Restoration Hitachi C7FS sliding saw machine | Restore and reuse old hitachi C7FS multi-angle saws

[@leaiduong4371]

Very good

[@louisarmstrong8863]

Absolutely easy IF you know what you are doing ! it's so simple .

[@zilvalcampos6170]

Bought this for my friend for his birthday, and he loves it. Father-in-law was a little jealous, even. :) Built solid, but light enough to move around for projects. Easy to use kzbin.infoUgkxPeGkHOMe05FySypTOvYumxMn-xi39oRe and makes great precision cuts. Doesn't come with a laser mount, but the fence is straight as an arrow and if you measure carefully, it's not a problem. Can handle dimensional lumber with ease, but of course, there's a limit to how thick. Handled a 4x4" post without a problem, but 4x6" we had to flip and cut twice. Only thing we've noticed is make sure to tighten the nut that holds the saw blade when you take it out of the box and maybe check up on it occasionally. For some, this is probably a no-brainer, but we neglected to do this and a few months in, found the motor running but the blade spinning at about half speed or less. Tightened the nut, and problem was solved. Very happy with this purchase. Dewalt makes sturdy stuff.

[@leonardopenna6214]

Per come lavorano e per quanto inquinano questa gente merita ESATTAMENTE ciò che ha !!

[@paulfellows2094]

very well done guys she is a beauty great job

[@paulleavitt9550]

Great job! I love Hitachi chop/sliding miter saws

[@tombonny2162]

Respect

[@RickNelsonMn]

That's my favorite saw.

[@t3930]

Really would look better with slides polished.

[@paulorth2251]

Don't know if it worked before you got it but it sure does work nicely now. Nicely done, sir. Nicely done.

[@fallsroad]

22:16 zip tied sock is awesome!

[@humboldtpicker]

Judging by the S'on Phun spray can this guy is in Vietnam. I wouldn't recommend spray painting plastics. It makes them sticky and gross and you will regret it. Use a heat gun to restore faded plastic by slightly remelting it but only long enough for the color to change and not too close. You can also use Rit dye to dye plastics as well. My 2 cents. I'm restoring a chop saw now but will try bar keepers friend on the cast aluminum and polish instead of paint.

[@mohamedalli4832]

Good job buddy

[@yeagerxp]

Nicely done 👍👍👍Thanks for sharing

[@ezequielsilva2709]

Ficou perfeito, parabéns!🇧🇷👏

[@uwer.6887]

Looks good, but the Spring is to press the steel Ball, so the Steel Ball has to be at place With the Spring ..

[@ainungendutz5697]

di tunggu video berkarat selanjutnya

[@glennroach3337]

Looks good will come in hacdy when typhoon season starts and needs to rebuild / replace wood on homes there

[@restoration-restore-repair]

ok

[@nataliadelveaux2177]

@@restoration-restore-repair aáqa2

[@Lesnz2009]

Some corrosion there...great result

[@HuongNguyen-cj8ul]

I like video

[@wiliamto6075]

mantap 👍

[@restoration-restore-repair]

thank you

[@michaelparsons7334]

Beautiful What did you soak the aluminium parts in. In the black container The came out so shiny. 👍

[@josoadavidson9250]

I'm not so sure but i guess it's an acetone solvent

[@stormkhan4250]

If you look closer the aluminium is no longer quite smooth but has scratches all over. It looks to have been wire wheeled off camera.

[@HugoSantiagoM]

Oye una pregunta como canijo meto el resorte esq estoy 😢atorado con eso en tu video mo se nota bien como lo hiciste alguien me puede explicar de favor

[@РавильЯсинский-ф6ч]

Это не реставрация, мелко срочное обслуживание инструмента, все закрасили, где надо и не надо

[@williamclayton6794]

i would have thought he would have cleaned the slides better

[@metalman065]

Looks like another tool from the plant where they make all the difference types of furniture out of pallets. Everyone runs it and misused it. Where the more you build throughout your day the more you make on your check.

[@bialbrasil6468]

L

[@x84pav84x]

И винты тоже нуждаются в полировке.

[@x84pav84x]

Подшипники не поменял, смазки мало положил. Халтура, дизлайк только.

[@artnickel1664]

You need to get gloves for paint removal, makes it easier

[@kohovsky]

Направляющие походу не работают.

[@sot11cat]

He just repainted it ...

[@robertfontaine3650]

spray painted plastic, rattle can on the base. Rusted rails. Not great decisions for a tool that you are going to use

[@x84pav84x]

16:18 направляющие можно было отполировать.

[@didierelfassi2554]

👍👍👍👍👍👍👏👏👏👏👏👏👋👋👋👋👋👋👋👋👋👋👋👋

[@angvantrinh5137]

anh làm xong bán lại cho em được không với giá bao nhiêu tiền vậy anh

[@christiannoetzold2956]

Typisch fern Ost was ist hier restauriert man sollte doch wenigstens die Verschleißteile(Kugellager und Kohlen erneuern)für mich ist das nur gereinigt und neu bemalt

[@YamahaYZFR6RJ05]

danke, das wäre in etwa mein kommentar gewesen. besonders gut gefällt mir die farbe auf der werkstückauflage 🤣

[@solportplay1154]

limpia las barras telescópicas, muy mal trabajo pésima calidad

[@lingpiao1]

Buon giorno io ho fatto manutenzione sugli elettroutensili per alcuni anni, restaurando molti elettroutensili, ma se avessi lavorato in quel modo mi avrebbero licenziato il giorno dopo, hai messo la molla da una parte e la bilia di acciaio del piano dall'altra, poi questa mania di verniciare tutto indiscriminatamente anche le parti che non vanno assolutamente verniciate, le canne di scorrimento in acciaio non sono state lucidate a dovere , durante lo smontaggio battere con un martello su alcuni pezzi in similalluminio, è altamente pericoloso si rischia di romperlo, il taglio a 45° si vede ad occhio che non è perfetto. Questi video sono altamente DISEDUCATIVI per i neofiti che magari cercano informazioni e spunti su come restaurare un elettroutensile,insegnano solo a "SBAGLIARE" e per quelli che nei commenti ti scrivono ""bravo bel lavoro continua così non ti preoccupare dei professori che scrivono" bene queste persone non capiscono nulla di elettro utensili e forse è meglio che si tacciano. Un lavoro di PESSIMA QUALITA questo non è un restauro Good morning I have done maintenance on power tools for a few years, restoring many power tools, but if I had worked in that way they would have fired me the next day, you put the spring on one side and the steel ball of the hob on the other, then this mania to paint everything indiscriminately even the parts that must not be absolutely painted, the steel sliding rods have not been properly polished, during disassembly beat with a hammer on some pieces in imitation aluminum, it is highly dangerous you risk breaking it, cutting at 45 ° you can see that it is not perfect. These videos are highly EDUCATIONAL for beginners who may be looking for information and ideas on how to restore a power tool, they only teach 'WRONG' and for those who write to you in the comments '' good good work continue so don't worry about the teachers who write 'well these people don't understand anything about electric tools and maybe it's better that they keep silent. A job of VERY LOW QUALITY this is not a restoration

[@paolocoli1531]

Pessimo restauro....i perni non sono stati smontati e non spazzolati e lucidati a dovere

[@ВладимирПопов-о5и]

РУКАЖОП....

[@abderrahimhaddanitankioupr9367]

TAHANKIOU. IRMANO