Antique Dump Truck Restoration Project // P2- Completely Restores and Upgrades Dump Trucks Like New

- Facebook: / wtteamwoodworking
- Instagram: / wt.teamhd
- Contact Me: [e-mail]
Antique Dump Truck Restoration Project // P2- Completely Restores and Upgrades Dump Trucks Like New
Welcome to my Restoration Skills channel !- a enthusiast for restoring antiques and used items. Living and working in Vietnam, I've discovered a particular passion for seeking, restoring, and breathing life back into items that have fallen out of time. From antiques to everyday objects, I believe that each item has its own story and deserves to be preserved and restored. Behind every restoration product is passion and dedication. I see them not just as old objects, but as artworks with historical and personal value. Through restoration, I learn about and respect cultural and traditional values, as well as contribute to preserving the significance of these objects for the community and society. I hope that by sharing my restoration actions, techniques, and experiences, I can inspire and call on everyone to join the journey of restoration and preservation of culture. Please follow me on this journey to explore and resurrect cultural treasures through our small contributions. Thank you for your support. Let's create a vibrant and social community for restoring antiques and used items together!
Do not copy my content to other platforms without the author's permission. The channel is managed and protected by WT Team.
#Restore #Restoration #Restoring

[@anthonioscotland1842]

Beautiful, I would buy it right now 👍👍👍

[@restorationsskills4967]

Thank you very much

[@daitran5674]

Perrfect

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@hugben235]

Good jod🎉🎉🎉

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@digamberthorve106]

आपली सगळी मेहनत पाहिली.ज्याच खावं मीठ त्याच काम करावं नीट.आपली चांगली विचारधारा आहे.

[@restorationsskills4967]

Thank you very much.

[@user-gt8tw2hq9h]

احسنتم ياصدقاء

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@chuckriggsjr.6021]

Not doing proper adjustments. Didn't even replace the tires. Hope it was extremely cheap.

[@TuoiTran-ys9tq]

Good job 🎉🎉🎉

[@restorationsskills4967]

Thank you very much.

[@sharongayle5150]

Let’s get to work!!! I think it’s fabulous!!! Two seater, a shovel on board and sporting a Louisiana license plate on the nose!! 2 thumbs up!!! 👍🏻👍🏻

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@pamelasteburg6006]

Pretty sweet!

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@user-pm9oq7kc5z]

Goodjob

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@JoseAntonio-kc1so]

Hola si la sacas para fiesta le sale novios, 😂

[@bernielowe3709]

I must agree that this is a video on what not to do!!!!!!😊

[@restorationsskills4967]

Why so

[@akaretnikov]

Ннда.... если это и будет работать, то очень недолго. Главное - все покрасили! Все! Привалочные плоскости, резьбы, посадочные отверстия, масляные полости. Собрали на сухую, без единой прокладки, подшипники молотками позабивали, колеса конусами наружу затянули, шкворни заварили... а, главное контент запилить!

[@user-ky5jg6ms1w]

영천곰식자재마트

[@user-kz8mo5is4y]

ทำดีๆๆ❤😂🎉

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@jacobuspetruspayak1580]

Excellent job but only the exaust silencer is too low to the ground.🤠👍👍

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@jailsondasilva223]

Restaurado caminhão basculante 😉

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@MechanicAvenue]

Keep it up 👍

[@garrycrompton3381]

Wheel nuts are on back to front.🤔

[@garagemslzv8465]

Tops

[@restorationsskills4967]

Thank you

[@gregb76]

great job guys it looks new again.

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@user-wf2el3ri6u]

Молодцы ! Отлично справились с рестоврацией этого симпотичного моторольчика ! 👏👍🎊🎉🎊🎉🎊🎉🎊

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@131dyana]

Wow thank you for sgharing your talent with us.

[@patrickrooney5130]

Just one word. Brilliant.

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@kennethkingery2586]

nice work vehicle.

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@Manufacturingsite1]

Amazing work

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@user-hd3dq1wj1c]

A softer seat would have been nice but other then that nice restoration...

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@donnyomandam6557]

Master Chief mechanic good job 👍😊

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@masterQ20]

Great congratulations

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@RestorationVideo]

I've been waiting for your part 2 for a long time! The dump truck has been restored 😉 Great. You are truly a talented person

[@restorationsskills4967]

Thank you very much . Your video is also very good

[@johneire5016]

And the wheel nuts .

[@user-ky5jg6ms1w]

하양미용실

[@Tatal.b]

Sensacional 👏👏👏👏👏👏👏 muito bom parabéns, a toda equipe

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@Tatal.b]

​@@restorationsskills4967👍👍👍

[@reefer2917]

I can't believe you put the brake lines and the tyres back on!! :-O scary stuff,

[@donaldoyler2092]

Nicely done

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@FrankWieczorkiewicz]

Glückwunsch, den Wagen habt ihr super aufgebaut Es hat richtig Spaß gemacht. Zu schauen, Danke ein toller Film.

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@ranielwinter9984]

👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼✨👊🏼🕶...

[@magausausa]

good video guy

[@restorationsskills4967]

Thanks friend

[@rubioatl7883]

Tires log-nuts are wrong

[@restorationsskills4967]

How can you be wrong?

[@user-fw4kt7cl3p]

Beautiful job

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@user-fw4kt7cl3p]

@@restorationsskills4967 your welcome and merry Christmas

[@jdhdh123]

Классный грузовичок 👍👍💪 хочу тоже такой подари мне его😅😂

[@restorationsskills4967]

Please send us your address. You will receive it in a few weeks

[@jaysanders7472]

You really need to invest in a respirator for all the grinding and wire brushing of the rust. Those paper mask are not really any help

[@restorationsskills4967]

Thank you for your feedback so we can better improve future products. Wishing you and your loved ones good health!

[@Panhhuachan25]

I've been waiting for your part 2 for a long time! It's great that I get to see what I've been waiting for!

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@PkTrucksVlogs284]

Nice Work ❤

[@restorationsskills4967]

Thank you very much.

[@jcamisa50]

Excellent job !!!!!

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@PaulHigginbothamSr]

What torque do ya'll set the heads. Whatever we can get with 5 people standing on it!!! You think we aren't strong? Well think again. Good job.

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@user-mo3sl4ph7c]

А смазывать перед установкой ВСЕ трущиеся детали(включая подшипники!) не пробовали ?

[@restorationsskills4967]

We have lubricated all the rubbing parts. you need to take a closer look

[@thomasputnam4491]

You forgot to put the rubber seal on one side of the wheel cyclinder on the left side of the rear end..

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@kim2holm]

Renovering af en trehjulede bud knallerter, det er godt nok ikke en Piaggio Ape men den er da trehjulet !

[@natinoterry7519]

He is good! I wish he can up grand my eletric handicap wheelchair! With big tired and speed and able have someone rideon back by stand and extra battery for long use

[@restorationsskills4967]

Thank you very much. If possible we will do it for you. Wishing you good health. Please follow and support us!

[@FranSoose-yf3ex]

No grease used on any gears or shafts Pressing in bearings your way is a sure way of damaging the bearings . This shows that one ones doing this work aren't true mechanics or restore restore ones

[@philippedubuisson2383]

un grand bravo pour ce travail et ce tres beau resultat

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@slavonacss]

Odlično 👌

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@michaeldavid4227]

Congratulations friend, great job from Brazil following your channel 👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@user-dj3ui8dd7l]

Так вот ты какой, китайский танк!

[@CREPOZOIDLEMORBIDES]

BISOUS BONJOUR DE LA FRANCE BIENVENUE JADORE CONTINUER MERCI

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@pofrof4910]

How can you make a good restoration without replacing all bearings? And I'm not talking about some more errors. As usual, most of the viewers are ignorant as well. For them, washing and painting is good enough.

[@JoseAntonio-kc1so]

Tienes gallinas solteras? Se oye cacarear d fondo en el vídeo. 😅

[@restorationsskills4967]

you're really funny

[@abelpadilla7789]

Maybe some new tires would look better

[@restorationsskills4967]

Thank you very much.

[@x84pav84x]

Освещение где? Разве по вашим правилам дорожного движения оно не предусмотрено? Заграждение на зубчатых колёсах впереди у руля где? И особенно огорчает то, что нет кожуха, на маховике. Вы даже не представляете, как это опасно, для жизни! Если что нибудь туда попадёт, то намотает, мгновенно! И повторяете старые ошибки, к большому сожалению. Чистите блок двигателя с открытыми отверстиями. При этом в кривошипную камеру попадает пыль, которая весьма разрушительна для кривошипно шатунного и газораспределительного механизмов. Вымыть её оттуда весьма затруднительно. Клапана регулируете на глаз, есть специальные щупы. Сломанные шпильки на топливном баке нужно высверливать до покраски а не после неё. Стартер долго нельзя крутить, сгорят обмотки. Когда заводите двигатель, рядом должно быть как минимум двое человек, которые его должны держать. Иначе можно получить тяжёлую травму. Подшипники красить совсем необязательно, от этого они хуже работают. И уж точно их не надо забивать на посадочное место молотком, для этого используются трубы, соответствующего диаметра, так как удары наносить надо по внутреннему кольцу. А так всё очень даже хорошо получилось.

[@restorationsskills4967]

Thank you for your feedback so we can better improve future products. Wishing you and your loved ones good health!

[@graemekeeley4497]

In the nineteen sixties when i was doing my Apprenticeship in the Construction Industry these little very noisy put put dump trucks were the norm scuttling around the site carrying everything from bricks to sand cement bags etc; site lifts had cages large enough to lift these little trucks to the floor levels

[@restorationsskills4967]

Thank you very much . Perhaps your country has been very developed since that period. Wishing you good health

[@nugene57]

why did he put the lug nuts on backwards ?

[@cecilcooper6210]

Why did you put the lug nuts on backwards? The bevel side goes toward the wheel. Keeps the nut from being wallered out.

[@polemicasemprecomaverdade4631]

Eu gosto de seus vídeos mas travam muito.eu não consegui ver o final da moto ,não consegui ver o final do trator eu vejo pela TV e começa a travar😢.abraços Brasil RJ

[@restorationsskills4967]

The machine works very well. you need to take a closer look. Wishing you good health

[@sueserrano4591]

Excellent Restoration Job. Beautiful!!!

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@RustyInventions-wz6ir]

Just found your channel and Subscribed. Very nice work

[@alexanderaquino6625]

Parabens a equipe e muito boa

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@geraldmiller5260]

Tires were dry rotted and different from each other.

[@robertomatos5586]

Perfeito, mas ainda está faltando lanternas e espelhos retrovisores!

[@restorationsskills4967]

Thank you very much. We'll probably improve and mount them later

[@johnpellegrini521]

Bloody good job, Well done lad's.

[@restorationsskills4967]

Thank you very much

[@nigelbeaumont1109]

That was so Half Assed. Tires?

[@anatoliinatolov4300]

самое важное втулки не заменили

[@allffl3793]

Con un motore più potente, sarebbe meglio di un camioncino, comunque bello 👌

[@restorationsskills4967]

Thank you very much.

[@user-ij2cw5sl9i]

Скоро глушак оторвет.

[@paulfellows2094]

well worth waiting for brilliant job guys you very talented man great video

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@cecilcooper6210]

You sure did it right and economical too. Much praise!

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@OGRoseStore]

вот это паровоз

[@reinaldosouza262]

Grandes profissionais da restauração de utensílios mecânicos,vocês dão nova vida ai que já parecia completamente descartado!👏👏👏👏 As 20:14,em 17/12/23🇧🇷🙌

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@markward6076]

I wouldn't use a steel hammer on bearings.

[@restorationsskills4967]

Thank you for your feedback so we can improve future products. Wishing you good health

[@cooptroop5]

Lug nuts on the wrong way????

[@andrewgrace4410]

Great work guys 😊

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@Moto-Ural]

Резина нельзя было поменять

[@scottfrancis7704]

I find these engines are very common in these videos, are these a hit and miss engine, they remote me of the old Gravely engines of the 70's because they don't have points and condenser like along with a magnet on the fly wheel. What horse power can this engine produce? Are these engines available for purchase and shipped to the USA with replacement parts list and specs for maintenance?

[@scottfrancis7704]

Sorry, They remind me of the Gravely engines

[@restorationsskills4967]

All you need to do is send us your address. We will send you everything if you want

[@Echo3_]

one brand new tire and one that died 10 years ago 😂😂

[@restorationsskills4967]

Thank you very much. perhaps it was replaced by its owner before we restored it.

[@Echo3_]

@@restorationsskills4967 true true! The rebuild is very impressive, that just caught my attention when I saw it

[@user-qy5py3sj8i]

Quedo lindo.. Pero la restauracion es pesima..ya q no tuvieron en cuenta los detalles

[@restorationsskills4967]

Why. What details make you say that to us?

[@luisazappa510]

Grandissimo lavoro e bellissimo risultato ma lo scarico non è proprio messo in una posizione molto sicura e riparata anzi è un brutto punto rimane il fatto che il restauro è stato fatto benissimo

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@user-sx8pf1gu9o]

Штоб не загибались отреж их на место поставь резиновие, отреж при самом кузове оставь места штоб закрипить в место метали,еских резиновие не будут гнутся арабан ть и не будет грязь на них собиратся

[@user-zu9jm3tv2z]

А почему на ведущей оси резина разная? Ведёт на грунт и начнёт буксовать.

[@user-zu9jm3tv2z]

Выхлопную трубу поднять выше. Изменить форму рычага КПП. А то при включении задней бьёт о кузов.

[@restorationsskills4967]

Thank you for your feedback so we can better improve future products. Wishing you and your loved ones good health!

[@ellie26cat]

Why bald tyres?

[@restorationsskills4967]

Thank

[@FranSoose-yf3ex]

To bad that this done a better job of welding / tack welds. Why didn't he do bead welding?? Not a good job on the engine rebuild either .

[@restorationsskills4967]

Thank you for your feedback so we can improve future products. Wishing you good health

[@lewerduadasslav3499]

für ein paar neue reifen hat das geld wohl nicht gereicht.

[@restorationsskills4967]

Car owners want to save costs, so we take advantage of what we can use

[@anthonysimonhough9691]

Hay guys great job. Please get yourself s a welding helmet they don’t cost much and will save your eye sight. Thanks again.

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@user-gp8gk3zr2l]

💪👏👏👏👏👏👏👏, hermoso trabajo, me encantan estos videos, me relaja de una manera genial👏👏👏👏👏👏👏👏👏🤗

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@geraldmiller5260]

You do not need the music. Video would be better without it.

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@user-fc5ol5gl6u]

Ссссууупппеееррр

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@thepubliceye]

Great, now it just needs tyres on the rear

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@martinforever11]

Excelent job boys, congratulation....👋👋👋👋👍👍👍👍

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@user-pm9oq7kc5z]

The music is not needed

[@Shplint09]

За музыку дизлайк. (музыку мы можем и сами послушать где нибудь. )

[@restorationsskills4967]

Thank you

[@captain757747]

wow what a butcher job. No dial indicator to check run out on the ring gear. No torque wrench to properly tighten out put shaft bearings. Inserts bearings by pounding the inside of bearing putting a shock load on the bearing rather than using a bearing installation tool that puts the shock load on the bearing's out side case causing no damage to the bearing. Finally tightening the axel nuts using a chisel instead of a proper axel socket and torque wrench to set proper preload. This is a great video on WHAT NOT TO DO!!!!!!!

[@robertdominiczak6523]

At last someone finally agrees with me about some of these videos.

[@noworriesmate5903]

16:45 I agree with you. However, a lot of these people don't have the money to buy all the necessary tools or a way to get specs for tighting or the proper training. He even put the lug nuts on backwards. They just use what they have. Just a thought.

[@robertrabhudsonhornet5869]

It was funny it used old rings the valves he used oil to try to lap them when he was done they didn't look eney different I bet the gears on the side I think they needed to be timed seeing him put the lug nuts on backwards lol and one good tire the other one was bold. I think this video was fake the rear end pig was not put to getter right and you see the cylinder walls lol no cross hatch all old beings I bet the rod baring was old. This is a great video showing you what not to do. Beautiful not get splinters from the wood on the stat . When he was done he was showing it off and it was funny that the dump box didn't want to go up all the way he tried two or three times to get it to go up more lol he must've fixed it when he got back with a full load it went up all the way

[@PaulHigginbothamSr]

Say Cap'n. Did ya'll notice the Tuktuk's lift cylinder hose? When he could no longer turn the cross threaded nut he put the impact gun on her. Think it will leak much?

[@PaulHigginbothamSr]

A Louisiana license in the front and a British one in the rear, do you think he will get pulled over?