Restoration super subwoofer SONY 1000W // DIY the coolest subwoofer box

[@ericmcginnis9413]

I love seeing trash to treasure vidios and love to see things rebuilt and reused! Way to go! I'd love to hear them. It seems everyone only knows to throw away and get new but now a days built quality isn't worth a crap with most items, so yeah, wishing certain things

[@Димсун113]

В пр роз

[@filibertofonseca8083]

Great job. Only tip I would give is to secure the speaker wire terminals on the subwoofers better to where they are not moving. Thanks for the video

[@K-Effect]

They look 10x better than the original Sony

[@sascha5668]

Nicht wirklich.

[@wmp0074]

Doesn't look better than the original pentagonal cones. Just looks like a generic chinese market subwoofer now.

[@K-Effect]

@@wmp0074 The Sony subs did have dual spiders and we’re probably built better but my original comment had nothing to do with performance just the looks

[@wmp0074]

@@K-Effect I was just giving my opinion that the original cone looks better because of it's unique design compared to the round cone and thick surround. I did post another comment about not using 2 spiders but that wasn't direct towards you. Nobody is wrong though. You think it looks better and I don't. Just two different opinions :P

[@K-Effect]

@@wmp0074 I completely understand. I never met any disrespect, I can come across very blunt but I really don’t mean too

[@quevicular]

Those are excellent subs. Had them wired to a taramps 3000HD and it was freakin incredible. They never blew up and I drove them hard. Got them in a elite 2x12 box in my van now parralelled to 2 ohm and a small 250 watt amp and they still pound like nuts.

[@萬得羅]

了~

[@萬得羅]

、！

[@nex3296]

Sure. Coz real work power is 300W and PEAK power is 1100W just peak power!

[@fabianomengue8957]

Parabéns, excelente trabalho!

[@davidhamm5626]

I am amazed that you can always get the replacement parts! As always, very well done.

[@lacucaracha111111]

Industry and concert poroducts get replacements, consumer stuff not so much

[@erickelly8704]

Wow totally rebuilding where u get the replacement pieces u literally destroyed the original parts it’s all new 🤔

[@Rostislav-kf7ff]

Класса получилось продолжай также делать!!!

[@Cetrifuga1945]

Bravo suonatore vufer bassi ❤👍✔️

[@thekopipahit]

One of the real restoration video🙏👍👌

[@srikantaghosh1217]

Good look better than Sony original speaker 🔊

[@ibm7867]

Bro Iam from India I like very much your restoration give you a big like and all the best .

[@brorow6821]

Now I know what I should have been learning in school maybe I would have my own business now.

[@grantmackinnon1307]

Niceley done. I didn't know those old sony's had a dual spider.

[@EdwardNakagawa-j6b]

SONY MAKES THEYRE OWN SUBWOOFERS, I HAD A PAIR, 100 WATTS EACH, MATCHED WITH MINI SPEAKERS, SOUNDED FANTASTIC, COULD SHAKE THE ROOF *

[@Woon_Shen_Hang]

Супер сабвуфер Сони на 50вт Скотч и упаковка дороже чем то что внутри :)

[@bibaboba6823]

Согласен) ну там не 50w там рмс 300где то пик 600w

[@ericsheeks180]

A wire wheel would be so much easier than the sand paper. Great job though 👏

[@cheezst8ke]

Evaporust

[@nex3296]

Nice reimagining, but: 1. The real working power is 300 W - attentive viewers saw this on their own sticker. This is the true maximum operating power at which the speakers will work and not burn out! 2. The boxes are too small for such speakers and you can't get a normal sound from them! 3. Painting for rust is a bad idea! Good luck! (=

[@niko.c.v.m...]

wow que lidos esos sorround krenwood no sabia que existian saludos desde argentina

[@rast4man]

This was incredibly satisfying to watch.

[@MrElectricity1111]

thank you

[@ejfrederico]

Excelente trabalho. Parabéns.

[@rifanshaan6677]

Good job bro.i think you can make box nice finished with putty

[@dadygee]

Thank you for leaving in the sound of the router at 11:25 - 13:30

[@marv.mon.9845]

These came out awesome 👍

[@carlosduran2164]

Te quedaron muy bonitas

[@ВладПриз-щ7м]

Круто , подсоединение только , у меня денамик 250 ват там на пружинках

[@Comedy-jass8]

I love this product ❤

[@quevicular]

That poor little green router still takin the abuse. Love it

[@Weber1987]

Better then they originally were lol

[@mkhosirin2393]

Amazing restoration 🎉🎉

[@joseconcepcionfeliciano7364]

Gran trabajo pero para hacer los videos menos pesados creo que no es necesario mostrar como se lijan una por una cada una de las piezas de madera (minuto 7:18)

[@WiKiTWoNKaWeCKoRDS]

19:27 I would have used a wire wheel on an angle grinder to that rust instead of sandpaper, It would have came out a whole lot nicer because you would have gotten rid of 100% of the rust down to the bare metal like you should have And then you should have primed the metal before you sprayed it. other than all that it came out pretty good. though I am a little bit disappointed that they are no longer Sony Xplōde subwoofers anymore😢

[@davidhamm5626]

Maybe 2 in 1 paint, or epoxy.

[@CharlesKelvim-gc5iy]

Gostei muito , so um detalhe eum conselho , bota os fios mais grosso no alto falante so isso , bom trabalho ai

[@aquinosoto2571]

Excelente vídeo tutorial, lo que si recomiendo es, envovinarla bien. Por que sonaba con Rose, lo que significa que el centro magnético donde se coloca la bobina, estaba sucio en el momento de amarlo

[@ayrtonwollert5021]

Exactamente, yo por empezar corregiría muchas cosas, en la canasta del parlante ni siquiera le saco bien el óxido que quedó después de lijar y pinto sobre eso, en un tiempo se le despega el centrador y el cono juntos. El parlante de fabrica trajo doble centrador y el solamente puso uno pudiendo haber aprovechado el otro espacio y ponerle los dos, otra es que la bobina se queda muy chica para lo que es la suspención, y ya siendo un poquito más detallista, el cubre polvos ni siquiera está bien en el centro

[@samynouri7782]

hello what is the name of liquid you put to tear off the glue in the speakers?

[@aarongunter5582]

Bad ass man did a great job

[@t429koeswoyo9]

Jozz❤

[@RadoslawGodzisz]

kawał pięknej pracy

[@frankorandle]

As someone that has re-coned a great many woofers, 1,000 watt woofers do not come with stamped metal frames. It would be cast metal. Those vents under the bottom spider should be covered with cloth to prevent dust from constantly getting drawn into the magnet around the voice coil. If Sony didn't have air filters on those then it is a design flaw.

[@robertholsopple9451]

Skar SVR and many other 1000- 2000 watt plus woofers come with stamped metal baskets.

[@pdr5926]

Nominal power is just 300W.

[@robertholsopple9451]

@@pdr5926 svr not sdr

[@sharukhmatekukikuki2955]

Nice 👍👌 02/02/2023 🇮🇳

[@sandropisic.2637]

Very good job this music is great 👍👍

[@rkangler]

Good job brother 👍

[@osmanromero1169]

That brand was so popular in the early 2000’s.

[@ЮрийКолесник-р7р]

Нехватает нейлонових защит в переди штоб д намики прикрити немножки а так довольно не плохо ,когда впереди есть защита они виглядят более багаче елегантние 😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊

[@jorgem50]

Man I wish I had those skills

[@vovanstukov6518]

Hmm ? And where did you get a new membrane, because the old one was torn?

[@codyjohnson5674]

It's a rebuild kit. You buy it new. DiY cheaper than buying new subs. Also good way to design better subs from old junk.

[@AudioElectronicsChicago]

Excellent

[@Fung_5]

ASMR repair😊

[@noknoktay1]

Nicely done

[@lio2332]

I'm truly impressed! Good work!

[@dennysmichaelhernandezronc2194]

Quedaron espectaculares.

[@woodrowmcdonald2907]

This was really cool! Thanks!

[@492bruce2]

19:30，除锈，可以放入热水中，加柠檬酸（很便宜），煮沸

[@chicoreis5880]

Ja com vocês no KZbin é rápido e prático, nem esquenta os componentes de tão rápido é a solda

[@Egbertoantonio]

Supersatisfactorio Gracias

[@Rickglen670]

Totally impressed

[@robertnewland9730]

If u use a standard paint roller you could save that spary paint and do it all in one step

[@paolavaldez860]

Buenos bafles saludos desde mexico

[@RIGA_90]

Nice 👌 👍

[@entrophany]

use bigger cauge wires. Otherwise excellent job

[@vjnobody]

Thanks :) maybe I can have decent speakers now that I can repair my own.

[@marleensrain]

just buy some 8inch DS18s or SKARs

[@kesavensakthi5705]

Super 😊

[@vuongquang5932]

Hay quá anh, anh có thể làm cho mình 1 vỏ thùng sub thô không?

[@matrempit2885]

Your cable too small will you...? This subwoofer need 4 mm cable...!

[@MsVahidabdi]

Nice job 👍 but I think it's just a replacement and repair not restoration...

[@Hertzstation]

4:30 brother what's that solution you're using? please let us know, subscribed

[@york.oliveros5623]

X2

[@red05malibumaxx]

Hello, love your videos. What is the glue release liquid you use?

[@danielvanmieghem1091]

what is that liquid/solvent you are using to remove the cones / diaphragms etc ?

[@fujie-web]

Good job Guy ;oP It would really be a plus if in the description you write the names of the products used and their references :o) Your Vlog would thus also become a tutorial ... ;o)

[@mikeandrews6543]

Job well done, keep it up

[@aaax9410]

Bravo a terrific job 👍

[@michaelkamau5527]

Always use MDF boss.Always!

[@cyrenecy5117]

boss anu po Yan n nilalagay m pra mbilis mtanggal?sna po mreply nyo aq

[@zoremaralte9217]

Did you replace with the original parts?

[@rovsenkhalilzade]

👍👍👍👍👍 bu cür təmir bizim ölkədə niyə yoxdu🇦🇿

[@justinboone8700]

Any idea on where I can get parts to recone subs that are 2.5 inch voice coil and under?

[@nedstar7378]

Nice job and video thanks for sharing.

[@hoanghung0208]

e có đôi loa 1 bên nghe to đập khoẻ hơn bên kia lại bé là bị sao ạ

[@jorgebiase3348]

Show ameizing

[@DRB-Octane]

recomendo um par de JVC full range 3" pra complementar as frequencias medias e agudas do sistema

[@ricardolopezgutierrez1989]

Saludos de México

[@ramzac1993]

Live you videos brother ,what's that stuff you use in the bottle?

[@williamblackwell9558]

How did you get the T/S parameters to make the correct size box?

[@jonvincentmusic]

The rust on the baskets needed to be neutralised. You can’t just spray paint over the top. After making a nice cabinet you totally f’d up the driver restoration.

[@Nomanrao00325]

Amazing yr 😍

[@vejlivui5313]

Ну лаадно, иии тааак сойдёт😁

[@karolbuda]

Nice job. What you are using to peel off parts?

[@crxxpslvyr7887]

Prob gasoline

[@michaelrosenberg2420]

@@crxxpslvyr7887 Nope Acetone

[@hotice8885]

@@michaelrosenberg2420 , Glad you spoke up about the acetone. Do you have any idea what kind of adhesive he used when he was reassembling everything? I imagine there are a few different workable options.

[@ritanshpuri9230]

❤ great

[@RohitNubs]

Black karpet or black paint which is better ?

[@timothyjethroberana663]

You forgot to doubled the speaker damper to make a hard bass.

[@ИванА4-щ6о]

крутые басистые колоночки динамики просто починить и сделать к ним корпуса сабов и два саба готовы басс круто👍👍👍👍👍

[@gdjohny]

what are the drivers you have put on the top ? any links to them please?

[@flaviaandreiasantarita2688]

0o0

[@ericyates3256]

Respect powerful now it's time to bump

[@lannyfullerjr6956]

They look pretty damn good 👍

[@dr.volver]

У нас разные понятия о реставрации. У нас бы это назвали - рукожопство

[@78RSI]

Или колхоз.

[@dr.volver]

@@78RSI не обижайте колхоз

[@filmctz248]

What's the solution that remove paint

[@rollermoreno1463]

Buenas que liquido utilisas para despegar

[@francescobilotta2661]

Bravissimo complimenti ❤️

[@nhaccuoiduongchuc1452]

Soni Main Japan 👍

[@buster0004]

Nice work, but with so many spray paint videos on YT, I simply can't understand your way if working with that paint gun.

[@soumenpare6277]

Very nice work broo