Restoration & Upgrading of the HMS BOREAS (1774) model #10 - Cleaning up the COPPER PLATES

#olhabatchvarov #shipmodeling
Restoration and Upgrading a ship model of the HMS BOREAS (1774) in scale 1:48 (1,4 m / 55 inch long and 1,2 m / 48 inch tall)...
🎞FUII PLAYLIST with frigate repairs:
studio.kzbin.infoP...
🎞ADVISING on the RESTORATION of the HMS BOREAS (1774):
• ADVISING on the RESTOR...
🎞Book with drawings of this ship - "NELSON'S SHIPS A history of the Vessels In Which He Served (1771-1805) by Peter Goodwin":
• 113 - NELSON'S SHIPS A...
🎞History of the HMS BOREAS:
• HISTORY of the HMS BOR...
🔴Channel's main page:
/ olhabatchvarov
💎Souvenirs for channel fans:
www.youtube.com/@OlhaBatchvar...
🔔You can thank me for filming and editing this video in the form of "LIKES", clicking the "THANKS" button under the video or become a member of the channel here:
/ @olhabatchvarov
🔥Official channel website:
www.shipphotographer.com/
📨Contact me:
en.shipphotographer.com/zvoro...
⛵️GALLERY of my models:
www.shipphotographer.com/galery
🇺🇸🇺🇦

[@giovanniallegro3790]

Read this long personal consideration of mine. I started with modllism that I was 13 years old, we are talking about 55 years ago, I started with dioramas of World War I and World War II winning many national competitions, then I switched to model airplane building gliders, which were difficult to build because you had to pay attention to weight distibution, 3 years ago I started with designing and building artificial lures because I am fond of spinning fishing. Two years ago I started again with model airplane but static. Then I saw you with ship modeling and got hooked. The first (cheap) models were a total disaster and to learn I would rebuilt the same model until I built it almost perfectly, the ones I got wrong I kept in sight to learn from my mistakes.The last model I made was the Lady Nelson, on which I had also been on the rebuilt vessel, but...but...my wife to show it to her grandson, dropped it from the second floor; it held up well enough but the stern was destroyed, now I am trying to repair it and I am sure I will succeed

[@OlhaBatchvarov]

Thank you very much for such a long comment))) My first model also survived the shipwreck. My kitten climbed onto a shelf with books, and then fell together with the shelf and books onto the table where the model was standing. Embracing the galleon with all 4 paws out of fear, he also fell to the floor with it... The repair was long but successful. Although the steering mechanism has become static)))

[@michaelwindle5023]

НАБАГАТО краще без зайвого клею! 😁👍👍

[@peterwright217]

ah coffee time 👍👍👍👍👍top work Olha.

[@heathstephenson3863]

Olah, you have excelled yourself once again. Now, I am catching up with the video builds that i have missed out on. By watching 👀 this video, I thought you were going to do a complete rebuild of the copper plating. Great work that you have done ✔️.

[@denisv4385]

Quite incredible the work it takes to restore this Bordeas. I can't imagine if they were individual copper plates. You did a magnificent job!

[@OlhaBatchvarov]

Thank you very much!

[@kafunkalear]

I'm only 50 seconds into your video and this looks amazing, more to follow

[@OlhaBatchvarov]

Thank you!

[@anguscampbell9311]

For the second time, you’ve given me headaches from me slapping my forehead and yelling “DUH”. That little trick with the rubber bands and clothespins is simply genius. I’m about to attach the keel to frame of my Constitution and this will come in handy. Thanks! Angus in New Mexico

[@OlhaBatchvarov]

)))))) I am glad it was helpful!

[@igormanuilovich1422]

Благодарю

[@davidrasch3082]

I watch this series, first time withut sound, making note of the tools and supplies used.

[@OlhaBatchvarov]

I'm glad you found useful information here!

[@robertsalanon2909]

Ohla est une pro de la maquette !! Restauration profonde de ce navire , pire que du neuf !! Félicitations ...

[@OlhaBatchvarov]

Merci!

[@B747-4OO]

Excellent, well done! 👍👍

[@OlhaBatchvarov]

Many thanks!

[@markkremer9917]

You must have the patience of a saint.

[@type2280303]

That is an absolutely outstanding work done there Olha on cleaning the copper plates :o This looks sooooooooo much better now, was really worth the job don there. I love the little trick with the rubber bands to hold the keel plating, never would have thought of that, thanks for showing us this, will be useful !!!

[@OlhaBatchvarov]

Thank you very much! I am glad that I was able to show something useful))

[@tedr.]

Good morning!

[@mustapha3668]

Good morning OLHA 🎉❤🎉❤🎉❤🎉

[@williamdowda4265]

At first I thought you were taking all the hull plate off I'm glad it was not needed.

[@viktorasavgulis1669]

👍👍👍👍👍😺🎄

[@martindb5677]

Great restoration work Olha. Well done 😊

[@eduardosuarez4239]

Olha increíble restauración, eres excelente maestra del arte naval.....🇲🇽🇲🇽..

[@OlhaBatchvarov]

¡Gracias!

[@genojoe3176]

Beyond words! An amazing transformation!

[@OlhaBatchvarov]

Thank you!

[@frankgaletzka8477]

Well done what a amount of work until the Model is ready in all his beauty. Have a nice weekend a peacefull christmas Time and a blessed New year 2024 Yours Frank Galetzka

[@OlhaBatchvarov]

Thank you Frank Happy holidays to you too

[@lidialidia6981]

Nice video, bravo Olha 👍 good job!!! Thank you very much 💙💛 good luck 💞

[@OlhaBatchvarov]

Thank you!

[@optimus.k3365]

💕🎄👍🎄❤🎄👏🎄🎁

[@CAPNMAC82]

Hmm, wonder if the mystery glue is "ambroid" a form of plasticized celluoid popular for canoe repair at the beginning of the 1900s

[@OlhaBatchvarov]

This glue is not known to me)))

[@francisgraviou9811]

Superbe, très beau travail Olha 😊

[@angelcascales1082]

Que gran trabajo, y paciencia!😊

[@1banana25]

Very clever!

[@loken67]

Hello Ohla, as always a great pleasure to see your expertise at work. The rubber band trick for the keel is quite ingenious. The colour of the replacement tile is a bit lighter/brighter than the existing one. Is there a way to help this (maybe chemically ?)

[@OlhaBatchvarov]

The chemical way is not worth it, because after a few years the opposite will happen and this part will be too dark... After 3-4 years, this copper will age on its own under the influence of ultraviolet light!

[@loken67]

😃@@OlhaBatchvarov

[@jameskrauzlis2634]

You have showed us all again a masterful treatment of restoring this model...i have learned so much from your various videos, thank you! I have one question, once real copper plates are installed what are your thoughts on the final finish? Do you prefer a gloss dinish or a matte finish for the copper plates? Which is most accurate for a historical presentation of the copper bottom? Thank you for your time in considering my question.

[@OlhaBatchvarov]

Thank you very much! In general, it is best to use cellulose lacquer. Under a layer of this lacquer, copper plates age naturally in 3-4 years, without the use of any fake patina. But before applying the lacquer, it is necessary to clean the copper well from all possible fingerprints (they are not immediately visible, but they can appear in the process of oxidisation). So I use a precious metal cleaning fluid like jewelers use. Also, copper can be polished with scotch-bright, steel wool, etc...

[@jameskrauzlis2634]

Thank you very much for your prompt reply!!

[@brianmallon5603]

Again, I admire your skill and patience. Could have been worse. They might have used duct tape!!

[@OlhaBatchvarov]

By the way, when was the duct tape invented?

[@brianmallon5603]

1943 apparently🤔

[@angelcascales1082]

La cola caliente, de pistola, no se puede usar? Aún no he visto a nadie usarla.

[@OlhaBatchvarov]

No, este pegamento no es adecuado. Y la razón más importante es que este pegamento no es reversible y el espesor de la capa de aplicación...

[@angelcascales1082]

Muchas gracias, que suerte tenemos de tener a una profesora que nos saque de dudas!

[@carlosalbertocarlosdelgado3697]

lámina de cobre calibre 30 ?

[@OlhaBatchvarov]

0,035 mm

[@cajunrandy2143]

👍👍👍👍👍

[@rodekern5380]

Can you show how to rig a studding sail

[@OlhaBatchvarov]

Petersson shows the basics for this type of sail (issue #052 of the shipmodelers' library playlist - Rigging of period ship models by Lennarth Petersson - Square-Rig). But more details can be found in the anatomies of ships. Depends on what are you building?

[@42_travel]

На який клей було приклеєно і на який переклеїли? Скільки часу прошло з моменту як було вперше наклеєно? Дяка

[@OlhaBatchvarov]

Десь тут в коментарях один з глядачів добре описав що то був за клей. Я так зрозуміла він був дуже популярним серед моделістів в 50-60 роки. Зараз його немає в продажу. Я використала Barge All-Purpose Cement, аналогічно як наш Момент-1. Описання є в субтитрах, не забудьте увімкнути автопереклад Українською...

[@user-pv3mu6ow7v]

Вітаю Вас з наступаючим Різдвом Христовим Та Всю Вашу родину ,всіх благ процвітання в задуманих проектах ,😀👍🏻👍🏻👍🏻👍🏻👍🏻🎄🎄🎄🥇Кропітка робота розбирати мідні пластини ,але мене більше зацікавило правильність накладки пластин ,багато в мене було помилок при обклеюванню дна HMS VICTORI 1-84 .Можливо деякі нюанси з цього відео мені допоможуть ,дякую з повагою .👍🏻👍🏻👍🏻🇺🇦🇺🇦🇺🇦🌲🌲🌲🌲🎄🎄🎄

[@OlhaBatchvarov]

І вас з наступаючими святами!

[@user-pv3mu6ow7v]

Дуже гарно дякую ,успіхів ,з повагою 👍🏻🌲🌲🌲🌲🇺🇦🇺🇦🇺🇦

[@suke34]

こんにちは～ 語学力が無いので、日本語にて失礼します。 銅板を剥がす時の道具は、ヤスリをリメイクしたものですか？　もしそうなら、素晴らしいアイディアです。 早速、私も試してみます。　日本には、ワンコイン(１００円ショップ)なるものがあり、家事で使用する物が、工具として使えるものが、多々あります。私も利用してます。 また日本には、竹という、素材があり、視線を変えれば、道具にもなります。 今回の工程は、リメイクを主体にしているようで、私も見習いたいですょ。 本当に語学力が無くて、ごめんなさい　m(_ _)m。　少しでも英語で会話出来るように、精進します。 貴方様家族に、幸、多かれを祈ってます。 　　　　　　乱文にて失礼します。

[@OlhaBatchvarov]

ありがとう！ はい、これは以前のミニファイルです)))