Restoration Rusty mechanical watches | Watchmaker reparing old Watch

[@joshuawalker7054]

My favorite part was when you swapped out the rusted watch with whole different one during the "cleaning" process. That was amazing. I mean, it's the best way to get rid of the pitting and delamination. Oh and getting everything shiny without a polishing wheel. Top notch work!

[@dixidm310]

🤣

[@684W13]

Exactly

[@marciojosecruz1458]

P

[@balajay8921]

Just goes to show, in this new world of social media you can money from anything...

[@dorfschmidt4833]

See, he did entertain you, that's something.

[@jeffnewbill5599]

He ordered 2 cheap Chinese made watches , put one outside for a month while he took the new one apart and put the balance in a bag to make it look like he ordered it, (they don't come in a plastic baggie) cleaned some of the parts of the dirty watch then did the old bait and switch with the new watch and parts and put it back together. This is probably what he does with every "restoration" $40 for 100k views.

[@Thehorologicalone]

It was entertaining to watch but I quickly spotted the old bait and switch, then this video became very disappointing. Those cheap Chinese movements would be scrapped at the site of any rust, nor could they be recovered from such water ingress and corrosion.

[@willclark8962]

I think it cost me less than $25 shipping included. I only wanted it for the case.

[@OldSkoolF]

There is a dent in the main plate near the ratchet wheel.. It is gone in the rebuild... The only thing left from the first watch was the rotor bridge. There is a scratch that runs 45° from a screw hole that is visible in cleaning and rebuild... I noticed he paid attention to the oiling chart as well... LOL

[@entertainmentunlimited3256]

He also removed the strap before putting the watch in mud water

[@benerabilis]

And he oiled an greas nothing.

[@Danny2k34]

These would be much better if you just started from here (1:08) and cut out the whole "finding" the item which comes off as so fake.

[@angelinaribeiro688]

5

[@kirkin5258]

no cap

[@itsyaboinginda5841]

adds some story, its just showmanship

[@MichaelWilliams-mo1vv]

Was thinking the same.

[@telelaci2]

I love as he removes the thick rust layers slowly with patience, simply using soapy water and a soft brush, and at last you can see the text: STAINLESS STEEL

[@sintokarona]

Больше всего меня поражает не то, что этот парень находит каждый день Ролекс на помойках, и даже не то, что он беззастенчиво меняет корпуса и части деталей на новые, а то, что удивительно большое число людей принимает это за чистую монету.. Товарищи, господа, это не реставрация, это - фокусы. И никаких тут вариантов нет. Постановка

[@vikingmihinlank969]

А намагниченные отвертки, Вас не поражают? )

[@HousePlantswithLoveUA]

Это китайский ролекс, уверенна, его стоимость быстро окупается. А часы ради продвижения канала можно и состарить. А то столько часов на помойках попробуй найди ещё

[@maxmisharin4246]

Ты совершенно прав!

[@dirkpieper3694]

Genauso ist es. Und der Typ gibt Dir noch ein Like für die aussage. Voll durch der Typ. Checkt nix.

[@stavboy69]

и лайкает все комменты подряд ( а главное - даешь еще больше воды в реставрации ... больше воды ((( бредятина, блядь (

[@Strenam]

Assembling a watch on a towel and not using any oil in a movement. Amazing magician this guy...

[@michaelgray1976]

Boy you have a lot of patients to work on that it had a lots of small parts good job

[@ЕвгенийВласов-п3л]

Прикол в том, что разбирает и собирает двое разных часов, об ясню, так как он чистит ему бы руки оторвали, в том состоянии китайский механизм мертвяк, а собирает он новый механизм, красавчик, всех надурил.

[@rinatidiatullin7347]

С чего ты взял?

[@butosloventus]

классика жанра у него)))))

[@shabakaevkostya]

Дурят народ....

[@shariptimur8705]

Он рекламирует инструмент часовщика с али экспресс !

[@alvinaslt]

Это одни и теже часы.Только монтаж сделан так.Вначале соберает мехонизм хороших часов,потом часы гноит,разбирает и чистит. Монтаж ивид того что ремонт.

[@miguelangelaltamiranooliva6854]

After the arduous and laborious restoration of a perfect job comes the enormous satisfaction of being able to show off that beautiful watch in all its brilliance!! Wonderful!! Here in Lima Capital!!

[@ЛеонРусаков]

)))) Хорошо отмывается яблочное повидло! )))

[@こうちゃん-r3l]

この国ではよく散歩中に時計を拾うなぁ　物を大事にしないんだな😂 良いなぁ機械式　実に美しい🥰

[@RyanProbert139]

ahhh, the days when rust would just wash right off and you'd spend a week fixing a £10 watch.

[@painexotic3757]

This isn't a $10 watch..

[@RyanProbert139]

@@painexotic3757 hmm. Apologies - $18 = £10 gbp roughly. Hardly worth the effort!

[@shelliemay5578]

​@@RyanProbert139 He knows that his efforts are not worth it. He shows off his technique in this video, and makes more than $ 10.

[@entertainmentunlimited3256]

@@RyanProbert139 he put the new watch in water for several days for making this video

[@entertainmentunlimited3256]

@@shelliemay5578 he put the new watch in water for several days for making this video

[@John1doe]

Fantastic job love video 👍👍👍👍

[@AndyHullMcPenguin]

Where to start... Well it isn't bad for a first attempt, but it certainly wont win you any prizes, and the watch wont run well. 1) The watch didn't get any lubrication. All that cleaning will have removed some of the dirt, but it will also have removed all of the oils and greases. 2) The mainspring was not removed from the barrel and cleaned. I've got a little bit of experience here, so I know what I'm talking about, If this watch had genuinely been in the water long enough to look like that, then the mainspring will be rusted in to the barrel. It needs to be removed from the barrel and at the very least, cleaned, lubricate, and re-inserted into the barrel, but most likely if it is in that state, the mainspring will need replaced. 3) Very important. Any competent watch maker would re-fit the hands at the 12 O'clock position to ensure they line up correctly. If there is a date complication, you need to wind the mechanism to midnight so that the date just clicks over, then fit the hands at the 12 O'clock position. 4) The balance is usually sold as a balance. Not as a balance and balance bridge with jewel. You unscrew the retaining stud from the old balance, remove it from the bridge, and fit the new balance. Fair enough you *might* be able to source the balance and bridge from a scrap movement, but mostly, they come as a "balance complete" which is just the balance on the balance staff with the hairspring. In some cases, you can source the balance, hairspring and balance staff as separate items. 5) The balance jewels were not cleaned. 6) The other jewels were not cleaned. 7) Did I mention. Watches need to be oiled. This includes the balance jewels. Both of them. They need to be removed, cleaned, oiled and re-installed. Not an easy task. You need to remove the shock springs, remove the jewels, split them into the two parts, clean the through hole jewel, lubricate the top of the non pierced jewel, re-assemble them, refit them and then refit the shock spring. 8) You need to test the watch with a time grapher, or time graphing software to set it back in beat and set the rate. If you want to see an automatic Chinese standard movement like this, being serviced for real, and a whole lot of other watch repair techniques, you should check out Mark Lovick's channel on KZbin. kzbin.infoabout This is not a criticism, I'm simply pointing this out in case you, or anybody watching wants to improve their skills in this field.

[@AndyHullMcPenguin]

In case you are struggling to find the Chinese standard automatic watch I'm referring to then this "Starking" branded watch is pretty similar, though it does include a date complication. There are some other Chinese movements there too. kzbin.info/www/bejne/gpCol5SobKmfr9k Also watch the Chinese "Seagull" movement videos.

[@dmhor7389]

Andrew - you’re giving him more credit than he deserves with your in-depth critique. This is not a restoration video, as I’m sure someone with your level of knowledge is well aware. This is designed to fool people with no knowledge of horology and is to restoration what clickbait news is to real journalism...

[@AndyHullMcPenguin]

@@dmhor7389 If anyone came here to see how this *should* be done, then my comment was intended to assist them. That includes the original poster of the video. It does take time and effort to create content, and to my mind, any comment about that content should be positive, even if you have doubts about the authenticity of what you are watching. I could have simply gone off on a rant about everything that is wrong with the video, but that doesn't really help anyone, particularly those people who are watching in the hope of gaining insight into how to service a watch correctly.

[@KENHEART]

Good job ! 👍👍👍🙏

[@maolon8362]

*Excellent Work*

[@Fabbricatore69]

what products to use to remove rust??? thanks

[@luisinatorres8382]

I don't know how he does it but he always finds treasures, and his magic hands bring them back to life

[@carstenpedersen3200]

Because it is fake as fcuk..

[@pertamax3721]

just for content

[@lahouyousif9153]

You good bro 👍👍👍

[@jeremyyeo1510]

Repairing movement on the cloth . You are really most talented on earth !

[@ghile4988]

Siep qua cho e di a dep qua ah

[@VYSOTDAILY99]

Wow good 💟💟💟 video

[@mufer9]

Incredible .... very impressive ... ! How many days did it take to completely restore it ... ?

[@vinay9660]

Still giving hearts ❤️❤️❤️ Great 👍👍

[@kevinmonette6238]

I love skeleton automatics, that's what most of my collection consists of, it's a beautiful time piece

[@unyein3793]

M

[@lautaroperdomo]

M

[@simsn8340]

Du bist ein Künstler, echt!!!!!

[@joshsoper162]

The fact he didn’t open the main spring apart shows it’s fact , if that was outside truly for an extended period of time it would need taken apart cleaned and greased

[@Richard_2022]

Beautiful, excellent....very very beautiful...🙂👍

[@vvp8120]

😳Great job❤️

[@dodgesportsman772]

Super nice!

[@하나남은이빨]

I'll watch it. Cool video.

[@RestorationVS]

Wow Good Restoration Old Watch 👍👍

[@dixidm310]

Give these people an Oscar!

[@유소영-x6i]

미쳤다 진짜.....와...무슨 프라모델 조립하듯이 하세요?!

[@dmhor7389]

Oh please... The mainspring hasn’t been removed and cleaned, the inside of the barrel would mean it would likely never work again in that condition, no ultrasonic bath, no apparent pitting or damage left by all that rust (you do realise rust = damage?!), no lubricants whatsoever in the reassembly - not even a greased gasket (what oiling chart did you use?), the crystal is flawless after a wee wash and the watch case shines like new without the aid of a polishing mop - and that’s just for starters. Not to mention ‘rust’ on a stainless steel back!! I wonder what a true artist like The Nekkid Watchmaker would make of this fairytale? And I suppose that’s the only time in your life you’ll ever be mentioned in the same sentence...

[@Mrkrazyjuggalo408]

I would love to stay and read but lost me at never work again lol

[@jeram40]

power of video editing

[@dmhor7389]

@@jeram40 - the power of trying to con people

[@mrobe48942]

Well this will be only video I watch on this channel. Taking people for fools, what a con.

[@Mrkrazyjuggalo408]

@@mrobe48942 that's what's up let everyone know you will not be coming back when you could have done that with out commenting lol Good for you lol

[@MuhammadFaisal-sv3jm]

Good job 👌 very nice work

[@johnhawa6907]

Giving a heartbeat to the machine 😃❤️

[@new-rj7xu]

kzbin.info/www/bejne/goewo2eDaNWigbs kzbin.info/www/bejne/bne3iIuef9-fatU

[@busterbiloxi3833]

Incredible find. Unbelievable coincidence. A masterpiece. I like the food preparation sounds in the background.

[@TheBeambow]

WOOOOOW ez a rozsda elképesztő látszik hogy régóta képződik az óra fém részein de egy kis JÁR és a rozsda alatti fém felpolírozva megmaradt .... :D :D :D

[@jacotache674]

EXCELENTE DEMOSTRACIÓN DE "RESTAURACIÓN" PROFESIONAL....

[@Ba_Yegu]

I got a Sarcasm...

[@RANIYAAMAHILA]

Just put ma hand

[@RANIYAAMAHILA]

Montre atomotic dans à mais

[@vincely7756]

Expertise.nice work,well done

[@beneditoalmeida3275]

Olha o camarada desmonta um relógio desse cheio de peças miúda e depois monta e deixa o relógio trabalhando merece nossos parabéns tende ser muito bom

[@fcos_sd]

Buy the watch price?

[@airmaxfpv3107]

I love your channel, i just have a question, where do you find objet to restore?

[@lucyr8711]

Don't you watch the beginning of each video? In his country shit lies everywhere and you just have to go pick it up. Simple

[@분홍빛향기-q4h]

Good~! Great~! Wonderful~!

[@aist60]

Чудо какое то аж не верится.....часики как новые.....привет из Москвы!!!

[@TheVolonterr]

конечно, не верится. Ничего даже не заржавело - водой промыл и порядок.

[@cessnaflyer]

Great work!

[@jaimemontaner3801]

I see so many things wrong with this. He never dismantled the main spring, he is working on top of a towel that could introduce fibers to the movement, he never used the proper oil on the jewels, ect.

[@georgesmbyd6603]

Its a 15$ watch dude lmao

[@barrycarlisle4511]

I'm new to these watch videos. What purpose do the jewels serve?

[@jaimemontaner3801]

They act as bushings for the moving parts

[@shareefshah6997]

Great work

[@MrKenny777]

I'm amazed you spent all that time and devoted your considerable skills to repairing a watch that currently retails for £14. Brilliant work though - and I thoroughly enjoyed the video.

[@michaelbrownlee9497]

Might be worth 2weekd pay for him.

[@Skif0007]

Greatest man, it's incredible

[@Peter-xf9jy]

funny how the glass is broken and gone but the pointer are still in place XDDDD

[@new-rj7xu]

kzbin.info/www/bejne/goewo2eDaNWigbs kzbin.info/www/bejne/bne3iIuef9-fatU

[@SK-ji4nr]

Great job......

[@alextrishin6443]

Мне как часовщику тяжело смотреть такие видео, после той ржавчины в механизме вряд-ли бы они у него запустились. Разобрал одни часы, собирать начал совсем другие

[@ДмитрийКудинов-э7я]

И никакой химией ее нельзя устранить?

[@Sany-K]

@@ДмитрийКудинов-э7я Механизм может насквозь праржаветь бесполезно чистить.

[@user-ztghR65Dtsk]

@@ДмитрийКудинов-э7я Устранить можно, но восстановить до нового нельзя. Будут рытвины. Значит надо снимать до сплошного. На коленке не сделаешь. При таких глобальных повреждениях сомневаюсь что ему это удалось. Собрал из новых деталей.

[@prk6099]

Берёшь новые часы разбираешь собираешь, потом разбиваешь и снимаешь типо нашёл, "узкоплёночным" заходит. 👍

[@Alex_R88]

еще идет такой и хоба! часики...типа искал медь, а нашел золото))

[@-NguyenLongNhat]

Chú là Người Việt Nam đúng ko ạ . Cháu rất thích những món chú sữa lại😀😀😀

[@zaidalielarabeloco4070]

I love watches, and of course this was not the exception.

[@antiquesandclocks.inc.8368]

Same

[@perezperez7933]

👍 estupendo amigo.

[@손성식-l8n]

마음도 착하고 기술도 좋고 대단하십니다 👍💯😍

[@Taya_son]

Согласен с тобой 🤩🤩🤩🤩🤩🥇🥇🥇🥇🥇🏅🏅🏅🏅🥇🥇🏅

[@sagacomonmagpie]

観たかったのはこれ！凄いの5乗倍くらい凄い。職人というか天才レベルですね。トリックならむかつきますが真実ですよね？疑いたくなるくらい凄い。何度か繰り返してみ見たいです。有難うございました。。

[@brianrusso8018]

Nice job. Looks great!

[@aryanmehta9514]

Awesome.. What's the spray did u use to remove Rust?

[@raixupokemonpikapika2694]

"finding a watch" that is totally scripted

[@garyhoffman503]

This for Me was walk with mindfulness of the artist/watchmaker. A natural high knowing that your with the master.

[@Taya_son]

Самом сможешь

[@seryoga940]

It is hard to believe that walking along the embankment in broad daylight you can find such unique things that literally lie under your feet!

[@gesie0504]

Or is it? 😏

[@yerpster]

It’s cap

[@melody3741]

It's fake

[@Mrdddonggo]

Really cool Good design Why throwout this watch?

[@juliocesarrangel9137]

Simplesmente SENSACIONAL MEU BROTHER MUIIITOO TOP

[@GirishJois]

Fabulous 👏🏼👏🏼👏🏼

[@miitar]

I love how fake your videos are! You didn't clean the rubis, no lubrication of essential parts. You didn't disassemble and clean winding part, rust in your case doesn't etch the metal, and yet everything works perfectly. Excellent. I wish it could work your way...

[@TDIMAXDIESEL]

I think he bought another same watch and swap the new mechanism in it, it was way too Rusty to work again! Loll

[@jasperbowmaster5038]

@@TDIMAXDIESEL good ol bait and switch

[@wmustafatube]

@@TDIMAXDIESEL these fakers do the video backwards. They film it new then add rust dirt and assemble the video in the right order

[@garethwillis]

He hearted your comment, what a troll 😂, that or he doesn't speak English.

[@andredias6125]

Top! 😎👏🏽

[@ChrisDart4232]

As soon as he started I was thinking - screaming - take the hands off first!!!! Nice job though.

[@nharevinhomes8785]

Quá đẹp. Cái này có bán ko ad oi

[@joshsoper162]

Nor did he take apart the main spring if it was truly found outside the spring would need cleaned and greased no lubricant was added to the jewels or the jewels cleaned the train wheels all need lube the keyless works needed grease ,but it is impressive thst he can take them apart and reassemble them ! He needs to concentrate on his skill set and make legit videos of servicing mechanical watches and do them correctly

[@sniperdequintal7741]

Art master congratulations

[@mysticlv1]

So many questions. You did not show 3/4 of the process, what were all the parts you actually replaced? What was the lubrication process? Where is the time graph? Did you really expect us to believe that you just happened to find this rebuildable skeletonized automatic on a Sunday morning stroll? How is the gold plating so pristine after all that rust? What an interesting procedure you have for "Casing" the movement. Your video is missing basic process fundamentals that even armature watchmakers or DIY modders use.

[@realdaybreaker8013]

It's simple, he swapped this rustic watch for a new one

[@utamanews7502]

Best restoration

[@ВСЕГДАГОВОРЮПРАВДУДАЖЕКОГД-ч5ч]

Пойду пошарюсь по помойка ,может найду часы Картье или какой нибудь Бригет , уверен что они там валяются ! ☝️😂👉⌚

[@gregoryclavell7847]

Wow he is the best,,,he is King restoration 🤷💪💪💪🤷

[@dmhor7389]

No he’s not - if that’s the same watch, fully restored, then I’m the Queen of Great Britain... P.S. - To give you a helpful clue, I’m NOT the Queen 😉

[@666impreza666]

Great fake restoration. Theres a nice volcano inItaly where youmcan find rolexes...

[@navajkhalifa4980]

Greatfakerestoration.Theresanice

[@mujusr8092]

@@navajkhalifa4980 vvvv

[@Mrkrazyjuggalo408]

And yet you're here lol most love his vids

[@madmanmechanic8847]

very nice job but why didn't you lubricate the jewels and movements you just left all of dry ?

[@josephile]

After removing the rust, it said stainless steel on the back.

[@maszkalman3676]

also waterproof which would be if he doesn't take out the front glass...

[@bangrahmat1991]

Keren bro!

[@КорнейКучовский]

Где реставрация машины?

[@naadcomp]

Nice job

[@GERMAUG]

FAKE, es un video trucho, esos relojes los dejan en un proceso de oxidacion por meses, que al no ser natural despues sale mas facil, y lo hacen pasar como que se lo encontraron..

[@atentoful]

De acuerdo con tu comentario. Los pujidos de una actriz porno son mas reales y verdaderos que el "trabajo" de este "artista", yo mejor me desuscribo.

[@Kayzelos]

El sanatina saygim var ama arkasinda camera ile bi sey arayan adam?? ve saat bulmasi ve saatin 3-5 dolarlik china saati olmasi beni uzdu. cok kolay anlasiliyor kurgu... bu saatden 2 adet alip birisini paslandirip eline koymus gibi bulmasi.. ve sildigini gosterip yeni saati tekrar monte etmesi.. Neyse yeni de olsa o kadar kucuk parcalari birlestirip emek verilmis ve guzel monte edilmis. Bunu yazarken 3. bi saati de mi vardi acaba diye dusunmeden de gecemedim..:)) montajdan sonra 3. saat calisir olarak gosterilmis midir acaba..:) Sabir ve emegine saglik der gecerim....

[@instrument7]

Fake video!!!!!!!!!!!!!!!!!

[@itachi3966]

How did you say that its fake

[@granumuse7847]

WOW!!! What a watch!! And at the top, what a restoration!!! 😍💖

[@boza4477]

what a fake story you think :)

[@gopalakrishnanramaswamy6562]

What powder is used to clean the parts?

[@kellysdad2326]

This is what a real & passionate watchmaker looks like.. He has so much respect in handling watches irrespective of what kind of watches, whether cheap or expensive, branded or not.. He's a true watchmaker who can't stand to see watches that have dumped and treated as waste, but loved to fix no matter what... You're a gem brother!!!

[@jajahgadis]

A true watchmaker would never dip a watch in water or use wd40 to clean it. He bought a cheap watch and made it look rusty.

[@milagrosomeping1152]

Very patient but good result.

[@waynenickel9070]

Unbelievable restoration! Seriously, I don't believe it 🤔

[@i.......m.......u..8471]

I like the watch that you assemble

[@philippbretzler7687]

I'm not sure if he fakes. The cuts and edit is treacherous. Rust and scratches and then miracle miracle all is gone with a brush. That puts a Swiss master watchmaker to shame.

[@Cristiano286-x6u]

Show 👏👏👏👏👏👏👏👏👏🏅

[@gregnpatanderson6643]

i didn't see you oil anything why

[@lucialima781]

Belissimo Parabens👏👏👏👏👏

[@MultiSupergogeta]

No oil, no grease…might be a high precision watch.

[@vito6298]

Ржу-немогу! Я у мамки часовщик! :)))

[@alexandrejosedearaujoperei1008]

Parabéns artesão!! Muito bom.

[@odankwarnerin4498]

Bisaan uy sagala bisa

[@joshsoper162]

I like watches that let you see the motion works parts through the crystal , it shows the mechanics of it and how amazing the lil machines are

[@sonisanu7009]

This is a amazing watch plz watch name plz