Clone DZ03 Face ID Restore Programmer

[@curbdawg3818]

Cool video. So does this mean that there was nothing wrong with the dot projector to begin with? Does the tag-on just force it to work even if it is malfunctioning? How does this effect the accuracy of the dot projector? It would be really great if you could have better lighting for the videos.

[@gercekadam8323]

you r right. we need more information

[@MrBlowmyselfup]

this process fixes the fuse that pops when moisture gets onto the lens

[@nsnz33]

@@MrBlowmyselfup how does it rebuild a blown microscopic fuse with a new flex? what’s the purpose of the power supply?

[@MrBlowmyselfup]

@@nsnz33 it blows a component inside it, if you listen closely you can hear it pop during the process. i'm not sure what it does, but it does work!

[@dandaniel30286]

Will the DZ03 also repair the loud speaker and proximity flex?

[@ifixsmartphone9079]

who is first? Quanli or Mijing? They look identical, even the app.

[@jaymartinez910]

Hi do you prefer the JC programmer or this one?

[@chinaphonefixteam6300]

Clone-DZ03 programmer, repair face ID as easily as repair accessories, even a piece of cake for new beginners.

[@ct91735]

Is there a way to transfer the codes to an entire replacement front camera assembly to preserve functionality?

[@randyseright7689]

Awesome unit… I love it!

[@dschmider]

Hi, great video.. did the flex cable to fit inside the phone come with the kit? I have an iPhone 11 Pro to repair.

[@raya.8963]

I just did all the steps in this video for a 11 pro and am now getting "abnormal " in section "D" of the dot projector. Its seems to have cleared up all of my previous "abnormal" messages except section "D". Does this mean i need to change the flex? Or, do i need to do the new chip replacement method? Or both? And, now that this oem dot projector flex has been programmed or messed with during the process of this video, will it now allow new programming to take place if i am now required to change the flex or replace the chip?

[@FC-mt3gj]

Is this for fixing broken Face ID only or dose this also work when replacing the original proximity sensor

[@coryblk1124]

So you don’t replace the dot projector and just use the existing one?

[@MobileSentrix]

Correct! Crazy Right!

[@benchambers6742]

@@MobileSentrix If we have a bad front camera and want to replace the whole assembly, is there an option to transfer codes to allow the new front camera assembly with a new dot projector to function with the tag on flex?

[@MarkStudent]

@@MobileSentrix I don't understand... How is the bad part reusable now?

[@abdulsaboorqadeer4489]

@@MobileSentrix ? How

[@aginwajohnkennedy1134]

My dot projector not activating 2:05 Non-wire detection, please remove the extension cord, or use a chip to repair it. Please help 🙏🙏😭

[@RiveroA]

Will QianLi/MegaIdea offer a new daugherboard or update for the intersteller one to allow for the flex to be replaced like the i2c6s?

[@kanox]

cloud burn is grayed out on mines. any help?

[@sNaikoo]

What this mean, if IC Data is not IC fusing. How to change that ?

[@iphonetechnicians2031]

Excellent. We would like to see with the iPhone displays.

[@thalley9325]

Hello I am getting an IC2 short message. What can I do? Thanks for any help you can give me.

[@gorra]

Somehow when I install the program and try to open it gives me an error "0xc000007b" ... so it won't open the software...do you have any idea of what happened? or any solution? thanks

[@smartphonerepairwi775]

I followed the steps on this video but it didn’t work. Gave me a device not verified error. It gets rid of the issue once the tag is installed however faceID still shows an issue.

[@letyoscarcornejo5365]

hello i purchased the clone dz03 as well and have downloaded the mega idea from their website the current one but when i connect the clone device to the pc it shows as not connected with red but the clone does turn on but not in the program. Can you please help what is going on to fix the problem?

[@paolo_bartalini]

Hello, my Face ID is broken so I ordered a new Face ID and I'm replacing it with clone dz03. The Face ID that I've to connect to the clone dz03 is only the new, right? Or I've to connect also the old Face ID? Thank you so much!!!

[@mmfix3851]

Are you using another dot projector ? that works or ? the video is not clear.

[@justjavii]

You didn’t watch till the end

[@evablessedtv9022]

Please, if i get a new Camera flex Will it still work ?? Or i need to get a follow come Camera probably from another device. In case the original Camera flex of the device has a cut or damaged .. Please respond to me 😢😢😢

[@vancell6713]

Hi, I am getting an IC2 short message. What should i do? Did i do anything wrong, Please guide. Thank you

[@cprepairslab6465]

Great to get one now for faster Fix Face ID

[@Cosmartot]

Hello please I bought the quanli programmer and am always stock at activation,the dot projector doesn’t activate then I bought the Clone still the same thing what am I doing wrong please

[@aginwajohnkennedy1134]

Olu30

[@tqlla]

Did you use buy the "Tag on Flex" which is like $12.

[@vincen.3590]

What is the purpose of cloud burn?

[@loualiabdelmourhite4608]

Why the activation and cloud back up buttons on the software are grayed out? Can you please help because this tool did not work for me since i dont know why those button are grayed out. Thank you

[@MobileSentrix]

Once you've connected and trusted the corresponding phone to the computer they wont be grayed out.

[@anthonys9103]

Does this work on Mac and Windows?

[@AlexSandro-jw2ll]

Would you have a tutorial, in Brazilian Portuguese?

[@jcreazy]

Does the software require the internet?

[@mraloui2598]

If I dont have the original face id to bacup thé data what we do ?

[@artificier45]

Hi, impossible to register it says please select hong kong server ? do you have the older file ? thanks

[@JohnnyTroher]

So what if a technician tears this flex?

[@MobileSentrix]

Then you'll have to resolve it with the tried and true but difficult method of soldering the dot projector over to another original flex.

[@SamThe_1st]

Will this work to fix the proximity sensor cable.

[@MobileSentrix]

No, but there are other tools that can do that in the market.

[@benchambers6742]

kzbin.info/www/bejne/aGileYCteL2qmMU He will explain this process with the i2C i6S tool and flexes. He explains everything except connecting the tool to wifi, and the fact you do need the original flex in tact. I have seen this tool work in person.

[@DiviNe187]

@@MobileSentrix will you be offering this tool for the prox sensor flex on the shop on short term?

[@joani2732]

Does this still work with ios17?

[@samuelolasemo155]

DOES THIS FIX WATER DAMAGE

[@UnlockNued26]

can be used with out pc?

[@lightdaniel7600]

Can it work iPhone 13 to 14promax?

[@PhoneMagic-rh3qf]

I just get right now and i fix my face id amazing and easy 👍

[@stephen4811]

i tried to register with email ... but it doesnt sent verifaction code ... any solutions ?

[@MobileSentrix]

Please raise your query on [e-mail], we will get back to you.

[@djmii5tik974]

my phone isnt being detected

[@edwinramirezpena5344]

my computer doesn't recognize it

[@JuanCabrera-jt9ms]

where can i buy this

[@indycellsdavid562]

How can I get English version of the download?

[@iPhoneboardrepair]

You'll have to change the language from the top right corner of the software where you see the little earth 🌎 . Click on it and it will change automatically to English.

[@keniderafaelgutierrezmarca9870]

Hola tienen algún video de como doblar los flex ?

[@fazzy192]

Hi thanx team it’s work

[@GeraldKnight954]

verification code never worked

[@sunnycomputer2684]

Clould backup is faded out i am to able to backup

[@MobileSentrix]

you need to connect the phone to the computer and trust it to the computer so that it recognizes it in the program and those buttons wont be grayed out.

[@kevin-juanthomas4185]

il a fait aucun effort pour filmer