Any reason to change the Horns from Roots to Hella?
@DipayanBose3 ай бұрын
@@SeshadriSSarkar just for change
@HarmeetSingh-bk1lp3 ай бұрын
Hi dipayan, I'm honda cb350rs owner and i have ridden it 5000km. My bike pulls to left when i take off my hands from the handle and it's from starting i guess a manufacturing defect, do you know why a bike pulls to left. And one more thing after riding my bike for some time it starts getting some vibrations when it is cold there in no vibs. I have only done 1st service, will the vibs reduce after second.
@DipayanBose3 ай бұрын
@@HarmeetSingh-bk1lp probably forks are not aligned properly. Could be cone set improperly installed. Inspection required.
@AlienFoka6 ай бұрын
Did you get the chassis repainted?
@DipayanBose5 ай бұрын
@@AlienFoka little bit touch ups
@shrikantthakre35464 ай бұрын
Can u pls share which handlebar position is good , RS with riser, hness stock, AOM Handlebar. I dont want to compromise on riding quality. I have rs
@alwinjoy92406 ай бұрын
Hi Dipayan, where can i find the chain slider used in honda highness and how frequently should it be replaced.
@DipayanBose6 ай бұрын
@@alwinjoy9240 at Honda bigwing service. When replacing chain sprocket, it should be replaced as well.
@alwinjoy92406 ай бұрын
@@DipayanBose thank you for your prompt response.
@ankankundu13265 ай бұрын
Dipayan bose..bro please tell me a detail about this engine...does it has over head cam like the RE J series or dies it still use push rods ?
@DipayanBose5 ай бұрын
@@ankankundu1326 SOHC
@MrAnwarmashud6 ай бұрын
What mirrors are those please?
@DipayanBose6 ай бұрын
@@MrAnwarmashud honda CB 300 R. Around 500 for a pair.
@omega69-un8yq6 ай бұрын
hey, Any update on the RPM meter?
@creslynsaviofernandes96576 ай бұрын
I assume, it's sadly a shelved project..
@omega69-un8yq6 ай бұрын
@@creslynsaviofernandes9657 Guess we'll have to import the rpm worth 12k for this hness :(
@DipayanBose2 ай бұрын
No mate, a failed project from my end, primarily because of lack of time and honestly exceeding the budget I thought. It would not be worth.
@oviar0076 ай бұрын
Hi DipayanBose, witch front Brake Caliper you changed, any difference?
@DipayanBose6 ай бұрын
@@oviar007 calliper is stock.
@Thecuriousmind1235 ай бұрын
How come restoring a bike under 3 years old..
@DipayanBose2 ай бұрын
Restoration does not only apply to engine or very old bikes. In my case it went through lot of experiments and lately it too much neglected, hence few parts needed attention. And playing around with all these is kind of hobby for me. If used with care and maintained time to time, it's a gem of a bike. Should go a long long way. Happy riding.
@AlienFoka6 ай бұрын
The videos I was waiting for
@agustusa76736 ай бұрын
My silencer pipe is started rusting like yours, Any solution to prevent it?
@DipayanBose6 ай бұрын
@@agustusa7673 just keep it as dry as possible. Chrome exhaust has this permanent issue.
@themotoguide71914 ай бұрын
Hey Deepayan!! I miss power in CB350, was thinking of adding an oil cooler and high flow air filter for some performance gain. Any suggestion on this?
@DipayanBose3 ай бұрын
Oil cooler not required, since it's a low revving engine. You could definitely add high flow air filter. Performance will slightly increase and will stay persistent for a long time, unlike stock air filter where it drops very fast. Use Normal petrol. Don't use power fuels. It makes the engine create more heat. Thanks
@themotoguide71913 ай бұрын
@@DipayanBose thanks for the response.
@Xeroffice6 ай бұрын
bose speakers ad se yaad aya then checked if new video arrived and it arrived 😅
@nstugaon6 ай бұрын
Only thing that is constant in this world is change