Restoration Hammer Drill ⒽⒾⓁⓉⒾ TE 7-C Electric 5K$ Germany Old | Restore Hammer Drill HILTI

Restoration Hammer Drill HILTI TE 7-C Electric Germany Old | Restore and Repair
We found an old drill in the warehouse. It has been damaged and no longer functional. German hilti drills are very expensive. We carried out restoration of the drill, the casing of the drill was severely damaged. The inside of the machine has been damaged and is no longer operable. We proceed to wash and repaint the details. Some parts were seriously damaged, we conducted a new replacement. The hilti hammer is very detailed. After so many efforts we have completed the electric hilti hammer. It has worked very well and is almost new. Thank you everyone for watching my video. Subscribe to the channel to see the latest videos. Thank you.
channels: / @restorationscrap8829

[@02mp9696]

Don't use gloss paint on the plastics, It looks cheap, especially after a great rebuild. Try a heat gun or something. Or just clean them up and leave them original. Will look better. Just my thoughts. Constructive criticism 👌

[@asadtalib1531]

Heat gun is not a great idea..used once..deformes the part

[@02mp9696]

@@asadtalib1531 it can be done, just a lot of patience. More so on thicker plastics, but even on thinner. But if someone hasn't done it before then it can warp/ melt pretty quick lol.

[@hoquangngoc1990]

Original would be better

[@luisangelcampos1681]

Excelente resultado,es asombroso ver el resultado final, muchas gracias por compartirlo saludos desde Costa Rica 🇨🇷💯

[@ernototh9606]

Ez szimpatikus fiatalember nagyon ügyes.Minden roncsból, agyon rozsdásodott eszközből szinte újat varázsol.Magabiztos kézzel bontja a szerszámokat, körültekintően szelektálja, tisztítja, rendszerezi.Különösen szimpatikus az összeszerelés: mindennek megtalálja a pontos helyét és határozottan építi a szerszámot.Mellesleg mindig tiszta és rendet tart a szerelő asztalon.Gratulálok!

[@mustaphaettiani2218]

Très bon travail bravo

[@HTGameplayTV]

I love the way you revive old things

[@davebuts1921]

Why do they paint their stuff with mud, a quick tip mate, painting it with mud will not make it run better, it will not cool it faster, and if you do need to repair it, you will not need to remove the mud first. Just trying to help you in future.

[@ismailyuruk9638]

the paint has gone bad

[@fredrichardson9761]

Great rebuild of a fine piece of equipment! Man that is one complicated little machine... great job getting in apart and back together again! And I agree you don't need to worry too much about paint with something like that - just the original plastic is fine and legit :)

[@tiptop1102]

Good job again. You're strong man ..

[@aylabaydemir7854]

Ne adam.ya elinden gelmeyen yok

[@acs.barnabas]

I look your video, this machine dont will, run well, because in the gear hause hilti dont use grease, 35ml hilti oil only use because the flying piston run well for this oil.

[@SanfilippoAngelo]

Too strong video !! Like

[@edmarkham2632]

How do you remember how that thing goes back together ? I am surprised at all the parts in that thing. Never the less, good job.

[@uchuu2145]

Đỉnh quá !

[@paulorobertoleitemouraolei2711]

Se eu morase nesse país ñ compraria ferramentas só pegava no lixo e arrumava aqui no Brasil não se acha ferramentas assim fácil no lixo

[@Lesnz2009]

Let's go again cool...I like the red colour...good job cool

[@uluonder8415]

You are very talented and successful shooting ⚙️👍

[@valmirramos555]

Gratidão restoration scrap!🖒❤🇧🇷

[@restorationscrap8829]

thank you

[@sajeeba6023]

Good

[@acs.barnabas]

Hilti is not german. Hilti's are made in Liechtenstein. Liechtenstein is princedom, litle monarch near austria and swiss. Only 160 km2

[@norybortsac1005]

Saludos me ayudaste gracias que DIOS TE BENDIGA Y TE GUARDE SALUDOS DESDE GUATEMALA

[@israel_fernandes]

Um ótimo trabalho. Sou fã . Macaíba RN Brasil

[@bojidarvasilev8854]

after painting this machine look like so cheap and some kind " Chinese " 😊

[@fernandorobles7211]

question.. 5k what? dong, euro or dollar? coz that unit here in USA is $500 dollars new. good video as usual. keep up the tools restorations!

[@isaacgonzalez3684]

The black parts must be painted with matte black, the red must be painted with a clear to leave it with the original color and the original hilti brand, with that red paint it looks like a cheap Chinese drill, but apart from that good restoration.

[@HepauDK]

My thoughts excactly. All that shiny paint makes it look like a cheap copy. And Hilti machines definitely aren't cheap...

[@luischerrezcherrez4132]

Hermosa herramienta alemana. Que gusto y capacidad.Volver a la vida las herramientas.

[@jmaurovassouras-rj6139]

Fera demais! Que mente! Parabéns!

[@josebueno8539]

Scary horn at 1:33 😂, videos are better with natural sounds, I hope you keep them 👍

[@gibmelson7628]

ahhhh hilti ! the rolls royce under this machines ..... and expensive .

[@robertobezerra8376]

Maravilhoso trabalho parabéns.

[@geraldolmstead1335]

This tool still has a lot of life in it thats because its is a high end tool.In the States this tool is usually only repaired by techs and the support for a DIYer is not there, plus the parts are very expensive but you did a very good job you have tech savvy.

[@stevecarr7338]

I'm glad you fixed the T at @31:16 My OCD would have kept me up all night.

[@hoquangngoc1990]

😄

[@user-nb9ef9fh9y]

good job👍🏻

[@s.e.474]

Sehr talentiert. Respekt 👍

[@santiagofranciscoescobar3610]

perfect job, but i donot painting only clear the plastic

[@ColonelHogan9162]

Mit Taschen-Multitool. Sehr professionell.

[@Bjondo86]

before the paint job, look its a really dirty hilti, still one of the best drills out there. after paintjob... oh its just a cheap chinese knockoff

[@user-sb5hz5we7z]

Спасибо, очень пригодилось!

[@user-mk3ie4xn5i]

Модель 2018 года. Это же как надо засрать так перфоратор за 2 года. Просто создаётся ощущение что он их в зеилю на пару месяцев закапывает где нибудь где посырее а потом с понтом нашёл "Старую немецкую дрель" да еще и за 5 килобаксов :) но в целом парень молодец старается :)

[@meriherrera3626]

Quality is good for the worf

[@fixat-illshowyouhowtofixyourpo]

Can’t believe you painted the logo 😧

[@thomasb.dr.baptist7517]

It is NOT a German brand !

[@MrIRMOS]

In time the grease will destroy the gearbox and hammer action, rince it out and refill with the correct grade oil...

[@joaojchagasdasilva]

Tirei o chapéu

[@TheMik088]

Probably one of your most intricate jobs . Know wonder those Hilti's are damn expensive to buy. Way too many parts. Great job on the reassembly.

[@laurenjudd4932]

My Dad still has his Hilti TE72 from 1980.

[@virginioaugusto1780]

Uma bela e complicada máquina Alemã!!🇧🇷🇧🇷

[@abderrahimhaddanitankioupr9367]

TANKIOU PROFESEURE

[@VinDcator]

Beautiful piece of work!

[@MarekBlesko]

Podziwiam takich ludzi Rozkręcić każdy umie ale złożyć to już nie 😅

[@domixkatowice6047]

Nie wydaje Ci sie że do tego młotka leje się olej ? a nie smar?

[@bartoszrogowski7283]

Olej a nie smar

[@christophereng815]

Nice wok, your oddly mesmerizing.

[@anticfr432]

Dear friend. I can advise you how to restore the plastic instument to factory quality. 1. Sandblasting plastic parts. 2. Spray with acetone.Acetone will fuse microscopic cavities and evaporate.The surface will be as from the factory-shagreen.

[@tariqsalah9492]

Good job

[@georgeleojosh5257]

Good job....

[@user-fy6fw5ys5m]

Классный перфоратор

[@cornelioescipion9930]

The price (brand new, included taxes) is 750 US dollars in Peru. Thanks for "the show".

[@Jarisson--Jari]

Vixi esse povo adora jogar ferramenta ainda Boa no lixo

[@restorationscrap8829]

thank you bro

[@valmirramos555]

Deve ser por conta de e prozirem muito e o preço lá deve ser muito mais em conta 🖒

[@Jarisson--Jari]

@@valmirramos555 pode ser mesmo

[@J-J-S-S]

Nice job

[@robertobezerra8376]

Excelente trabalho tmj.

[@aamirshahzad8012]

Nice👌👌👌👌👍👍👍👍

[@sebastienhaimric]

very good job The Boss!

[@mahdimaximieus434]

Big men. Algeria

[@user-he8uz1mn8e]

👍👍👍👍👍👍

[@abdo-hr9jr]

Nice job, 👌👍

[@krzysztofk3381]

Kpina, nawet narzędzi nie ma tylko scyzoryk.

[@wilsonaliriolaraacosta6314]

Good Morning Master, can you help me about of product what you use in the process of pickling of fastener? What type of product is and you can gift me the name of family chemical is? Thank you very much for you help and so much congratulations for excelence labor and channel

[@esenkitapkrtasiye7608]

It was a very difficult task.like a puzzle.

[@mickaelr6027]

super !!

[@rolandocorrea1204]

Esa pintura quedo muy chapucera ,ahora parece una imitación de la original hilti

[@josebueno8539]

Ahora parece un "Jilti" 😂, pero el chaval ha hecho un gran trabajo.

[@masghar6192]

Hilti 50th

[@maycamtayduythanh4396]

Cái máy đang đẹp lại đi chát bùn đất vào .. khổ 😅

[@jimlondon1]

I have a TE25, aTE17 and another I don't know what model it is. They are my dads and are no longer working so I'm going to restore them some day. HILTI drills are very good.

[@bihalogen]

Where's the oil, dude?

[@hasantengul8500]

what do you clean oily parts

[@johnsonma814]

Hi

[@tuonghoavlog2282]

Việt nam.làm youtube ở nước ngoài hay gê ta

[@ansgarc.2302]

for sale and value it is better to let the Finish scratchy and original. the Job you did is also very good. :-) and the machine new is not about 5k... it is about 500 bugs

[@gilbertsabio4834]

here in the Philippines, how and where can i buy the connecting rod and piston if it is for model TE-7C? tnx!

[@tylercapeh]

congratulations you managed to make a $1000.00 hilti drill look like a $20.00 Chinese knockoff. it would have been better if you sanded the dyed plastic smooth and left it without the cheep stickers

[@incognito3501]

Callate estupido

[@nationmsa5249]

sos un capo genioooooo.....!!!!!!!

[@user-fy6fw5ys5m]

Где он это все берет ощущение как будто это комисионка он берет востанавливает.и продает потомучто запчасти иногда ставит не хилые видео про макиту .они то не дешевые у нас а он шарах барах и готово.

[@tomszyb9096]

Music sound like the tune from Kickboxer

[@jawada.1566]

👍👏 Excellent job, keep going. Where you live? I have 2 drills need to be repaired. You might help me to repair them.

[@shamilbasayev952]

👌

[@derek763]

Did not put oil in the gearbox ,

[@restorationscrap8829]

yes. thank you

[@manyan017]

You do a great job but you need to stop painting the plastic. Makes it look cheap.

[@thenomenclature7243]

Never paint a Hilti regardless of how bad the body looks, other than that what an excellent job!

[@camtruong5911]

6

[@faisaliqbal6744]

You are a great handyman, this tool needed someone with your skill to repair it back to life, just don't restore them.

[@533mohan]

It seems that mud on top of the machine wantedly put on?

[@inloveoftools2330]

Good job and repair, but why do you paint plastic parts? Now it looks like cheap copy of Hilti tool. I think you need to leave plastic peaces as it is to leave genuine Hilti look...

[@nguyenvanquoi7972]

I think too.

[@ThuLe-zo6dt]

Bữa sau thì nhét ít bùn thôi lộ liễu quá

[@domixkatowice6047]

Wydaje mi się że do tego młotka leje się olej ? a nie smar?

[@milkshake6984]

Where can I find the soundtrack used in your video?

[@servistools6254]

👍

[@user-nb7ev2tc5f]

Мастер по ходу не электрик. Не движок не прозвонил, тупо почистил и покрасил. Электрооборудование нужно сначала проверять, а потом реставрировать. Вся реставрация- чистая косметика.

[@user-yb5il8ds1u]

Лучше бы не красил, родню почистил бы и оставил как есть

[@sedat1995]

No Grees 20W 50

[@meriherrera3626]

Of the maquin

[@qlimaxbass5022]

Just one question why this guy all his restoratios covers with mud? When job is done all tools they bury in the ground? xD please explain xD

[@onlyme7939]

People who get tools into such a terrible condition need to be wire brushed between the legs😡