Restoration Car TOYOTA CORONA rusty - Repair manual Comprehensive restore old cars - Part 5

[@pavelmayorov858]

Перекупы тайванская версия "Не бит,не крашен,вся ровная"😂 За использование резака лайкос👍😂

[@Bankolio]

Болгарка, ленточная пила. Не не слышал 😆👍

[@Dmitry_nvkz42]

Не понимаю что они хотят с ней сделать, кузов мёртв более чем полностью. Но смотреть интересно, лайк.

[@김동은-i6m]

뭐하냐 미첬어

[@김동은-i6m]

멀쩡한 차를 왜다 때려뿌셔

[@jeremytallow1169]

Great work your doing, my only concern is that, THAT car is two cars welded together, (I could be wrong ) a red front end from the fire wall and a white rear end from the front doors to the back. I hope ( I’m sure you will address the vehicle structure before it goes back on the road. On a positive note I’m glad your putting the effort into restoring and showing what people can really do when they put their mind to it and helping to educate the rest of us. Best of luck from the (UK).

[@ianallen2]

These guys have more guts than car restorers of today. In UK, that car would be in pieces in a skip at a scrap yard. I look forward to the rest of these video's.

[@purdy9431]

I'm all for restoring cars but that's just not safe, there's BS rules in the UK I get it but that car without it being just a skin over a new chassis is lethal. It's mostly rust.

[@ianallen2]

@@purdy9431 I saw it flexing when they were raising it up and thought there is nothing holding it together.

[@purdy9431]

@@ianallen2 They cut the roof off as well, even mad max wouldn't drive that

[@ianallen2]

@@purdy9431 I thought they were mad cutting the roof off just for the bit of rust above the windscreen, but in the description, they said it was going to be a convertable. It will still need solid structure even on a chassis. I had to laugh when he hammered the floors out and expecting to go through the metal where there was no rust with just a hammer. lol. They hammer the floors out and gas axe the roof off. I thought they were going to give it a roof chop like a hot rod. lol

[@ianallen2]

@@purdy9431 In reality, this car needs replacing, not restoring. In my mind, it wont be as strong when done.

[@AKWoland]

Операция "утилизация". Удачи в поисках геометрии!

[@ryanhart3979]

I don't think this project should be call restoration, this is way more than restoration level

[@dfgggfg]

Кузовная геометрия передаёт привет двум вьетнамским рукожопам.

[@amilcarmoncada1801]

Poco a poco se camina lejos, felicitaciones por ese esfuerzo que estan realizando para la restauracion de este toyota corona, saludos desde Venezuela.

[@harvi121589]

Hopefully we will watch 50 seasons of this restoration!!

[@pandulajananatha505]

This will the restoration of the decade if you guys pull this off 😅

[@Rupperkus]

Okay gents, I would suggest getting a nice angle grinder to quickly remove rusty panels. So far this is looking great and I salute your attempt at resurrecting this classic, good luck!

[@teknowil]

cut back until you find good metal,,,,,

[@AmigaA-or2hj]

An angle grinder is too harsh. Dip the shell in acid. It’ll probably end up looking like a sieve.

[@emersonjambeiro5004]

Será que realmente será restaurado?? Aguardo ansiosamente os próximos vídeos! Grande abraço a vocês da equipe restauradora! 👏🏼👏🏼👏🏼👏🏼👏🏼

[@GilBatesLovesyou]

I hope these guys the best, but for all the people asking why they're even bothering, here's why. In Vietnam salaries usually are low, about 3-5 million VND outside of Saigon or Hanoi, or about $150-250 USD per month. Cars, however, cost a lot of money, as car importation was restricted in the 1980s and 1990s by the government, and there's a 100% import tax and a 80% registration tax when you buy a new vehicle (or some sort of number that adds up to about 200%.) Vietnam has very little native automotive industry so most cars are imported, so cars like a Honda CRV that cost about $25,000 in USA are almost $80,000 in Vietnam. Older vehicles are still very expensive usually and even a 1990s Civic or Accord is about $4000-5000, when a yearly salary could be as low as $1800. Hourly labor rates are usually low, at about $1 an hour. So if they put even 200-300 hours labor into this car, they can still come out ahead money-wise there, and have a car, which most people don't have.

[@DudeGuy-zt9eg]

Thanks for explaining, I now understand better

[@Axel_Frog1]

Thanks, i can't understand why this trash need to be restored. Now I am understanding

[@GeelyBreak]

Болгарка Ван лав😁 кузовня будет винтом, как пропеллер)бывает же дичь

[@onepiece6083]

Rust to richest of netflix is nothing compared to this guys.. keep up the good work and good luck..part 6 please...

[@moldingpro7208]

This car does seem to be worth the monumental efforts being taken.

[@billcousins3541]

Being a car guy myself, I would have left this one alone. Way to much rust to mess with. By the time they are finished, they could have bought a lot nicer car for what they spent on materials.

[@pradeep7640]

Waiting for complete video

[@albertherr6951]

you guys got a lot of rust to fix keep the videos coming

[@DardyDave]

I suggest you guys should buy a sand blasting kit because you already have an air compressor and they are not too expensive and great at removing rust

[@TSerega81]

Это не реставрация а аннигиляция 😁

[@maverick_tt]

Wow guys, impressed for your work. This car is SO rusted ... Very curious to see how you will save it 👍

[@bagusprihastomo7439]

That is really tough job & very long way to rebuild that chassis

[@pappurao7745]

Was waiting for restoration but none at all. You guys took us for a ride.

[@kintukteekreetukpum]

Nice❤❤

[@HAN-vf7ef]

Ну вы даете ... за такой нервотреп берётес браво👏👏👏

[@yobuscandocaminos9011]

Se agradece mostrar su trabajo. Se aprende mucho mirando lo que normalmente no se ve a simple vista. Felicitaciones.

[@TSerega81]

В конце ролика - просвещается памяти Тойоты Короллы Аминь!

[@ТимурРахмонов-в2л]

Так Корона же :)

[@ManashirKaukaz]

Кто-нибудь, подарите им "болгарку".

[@SerhiyR]

погоди, они автогеном еще сваривать будут😂😂

[@РусланРуденко-э4ъ]

Подаришь болгарку останется половина рисоеда к концу проекта

[@MahiEurope]

Waiting for next episodes bro!!!😊🤗👍

[@zackamanda9799]

Just CRUSH IT !!!!!!!!!!!

[@theannoyedmrfloyd3998]

I often forget how much work goes into stripping a car body frame for restoration. I look forward to seeing the progress!

[@darkfactory8082]

With all the respect, you are optimistic beyond anything.. I'm sure that even the scrap yard won't take it without some head nodding.. Anyway good luck with it, I'm interested to see your art of rebuilding. Who knows, every day we have to learn... =) Cheers.

[@92artstudio]

Hats off to the level of patience these guys are having ⭐️

[@syedminhazuddinrizvi3068]

Hardest restoration.. !!?? That is the impossible restoration of the world if you want to restore it to factory specs.. 😱 Waiting for the next video.. I want next video.. 😭 it's been 1 week..

[@paulbelanger7383]

That roof is free metal to use for fixing the floor pan..👍

[@markshutt1]

Sometimes you have to know when to give up, now is the time! Use a doner shell for the running gear. This should never be allowed on the road again for your safety...

[@НикитаВасильев-ю4у]

С удовольствием посмотрел)

[@iamthecheese2737]

I'm still under the impression that the word "restoration" doesn't translate well from English to the language. I keep watching these and thinking, "there's no way they're going to rebuild this car". Maybe in their language it translates to someone closer to the word "salvage". This is where you get over priced "original factory manufactured parts" from. But I'm gonna keep watching to see where this goes to.

[@SARSteam]

I like your restoration videos but what I ask myself when I do a restoration is what is the cost of the Restoration project versus a good second hand replacement. Well done so far guys and keep strong :)

[@glennokeeffe1470]

Let's see if these guys really can polish a turd. I have my doubts, but i am strapped in and along for the ride...

[@jasonfernandes5294]

Well done on all this work chaps

[@andrewlyons9188]

it is amazing to me how few bolts are braking in this rusty nightmare.

[@HandIeThese]

impact gun makes bolts less likely to strip but im not sure on snaping

[@prashantchiku]

You guys are truly hardworkers.. Very good precisely planned extraction.. Curious to see next part.. Keep it up..

[@royaldefender467]

Super video bro

[@blackoff4395]

Restoration - звучит громко для этого ведра)

[@davidtoth8975]

Puts my wheel well rust into perspective! Good luck with this project!

[@FranciscoSousa-yb6cb]

PART 6 PLEAAAASSEEEEEE

[@星空女神-y9r]

This car look like good! Good for fix!

[@Banana_Milkks]

I wait forever to watch this

[@ВалераПокровский-й2п]

Ну заинтриговали конечно, что дальше из этого хлама будет

[@Skv-yk8lt]

Вывезут в чермет

[@СемёнСемёныч-й2т]

Ничего не будет.Им нужны только наши просмотры,а это все выбросят.И будут посмеивается над нашими советами.

[@pawpatrol2120]

I love car toyota

[@deepsavannah9723]

Will it pass inspection?unless the official in charge is you uncle....😂😂🤗

[@kylewagoner]

The more I watch, the more I ask: why? But I'm along for the ride regardless.

[@anthonyellison8680]

That master cylinder looks pretty new

[@matheusaugustoribeiro3088]

So cool

[@ashc5728]

I dont know if i am watching a trainwreck about to happen or we are about to see some master metal workers, guess we will find out if theres a next episode.

[@Juanjesuspcd]

Ese coche ya es irrecuperable la carrocería ya perdio su estavilidad y eso es muy complicado de volverlo a estavilizar otra carroceria seria diferente

[@maribelzabalanegron3588]

Si verdaderamente lo restauran son dignos de admiracion porque el auto esta que ni para reciclage sirve.

[@johnmartinez8799]

Honestly, There is a big difference between dismantling and restoring, What you guys do is dismantle because you never show the final result.

[@dforaker]

This is troll job. That thing is being chopped up for recycling. No way there will be a restoration here.

[@christianlopez534]

it´s beyond restoration...i think...

[@harrymog4501]

Welcome back 🙏🏼👍🏾

[@rzd3784]

Лайк!!! 🔨🔧👍☺

[@Mohamed.Cr7-1038]

PART 6 PLEASE

[@FranciscoSousa-yb6cb]

your doing a great job! please more vedeos of this car!

[@kl0713]

Part 5 katta waiting❤️

[@_VAISHNAVSVINOD]

Anoo

[@pabloparody6212]

Great job !!

[@MT-bi9qi]

Is the final cost of restoration more than buying a used working car?

[@andsoiltrees3451]

Tuyệt vời

[@Hhhfnsj]

Ребята привет из Омска. Лайк. Какого года тойота?

[@Alhassan7081]

Great job

[@davidquiros5381]

where can you see the finished product, I haven't seen them completely done yet

[@регион09регион09]

Зато не битая))

[@priyangka7449]

Part 6 bro

[@Mxgic-we3cq]

How are you bro

[@munirahmed929]

Very good job

[@tructieptinvui1248]

Great job, good job, see you all

[@dorkuchotanihu9589]

I can't wait for the second video to see how you guys pooled this off. That will be nice to watch. OKAY. THANKS

[@Андрон-у7ю]

Надеюсь они знают, что делают

[@CyberpunkChanel]

сомнительно, после того как они газом отрезали крышу, для меня потеряны все надежды что они что то сделают, специально небось растягивают видео что бы показать как они вварят планку в новую короллу

[@Андрон-у7ю]

@@CyberpunkChanel зато интрига сохраняется))

[@ufo9430]

Качественно утилизируют автомобиль

[@ufo9430]

Чип Фьюз нервно курит в сторонке

[@РусланРуденко-э4ъ]

Конечно,..... НЕТ

[@RandomVideos-ov4lf]

Just put a new body and an engine, it will be good as new.

[@kintukteekreetukpum]

Nice share 😊😊❤️

[@linghuikong6667]

waiting for update

[@teknowil]

who else is watching just to see what parts they use on another car, probably the back glass

[@AmigaA-or2hj]

This reminds me of “Scrapheap Challenge!”

[@alisalemafrar4849]

Saturday night😊

[@fantomasfantomas]

car bought too expensive. just good to recycle and sell the parts still good

[@sonysantoso9177]

Doing great job look like money is not problemo

[@giogio3487]

Se acordará luego de cómo armar todo? Desarmar es fácil, lo difícil es armar todo.

[@lifesoundtrackitaly]

Good job!!! Go ahead!

[@Shishizurui]

America be like : Check out our family mustang belonged to my grandpa, he had it in a garage so me and my brother ordered parts and a crate engine out of a catalog and had it painted at Maco isn't it so cool? These guys be like: I think i found a car challenging enough for us to restore- virtually everything is ruined, oh let me just pull out a catalog to order a new floor for a 30 year old economy car.... oh wait noone cared about it so we'll build our own because THAT is what restoring a car is. if not its junkyard hopping and i bet while these cars are popular they aren't much better than this guy.

[@VeyronBD]

no way this thing is getting restored, they cut the roof off and then bent the whole chassis lifting it...

[@josecarlosrosa6246]

Muito bom essas recuperações.

[@TheJohndeere212]

It is a lots of work to restorethe car

[@FruktsTv]

is this gonna be new hero car in a new Flintstones movie??HMMM :D

[@andrbaglaev4926]

Похоже ребята перепутали слова, не реставрация, а утилизация! Corona

[@jykayksin71]

You guys are making first, and thinking afterwards? Why did you cut the roof off from the top of A-pillars? Now you don't have a whole frame for windshield because you got rid of roof reinforcement at the front edge on roof. And the whole body of the car bent badly and almost cut to half when you started to lift it up after taking the roof off. You should have a sturdy jig for chassis support.

[@romuhamsteri]

ohh c`mon guys you cant be serious about this. But i am impatient to see the final result!!!

[@josemontano7767]

My friend had an old station wagon from the 70s of this car. If he would have kept it it would be worth big $$$

[@johnpolak229]

Gas cutting??!! Hello, further corrosion!)

[@dorkuchotanihu9589]

Do you think you can fix this old beat up car ? Good luck to you my friend. 😁😁😁😱😱