oder vielleicht habe ich es auch nicht gesehen: Man kann mit der Methode die FaceID/Frontkamera-Einheit auswechseln, solange man die originale Einheit hat und diese noch auslesbar ist - korrekt?

[@RESQREPAIR]

Nein.

[@MrBenzo26]

@@RESQREPAIR dann versteh ich den Sinn dahinter nicht… wenn man dann offenbar keine Hardware-Schäden-also die häufigste Ursache von FaceID-Defekten-damit reparieren kann? Wozu ist die Methode dann gut? Keinerlei Kritik, top Video - ich steh grad nur auf dem Schlauch 😅

[@leesiphones839]

if the original front camera is broken , does this still work with a replacement ?

[@RESQREPAIR]

No, then you have to replace the cam.

[@morghanet]

Basically, this method transform our FaceID in an Android face detect ?

[@RESQREPAIR]

No. It does exactly the same as a „normal“ Face ID repair. It works like from factory. Watch the video again bro 👊

[@morghanet]

@@RESQREPAIR Ok, is that i just speak spanish and the english i can´t ear, just read but, the subtittle is not perfect, thanks aoy anyway

[@user-rj6dv4iy2l]

Хоть ничего не понял, но было очень интересно

[@B13TECH]

bro whats happen if the dot projector lens burn?

[@RESQREPAIR]

Then you need to replace the prism if it’s burned.

[@jaybug765]

i have iphone 12 pro max my tester said i2c is shorted

[@RESQREPAIR]

I don’t understand that comment 😃

[@jaybug765]

Sorry I got busy with my kids I didn’t finish my reply when I hit post. My tester just like the one you have said that Ic2 is shorted Will the new flex add-on fix that problem or do I have to send it in

[@seblep75]

same issue with 1.2.35 version on XS.... I2C Error (no error with JCID V1SE)

[@seblep75]

OK - have to update the AY108 with batt plate before use the FaceId plate ^^

[@kamenton]

Soldering method looks more durable

[@jacek2]

How many volts does the external power supply have?

[@jaybug765]

from what i found 19.5v 3.33a 65w

[@jaybug765]

CT:9A93CE 11V18H17A this is what I found when I was searching for the power supply I went to AliExpress save a pic. Then turned it black and white And tried my best to read the tag

[@RESQREPAIR]

20V

[@estudiantepedrojoseolivera771]

I can't find the link to download the software

[@RESQREPAIR]

It’s kn the AY website.