My single parent Mom bought me a 1958 MGA when I was 14 for $800. For reference, that was 44 years ago. By the standards of today it was in better than decent shape. I tore into the disassembly of it, with restoration as the grand plan, with ferocity. I still have a visceral reaction to the smell of Liquid Wrench. Working alone, I deconstructed that fine automobile down to what was literally a rolling chassis. No poetic finish to this story. As I had no money to further the project, it sat in the garage, and eventually out in the yard, for a couple of years. I ultimately sold it to a European (I'm American) car salvage yard for...$800. But there is a lesson or moral to this story. Those were some of the best days of my life. The knowledge I gained, both mechanically and physically, serve me well to this day. My fascination with pistons and carburetors and gauges and body panels and...all of it, resulted in a pretty decent understanding of the workings of the automobile. And to some extent, myself. Sorry if too serious. I think I just miss that damn car.
@staceymccloud68 ай бұрын
You rock sir.
@hotchkissart Жыл бұрын
Great Video! My MK II was sitting Outside an empty garage for 12 years and had an 8 foot sapling growing through the passinger side floor.
@kencarse367710 күн бұрын
Congratulations and well done
@PatGill-tu6oq5 ай бұрын
I did a very similar O/D conversion to my 1600 mk1, 50 years ago, restoring it for the second time at the moment!
@winsensijbrandij5 ай бұрын
Nice that you keep the car on the road, good luck with the restoration
@markchodroff250 Жыл бұрын
Just wanted to say in 1966 I had a 1961 MGA mark 1 , loved that car sorry to this day I sold it . It was my first car and the car I dated my wife in ! Memories
@markchodroff250 Жыл бұрын
What a beautiful car , the time and Patience it took to do that job is amazing, enjoy that beautiful car you deserve it
@windmill19653 жыл бұрын
Erg mooi, om deze restauratie zo in foto's gevangen te zien. Het moet een enorme klus geweest zijn.
@winsensijbrandij3 жыл бұрын
Bedankt voor je reactie, het is heel waardevol om dat samen met je zoon te doen.
@StewartHarding2 жыл бұрын
What a fantastic job you guys did on my dream car. Well done!
@marknelson59295 жыл бұрын
Always great to save one of Abingdon's finest. Well done.
@tonyb19686 жыл бұрын
Thanks for putting this video together. What a great restoration you've done.
@deep6thisdeep6this922 жыл бұрын
buddy back in high school (1968) had a rare '62 twin cam chassis with the common 1600 mkII engine. was eventually stolen back in the 70's.... no surprise. his had the recessed grill.
@elskarko10 ай бұрын
A labour of love! Well done👍
@phillarnach94842 жыл бұрын
Amazing job, great video too. 5 years in 15 minutes.
@richardjensen27693 жыл бұрын
By about 9:40 I needed heart massage and oxygen (not COVID related -- it was the sight of that set of spoked wheels that almost did me in). Wouldn't have taken very long to use the Abingdon provided copper hammer to knock the hubcaps off of the old rat I used to own, and slip those (carefully!) into Position.
@derekporter76515 жыл бұрын
Amazing! I had an MGA 1600 Roadster that was in better condition than that. The chap I sold it to scrapped it as he did not think it was worth restoring, but then I am talking about 1976.
@winsensijbrandij5 жыл бұрын
If you knew then what you know now !!
@stevemayner96624 жыл бұрын
Beautiful!!
@fameci Жыл бұрын
Bravo!!!!! Great job!!!!
@MycroftMobil7 жыл бұрын
Very nice. I had a 1600 MkII back in 1970. Still have the hard cover factory shop manual. Will you be searching for the proper Mk II grill?
@darioivaldi1133 Жыл бұрын
MAGNIFICA! !!!!
@kicksey7 жыл бұрын
Great restoration well done guys - that car was beyond a mess. Incredible job
@winsensijbrandij7 жыл бұрын
Thanks!
@jenniferbernabealfaro56832 жыл бұрын
GRANDIOSOS BENDICIONES
@gillesvandemoortele22743 жыл бұрын
Prachtige restoratie!! Van waar komt het interieur? Ik ben nog opzoek naar een nieuw interieur voor mijn mga, en vond deze een zeer mooie kleur ;)
@winsensijbrandij3 жыл бұрын
Gilles, bedankt voor je reactie. Het interieur komt van MIrror Trim, PJM Motors heeft ook mooie kleuren en goede kwaliteit.
@gillesvandemoortele22743 жыл бұрын
Oke, bedankt voor het advies!
@janegadd16817 жыл бұрын
Superb watched it twice
@winsensijbrandij7 жыл бұрын
Jane Gadd Thanks!!
@christheobald82817 жыл бұрын
Great video for a great journey. Well done. Never Sell.
@winsensijbrandij7 жыл бұрын
Thanks!
@Chicago6113 жыл бұрын
I have a MGA, not sure what year, it's not a twin cam engine. Has the motor, trans, and original wire wheels, no windshield. Body is solid, still has the wood floors and half of the drivers seat. Please contact me if interested.
@johnclarke25534 жыл бұрын
Shame it's got the wrong grille. That's a 1500/1600MK1 grille.
@kevinprice42133 жыл бұрын
Really nicely done and a great video. Could you please put the rear light cluster the right way round
@winsensijbrandij3 жыл бұрын
Thanks for your reaction but I don't understand what you mean by the rear lights
@kevinprice42133 жыл бұрын
@@winsensijbrandij Apologies, I was mistaking your model for a previous one, where the read lights are vertically aligned.👍
@winsensijbrandij3 жыл бұрын
@@kevinprice4213 👍
@williamwallace71662 жыл бұрын
The Mark II 1600 MGA and the rare MGA twin overhead cam both had horizontal tail lights. The twin cam came with splined steel disc knock off wheels instead of wire wheels.
@thomasstorey35446 жыл бұрын
can u tell me where u got the cup washers for the floor boards?
@winsensijbrandij6 жыл бұрын
Thomas Storey Hello Thomas, I bought the washers with screws by Moss UK part number GBK2107X
@thomasstorey35446 жыл бұрын
thanks Harry...BTW a fine job...indeed
@allanarmstrong43335 жыл бұрын
Woolworths
@andrewphillips48974 жыл бұрын
Do you mean early 1960's?
@amirabbasgt4 жыл бұрын
I really enjoy of this video, and I should say that I know a person who has this car but it need to color again and I don't have enogh money to buy that, so I looking for a person who interest to buy this car and work on it together. I'm in Cyprus now. If someone like help me to do this project please send me message. Thank you🙏🏼🌹🌺
@bygeorgenz4 жыл бұрын
i would never cut the chassis like that , better to use a diffrent G Box
@PatGill-tu6oq5 ай бұрын
Did mine 50 years ago, still going strong, including two trips from London UK to Athens Greece.................
@ProductionsUnhinged6 жыл бұрын
Well done guys
@tmoe73823 жыл бұрын
I noticed that at this point in time, 11 watchers have no idea what they are talking about......great job
@winsensijbrandij3 жыл бұрын
Thanks 👍
@robertstockamp69924 жыл бұрын
The music makes it unwatchable.
@tvcchuck4 жыл бұрын
great video.... lose the stupid music...
@winsensijbrandij4 жыл бұрын
Yes I know ...... I had the Eagles as the music but that failed by the copyright!!