Restoration of an old and damaged brass hammer. How i restore ?

I found this brass hammer in the scrapyard and decided to renew it and modify it, especially since this hammer will be useful to me soon. Have a nice time watching how i restore this old damaged hammer.
If you have any questions or ideas concerning new projects, send me a mail you can find below.
Thank you for your support, leave a like, comment and subscribe if you want to see more videos like this from our channel Custom Restorations.
🔴 SUBSCRIBE and hit the 🔔 if you don't want to miss the next restoration
/ @customrestoration5317
🔴 Contact us: [e-mail]
🔴 Last video :) • Rusty wrench restoration
🔴 Timestamps:
00:00 Preview
01:00 Washing
01:50 Sandblasting
02:30 Handle making on a lathe
03:43 Shortening the handle
04:04 Cutting off excess wood with a chisel and final processing of the handle
04:38 I make a hammer shape on a lathe
05:40 Polishing hammer
06:14 I make a new wedge
07:14 Making a space for wedge
07:20 Second wax
07:40 Hammering the brass part on the handle
08:16 Final results
This video is not sponsored.
Thank you very much !
#Customrestoration​ #Restoration​ #Hammer

[@customrestoration5317]

Thank you for watching ,dont forget to like and comment this video you can also subscribe my channel for more restoration 😃

[@DeanG55]

All right!! Good video. You saved another old tool from the smelter!!

[@customrestoration5317]

You are very kind thank you for your support and have a great day 😊

[@diyresttube]

i like the outcome of your work.

[@customrestoration5317]

Thank you very much buddy 🙂👍

[@milanradak269]

You have a lucky find with that. Beautiful work.

[@customrestoration5317]

Thank you very much Buddy 😊 Thank you for your support 😊

[@relax7616]

Nice job !!!

[@customrestoration5317]

Thank you very much it's really nice to hear it 😊👍

[@7duser10]

Why would you get rid of the nice patina and the original makers mark? Nice polishing job, but won't stay like that for long if you use it.

[@customrestoration5317]

I need this hammer for some wood parts so im pretty sure that this hammer stay like that, this hammer was in terrible condition was very battered so i decide to use lathe and unfortunately makers mark did not survive. Thank you for commet it's really important to me. Have nice day 🤗

[@robvermeulen4043]

Beautiful result. As for my personal opinion ( that doesn't count as we al know🙃), I think the Handel is a bit large for the hamer (of course it depends on the amount of force you need) and I'm missing the factory stamp/lettering after restoration.

[@customrestoration5317]

For me every opinion is important. Thank you for comment and i will improve as time goes 😊

[@restaurandocoisasvelhas]

It is perfect.

[@customrestoration5317]

Thank you 😉

[@restorationconstantines7731]

Very well👍

[@customrestoration5317]

Thank you 😊

[@07fjcruiser1]

I love brass. And you did a good job, not going to take that away from you. I have an old brass Plomb. But I don't think I can take the lettering. You can get a piece of brass anywhere and make it look like you did. I would have liked better if you had taken out the mushrooming and perhaps even filed it some, but keep the lettering to show the old age, where it came from. basically some history of that hammer. Smaller handle would have looked better also. Thats just my take. You learn as you go buddy.

[@customrestoration5317]

Thank you buddy for you opinion it's really important to me and i will make better next time 😊👍 Im still learning everything so yes next time will be much better

[@BrothersRestorationIndustry]

Good joob 🌹👍

[@customrestoration5317]

I appreciate it thank you very much ! 😊👍

[@anthonycaster9319]

I will say interesting use of the lathe for this tool modification. Overall good end result.

[@customrestoration5317]

😊 thank you very much

[@hoperestoration5595]

amazing

[@customrestoration5317]

Thank you 🤗

[@stevenjennings8347]

Awesome informational educational video experience Y'alls God Bless Ya 🙏

[@customrestoration5317]

Thank you very much buddy God bless U 2 🤗

[@steve.b.23]

The wedge looks like a plectrum. You could use it to play some heavy metal. : )

[@customrestoration5317]

Hahah 😄 metallica for example 😊

[@GT_Racer347]

Sweet 👍🏻 👍🏻

[@customrestoration5317]

Im glad that you like that, tank you 😊

[@gstag100]

Nice job!

[@customrestoration5317]

Thank you buddy 😊👍

[@cosmealvesalves6523]

Bom Dia Amigo ! O Cabo Ficou Desproporcional Com O Martelo, Gostaria de Sugerir Que Colocase Um Cabo Mais Fino ! Saudações Brasileiras ! Cosme - São Paulo - Brasil

[@customrestoration5317]

You are right it is not proportional but surprisingly this hammer is very comfortable to use 👌 Best regards 😊

[@pauldockins9635]

Sad how many throw away useable things, thus the world is, thank you for the tool save

[@customrestoration5317]

🤗 thank you Paul. That is really nice that you write so 😊👍

[@sexavetabdulmanafov3127]

👍👍

[@DANYMITERESTORATION]

I love brass tools they come our so beautifully when restored. I am curious what would a brass hammer be used for? Or is it only aesthetic? Great Job!

[@customrestoration5317]

Thank you very much buddy, it will be used to disassembly and reassembly small or delicate items 😊👍 Thank you for your support 🙂👌

[@DANYMITERESTORATION]

@@customrestoration5317 got it - I subscribed to your channel so looking forward seeing you use it:)

[@Tektoes1]

I use one to loosen/move parts when they must not be damaged or dented. I have a bigger copper hammer that was made to specifically remove the spinner wheel hub on MG cars. The cars used to come with them, so these "Thor" hammers are somewhat common.

[@DreadnoughtLeather]

Nice work!

[@customrestoration5317]

Thank you buddy 😊👍

[@randomdutchguy]

I dont know why....but in going to restore a hammer after seeing this

[@customrestoration5317]

Thank you 😄 I wish you good luck 😊👍

[@randomdutchguy]

@@customrestoration5317 well i did ( 2 ..and An ace) kzbin.infot5IztvBvNGU?feature=share

[@RobertSiwik1968]

Great job what is the diameter of the head? You should restore the screwdriver!

[@customrestoration5317]

Thank you very much 😊👍 diameter 3 cm (1/10 foot). When I have some time, I will do this screwdriver because I am working on several projects, plus a garage renovation, a lot of work but I'm doing it all for you, so there will probably be such a project as well 😁👌

[@morebetterrestorations7987]

I like it...I'm subscribed!

[@customrestoration5317]

Thank you 😊👍

[@elmerjwolsfeld9851]

Beautiful! Now, can you fix that old screwdriver it was attached to?? 🤣🤣

[@customrestoration5317]

Thank you 😁👍 yea sure 😂👌

[@pghgeo816]

Your Hammer, your rules But in my opinion your Botched that hammer when it went on the lathe. in stead of "restoration of an old and damaged brass hammer. How i restore" it should have read i used a brass hammer head as a starting point for making a new brass hammer.

[@customrestoration5317]

You have the point 😊 you got me 🙃

[@pghgeo816]

Like i said your hammer your rules @@customrestoration5317

[@customrestoration5317]

@@pghgeo816 It's Custom Restoration channel and in my opinion title is good cause this hammer look really bad and there was no chance to renew it any other way at this point, i keep improving my skills and channel buddy 😊👍

[@DavidJones-we7gr]

Sad that you got rid of the makers mark this is destruction not restoration :(

[@customrestoration5317]

It's Custom Restoration buddy 😊👌 but I am very grateful that you comment 🙂👍

[@xgoolyverx]

There is nothing left of the original, you have not saved anything! With the same success, it was possible to make a new piece of brass !!! What kind of restoration is this ?!

[@customrestoration5317]

At that time I didn't have the right tools or knowledge, now I would have done it differently, I have other videos that show that I keep moving forward and developing manually 😊 and also it's "Custom restoration" buddy

[@churlepatakha]

Excellent, however, the handle seems a little longer as compared to the size of the peen!

[@customrestoration5317]

It's a bit too long, but it's better than on screwdriver 😁 and also I wanna thank you for comment 😊

[@tahiragha545]

I think you have tow channel?

[@customrestoration5317]

No i have one buddy 🙂

[@uzoboy]

İt's not restoration it's 'turning into' video. Turn out completely different thing. I mean where's the marks on it

[@customrestoration5317]

Unfortunately this hammer was very damaged and I couldn't keep the original marks, besides the hammer no longer weighed 1 lb. But you can take a look at my new restorations 😊👍

[@uzoboy]

@@customrestoration5317 i already watched all of your videos. You're doing great

[@customrestoration5317]

@@uzoboy you are awesome buddy thank you 🤗