Full restoration of old 220v generator engine | Repair and reuse old rusty generators

[@ErniefromhCanada]

Vietnamese miracle. It even works without fuel. The engine shutdown switch is not connected either.

[@ArmandPedroza]

I noticed too, the engine ran without gasoline.

[@SulaimanFahad-tp1jp]

شحضحضحضححضحضحضحضحضحضحضحضحضححضحضحضحضحضضحضحضحضضححضححضحضحضحضح

[@SulaimanFahad-tp1jp]

شحضحضحضحضجشجشجشجشجشجشجشجشجشجشجشجشجشجشج

[@SulaimanFahad-tp1jp]

ضمضكحضحضحضحضحضححضضحضضحضحضحضحضحضحضحضحضحضحضحضحضح

[@SulaimanFahad-tp1jp]

ضضحضحضحضحضججضجضجضجضجضججضضججضجضجضجضجضجضجضجضجضجضجضجضجضجضجضضحضجضجضجضجضجضجضجحضجضجضج

[@MrSanmanbob]

nice work, now you have a generator for power when you need it.

[@dinosaur0073]

Thank you, man. Big different before and after...shining like a baby 👶...😂😂

[@aim....]

Idk I’ve only watched it for first 3 n a half minutes! The wire heads are super clean, shiny or even kinda brand new man! Dropping it right here. No way I’m watching it to end!

[@expo1993]

Well done! 😊

[@burriedhistory]

Awesome. This video made me remember my father repairing all sorts of engines and cars. Thank you.

[@chuckvenable4409]

I've got the same exact generator without all the rust and mess. It helps keeping it out of the elements when not in use.

[@elliswatkins812]

That generator is not running right at all you shouldn’t need a second person to rev the engine up when you apply a load to it

[@anthonielegrange8688]

Just need to adjust the governor for the revs

[@jamescraig5421]

A totally new Lease on Life Bro. Beautiful restoration you just keep up the great work you are doing and I'll keep watching you and enjoying every minute of your shows .

[@thewaronthewest.926]

Great video buddy. You have to be very careful mounting the generator end casing on & even more so the Brush set. Very careful indeed.

[@BobSmith-eq9vs]

The frame on the original find was rusted completely through. Miraculously it was fine later.

[@bilaltechcity8613]

Amazing Restoration...!

[@melvicaraneta3021]

salamat bro.detalyado Ang iyong demo...God bless.

[@Subgunman]

Great restoration with limited resources. Attention to detail by pre oiling most everything within the engine is great but use some wood blocks on the bearings the next time you need to set them in. This is the exact same gen set that Lidl has sold in the EU market, didn't realize it had an AVR module in it.

[@restoration-bq3921]

thank you very muck

[@rezaramadhan6075]

Lksnssn NK u.h N. Y

[@НатальяКостецкая-л5п]

Рм? 0фх

[@ياسرريانلصيانهوتصليحجميعانواعا]

❤❤❤❤❤

[@manae37]

You did a great job and your work is so beautiful

[@hmzhtd]

عراقي 🇮🇶مر من هنا

[@noernero591]

انا عراقي ممكن نتعرف

[@hmzhtd]

@noernero591 الف هلا وغلا

[@3Bosey_YT]

هعهعهعهعهعهع تعليق صارله ٤سنين هستوة واحد رد😂😂😂😂

[@thierrypapion1237]

Excellent Video Great restoration What do you guys adjust your intake and exhaust valve in mm and what kind of Spark plug is used on the 196 cc engine. All trade make the same generator but it is modified to use propane APG 3535 cn

[@Totalrepairsolution]

Work Hard And Win The World 👍❤

[@JoyDee3347]

Wow good job bro

[@cv.sahabatprima]

Good job

[@binhnguyenquannavy2640]

Cái nón huyền thoại. .1975 😁😁

[@tomboman]

Always love it when people spray something like WD40 on a bolt, and then after 2 seconds try to loosen it.

[@misterv147]

Друг, вот ты рукастый мужик!

[@calvinhobbes7504]

God bless you, sir .... that place looked like the perfect venue for a snakebite!!! Plus you set both valve springs by hand. I would have received a cut thumb, gotten popped in the eye - or both.

[@restoration-bq3921]

thank you

[@skhasibul4895]

A

[@MawarniStudio]

a very extraordinary restoration from a condition that is no longer feasible to be an item that is fit for use & sale. cool

[@reedthomas1087]

Beautiful repair. Loved how the new throttle spring was stretched out to fit lol but for real nice work.

[@KUNA_PANDA_SATYASAI_DTH]

Excellent Great Brother 🙏🙏🙏🙏

[@jailsonaraujo5766]

I really enjoyed this kind of content, it's very interesting Da to learn a lot of the mechanics of these power generators just by watching their videos. congratulations on the great video 😊

[@miodragtodorovic7924]

Vlaške. Narodn. Nigre. I

[@qaziqalander]

Great, Very good step by step restoration effort, yet practically simple enough to follow and help people with similar difficult situations, Thanks again

[@restoration-bq3921]

thankn you

[@eliecermora7648]

Quedó nuevecito, que buena restauración.👍👋🇨🇴

Có cái ghế sa lông ngày xưa đấy phục hồi lại xem nào 🤣

[@seedymellon]

Like everything from that part of the world, cosmetics seem to overshadow the real task, and that is the inner workings and working to tolerances that are more important. The only good part of the presentation is the lack of the blurb (in english) of how good and knowledgeable and the all important the begging to "subscribe" which consumes 50 percent of the whole thing.

[@harshabiliangady3211]

Considering where you found it I was expecting a baby cobra to come out. Since you stage so many finds it’s time you got yourself a workbench and torque wrench.

[@ademolasola8298]

Excellent 👍👍👍👍

[@njokudaberechi5783]

Good

[@kassidyjones176]

Easy assembly of legs n wheels. Now charging battery, will try to start it in morning.

[@makshhdjd2083]

هاي مهنتي 😍🧡 علم الميكانيك

[@felixcat9318]

Not at all keen on setting the bearings that way, nor the complete absence of a torque wrench! Adjusting the tappets would be preferable, as would setting the bearings on the outer raceway, preferably with something softer than steel. Nice to see the youngster participating with his father to learn skills. The generator appreciated some care and attention after being abandoned, and I was surprised that all the fasteners unscrewed intact! All in all a nice restoration, with some finesse it would have been great. Subscribed.

[@Skoda130]

Some just need to work with the tools that they have at their disposal.

[@pcfnokia273]

Không thấy thay thế cái gì, hầu như vẫn để như cũ, chứng tỏ máy còn mới, chỉ để lâu ngày bụi bẩn thôi

[@shumailkhan2662]

Very good i really love it♥️

[@restoration-bq3921]

thank you

[@sixrsi3501]

@@restoration-bq3921 b W

[@gurmanaulakah]

Respect 🙏. India 🇮🇳

[@AbhishekOsmm]

Good work 😊😊😊

[@ammiali9979]

amazing restoration ! you are the shief .

[@restoration-bq3921]

thank you very muck

[@Star_KSA12345]

ARE YOU FIXED GENERATOR ENGINE😱😱😱😂😂😂😍😍😍😍😍👍👍👍👍👍👍👍👍👍👍👍👍

[@hamdyhayba3697]

the spray paint not resist the gasolin ..i suggest useing sandblaster to clean aluminum parts ..and you must replace all gaskets and not use hammer to assemble the stator base because the camshaft may be break it .. good jop brother ..

[@romeovidalrodriguez7754]

hola Y acá estamos... Hey Buen Video

[@ابواحمدالقريشي-و1ر]

عمل جيد جدا يا رفاق

[@أُسامةالجوهري-خ7ح]

بس نسى ما خلالها دهن ونفجر البستم بعد عمك

[@belal591]

Nice video dekhe hone ki suchna Palam

[@RESTORATIONOFSCRAPMETAL]

Greetings, Cool project and Great job buddy as always like👍

[@restoration-bq3921]

thank you fou your

[@sghunterr]

Thanks for the amzing video, may I know what is the type of silver paint you use for the Crankcase and engine body? Is it a regular spray paint or is it a type of paint that can stand high heat?

[@robbyboy03]

I am intrigued by the fact that he knows where all the wiring belongs without having labelled them before pulling it apart. Good work though. Well done.

[@martyb3783]

Nice Work!

[@psvyme48paulh45]

Wow so cool 👍 🙏🇬🇧

[@restoration-bq3921]

thank you

[@Mikesorrento3344]

Very nice job.

[@mohd68]

You are woooooow 👍🤔 Tanks boos بصراحه انت روعه 👍🤔

[@marciocanhotinho]

Bom dia! Pra mim é uma honra viu prestigiar seu trabalho, vamos sempre juntos somar e fortalecer nossos objetivos, Conto com você, eu já estou por aqui.

[@edpagan3336]

what did you use to clean the stator?

[@MichaudDaniel]

It's hard to believe it works!

[@a.malsaadoon1712]

Great job..... but you put ( camshaft ) wrong.... Thanks with my best wishes.....

[@bpetnoi1472]

I know these guys are working with limited tools, but to beat the center of a bearing is just asking for a failure of that bearing.

[@restoration-bq3921]

thank you

[@GiuseppeGibilmanno]

you not show when put rear long bolt that keep elwctric rotor and engine shaft together 🤔😂

[@bakrihassan5683]

Good job I love it will done 👏

[@restoration-bq3921]

thank you

[@kiratihicham6234]

وظة

[@maatiraouki9124]

Merci pour l’exercice

[@LZ1SSA]

Ето това е майстор. Браво

[@akpexplorer7940]

It is more like cleaning rather than restoration 😅

[@GGigabiteM]

16:49 - Các dấu chấm trên bánh răng phải thẳng hàng nếu không động cơ sẽ không hoạt động bình thường.

[@aijazkhan4530]

Masha Allahu khairan Wa ahsanan jaza❤❤❤❤❤❤❤❤❤ subhaan Allah subhaan Allah very👍 very👍 good👍 job janab thank you🌹 very much👍

[@andreaswhite7079]

Good job 👍

[@restoration-bq3921]

thank you

[@csimone1986]

You forgot to put the long screw that holds generator to motor crankshaft

[@benaman5606]

This is just cleaning and refreshing not full restore

[@fokinwladimir376]

now i go out ...maybee i finde a generator...

[@tinytonymaloney7832]

I take my hat off to the patience and memory of this guy, I would have just left the thing to rot and buy a new genny, I couldn't remember where all the bits went. Not keen on the method of fitting that bearing, should be fitted using force on the outer rim not inner.

[@JohanyFuragganan]

Well thats an old engine.you should grind the valve to make it better and adjust valve clearances and you did not show how the timing of crankshaft and camshaft.

[@rvarghese3062]

Nice work 👍

[@kittymoako1748]

Sir matanong ko lang po ano problema ng ET1000 na genarator na omaandar lang kong nakaof ang choke tapos pag binokasan m man po nmamatay

[@cheythompson740]

The classic walk through some rubbish and find a generator

[@ehaurader2640]

Cool a generator that runs on fresh oxygen

[@shankarmiyar]

Bolt nuts fresh? They are very very friendly?

[@restoration-bq3921]

thank you

[@makshhdjd2083]

خطأ كبير يرجع يخلي الكازكيت المستخدم 😑 لازم يخلي جديد حتى ما يطك الكازكيت وعندو اخطاء هواي بس يله احسنت التعمير

[@kawaylaw8311]

Can you send me how to connect the ENGINE SWITCH

[@luigicristiani7709]

Find everything ... you !!! but where do you go to look, in landfills, in garages or other public or private places?

[@kenplayz9224]

this is real, now stop disliking the video tell it if there is rust on the plastics

[@thinguyen2095]

Cam ráp sai củng chạy được hay thiệt

[@Twizter68]

Now THAT was one scungy unit to start with!

[@ThuTran-yy5uc]

Tiêu đề tiếng anh ngt xem nhiêu hơn hã chú.

[@VLADIMIR-zk9ry]

Das ist fantastisch!

[@Farm_fab]

New vibration mounts for the generator to the frame will need to be replaced. I hope you were able to use high temperature black paint on the muffler, because if it's not, it will just burn off.

[@ArielVargas-v8c]

❤ saludos desde RD

[@dvchannel93-x1z]

Great 👍👍👍💖💖💖

[@restoration-bq3921]

thank you very muck

[@احمدالرفاعي-ق5د]

كيف شتغل بدون تنك البنزين😏

[@industrialmonk]

I have one problem with this on this type of generator the engine's are almost indestructible but the electricity generators always fail & mostly avr's then the windings on rotor & lastly the stator it would be better/ more helpful to show the electricity generator being repaired as that's the most likely to fail.

[@huntercox1859]

That’s not that old. Was it put next to the ocean? Jeez

[@zafarfarhan428]

Wah g wah in Urdu Excellent" in English

[@chibuikeokafor]

Nice One bro, please what is the name of that spray you use to open the rusted bolts?

[@restoration-bq3921]

thank you

[@Cookie-gd3gd]

You can also use WD-40. Its basically the same.

[@gregjones3660]

will the engine work again next month?

[@Ayva-Erik]

sorry, are there any permanent magnets on the rotor. I am from Turkey.

[@Master34flomaster]

Я думал он его сейчас помоет с фери покрасит и все.с компами они же так делают и работают 😂😂😂

[@neggaaa6]

How did you turn it on without gas?

[@neggaaa6]

Dude u just liked without a response

[@ardypanjul4645]

mantap👍👍

[@المصممحمودي-ح1ه]

استمر حبيبي ❤

[@قناءعائلتناتو]

منين اجه حبيبك غير صيني مادري كوري😂

[@SanDiego_VDubLife]

Think of all the excuses we make here in America when it comes to not having the right tools or equipment. This dude went at it with what he had available and he got that thing running again. Even in his country where most folks would not even think about saving that thing. When you have nothing I guess you gotta make do. These videos inspire not to be such a woose and just go for it. We have everything and more in this country to do the job. Now back to procrastinating on fixing my projects outside. Jaaa

[@dulatip2190]

D

[@chaudoc69]

Hay. Bạn ổ việt nam ? Nhìn đôi dép lào - nón cối là biết ngay !