Restoring my grandfathers table saw

  Рет қаралды 37,036

Mark Susak

Mark Susak

Күн бұрын

Пікірлер: 37
@Terkinstein
@Terkinstein Жыл бұрын
Beautiful job sir, you've honored your grandfather well!!!
@ramongibbs8692
@ramongibbs8692 Жыл бұрын
Your granddad should be proud of you, hopefully one of my grands follow as you did. Congratulations with honor
@jameshughes1190
@jameshughes1190 4 жыл бұрын
Outstanding video! As a grandfather myself, I really appreciate that you value the time you spent with him.
@steveknight8870
@steveknight8870 4 жыл бұрын
I’m sure he be proud to see what you did with his saw, and even prouder to see what you do with it. Came up a treat.
@MarkSusak
@MarkSusak 4 жыл бұрын
Thank you Steve
@Roosters-rants1977
@Roosters-rants1977 13 күн бұрын
That's nicer than mine. I tell people all the time. Get an older table saw and upgrade parts. The base is better than anything you buy today without spending a ton. Mine has the outfeed motor. I cleaned it up. Bought a new motor. You can upgrade to 2 and 3hp. Then I bought a new fence. The fence is where it's at. I went with the shop fox. It was much cheaper and accurate as anything else if you set it up. Has all the adjustments you need. Then you have more money for other tools. The delta cabinet saw will cost you a good penny but it has the same motor as a table top. These old saws are amazing. They just need some upgrades.
@adventuredog1864
@adventuredog1864 2 жыл бұрын
Beautiful video. I was given an old table saw that needs refurbishment and this video helped give me a lot of ideas. Enjoy making new memories on yours!
@TheGbow0704
@TheGbow0704 4 жыл бұрын
Nice to see you back Mark, always great to see things restored and used again, rather than just thrown out.
@MarkSusak
@MarkSusak 4 жыл бұрын
Hi Greg! good to hear from you! Thank you
@alanmcwilliams4264
@alanmcwilliams4264 4 жыл бұрын
You probably have done your grandpa proud, great to see an old tool brought back to life
@BuiltByChris
@BuiltByChris 4 жыл бұрын
I hope it brings you many years of enjoyment like I'm sure it did your grandfather. Love the video. Don't be a stranger.
@MarkSusak
@MarkSusak 4 жыл бұрын
Thanks Chris.
@sabicsepregi6521
@sabicsepregi6521 4 жыл бұрын
What a beautiful thing to do to honor him! Nice saw too!
@energybasics
@energybasics 2 жыл бұрын
Hey thanks for video!! I have and table saw and this is pure inspiration
@CowboyButler
@CowboyButler 4 жыл бұрын
Great work on the restoration!
@mvukkaz4899
@mvukkaz4899 4 жыл бұрын
Great work Mark
@mikeherbst1825
@mikeherbst1825 3 жыл бұрын
That rip fence looks just like the Exact-I-Rip I got with my Craftsman contractor series saw. Very nice & precise. T-slots are so handy for jigs, patterns etc.
@SMee67
@SMee67 4 жыл бұрын
Sorry for your loss, mate. I think your Grandfather would be proud of the job you did! 👌🏾 Had to chuckle when that wheel hit the ground, oops. 😆
@MarkSusak
@MarkSusak 4 жыл бұрын
Thanks Bill. I was in a state of confusion haha. Completely missed the wheel
@SMee67
@SMee67 4 жыл бұрын
@@MarkSusak Think we all have moments like that, mate... 🥴😏😆
@paulangus715
@paulangus715 4 жыл бұрын
Great to see you posting content Mark. The Table saw cleaned up really well. Thank you for sharing! Hope you get some time to enjoy using the Saw Mark!
@thegolfnut812
@thegolfnut812 3 жыл бұрын
What was that foam cleaner you used? Great that you referbished you GF's TS. Take pride that you have some of his tools.
@GT_Racer347
@GT_Racer347 3 жыл бұрын
Fantastic video. Fantastic result! Gave me that "a HA!" moment too on how to remove rust on large surfaces!!!!
@johncole9964
@johncole9964 4 жыл бұрын
Good Job. Hope it gives you many years of enjoyment. I think you'll find a single edge razor blade works better than a screwdriver to clean gunk off a metal surface.
@leedobson30
@leedobson30 4 жыл бұрын
V good clip. Great to hear from you again!! What was the Foamy Cleaning spray?
@MarkSusak
@MarkSusak 4 жыл бұрын
Thank you Lee. I'll be uploading on the regular. the foam is an automotove degreaser
@kuehnel16
@kuehnel16 2 жыл бұрын
What kind of spray foam cleaner did you use 🤔
@mitziseyfferdt3866
@mitziseyfferdt3866 4 жыл бұрын
What did you use to clean the motor?
@MarkSusak
@MarkSusak 4 жыл бұрын
I used a spray degreaser
@danluther9078
@danluther9078 2 жыл бұрын
Every time someone cleans a table saw top with a flat-blade screwdriver, God kills a puppy...
@denniswhite166
@denniswhite166 4 жыл бұрын
I can hear your grand-dad saying Well Done!!! I can also hear him saying never push wood on a table saw with your hand, use a push stick!!!
@MarkSusak
@MarkSusak 4 жыл бұрын
thank you for the kind words. i agree with the push stick. can't use the saw without all 10 digits!
@AlejandroMartinez-dn6sr
@AlejandroMartinez-dn6sr 4 жыл бұрын
😭😭😭👍💪
@danbumgarner1057
@danbumgarner1057 Жыл бұрын
In my experience rattle can paint on the throat plate will rub off on your work.
@0lliemckinnis849
@0lliemckinnis849 3 жыл бұрын
It would have been EXTREMELY HELPFUL IF HE HAD SAID WHAT HE WAS USING. The video itself won't help me restore my classic Craftsmans table saw.
@MarkSusak
@MarkSusak 3 жыл бұрын
Degreaser, vinegar, variety of coarse pads and a lot of time. I hope your craftsman comes out looking new! It’s super rewarding such a good feeling
Save Your Rusty Table Saw!
10:11
Make Everything
Рет қаралды 101 М.
1972 Delta Unisaw Table Saw Restoration
20:46
Mike Farrington
Рет қаралды 538 М.
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН
Chain Game Strong ⛓️
00:21
Anwar Jibawi
Рет қаралды 41 МЛН
I've been doing it all wrong
27:35
Bent's Woodworking
Рет қаралды 425 М.
Remove Rust from Tool Tables with WD-40, Scotch-Brite, and Sandpaper
5:22
ShorePoint Creations
Рет қаралды 133 М.
Completely Rebuilding My Old Table Saw - Part 1: The Base
28:00
Under Dunn
Рет қаралды 886 М.
Removing table saw rust SAFELY and QUICKLY
4:41
Stumpy Nubs (James Hamilton)
Рет қаралды 101 М.
From Rust To Riches - Restoring 40 Year Old Cast Iron
12:50
Woodshop Junkies
Рет қаралды 88 М.
How to clean rust from cast iron tools- and KEEP IT AWAY!
5:26
Stumpy Nubs (James Hamilton)
Рет қаралды 459 М.
How To Remove Rust From A Cast Iron Table Saw | Woodworking Projects
6:41
INGENIOUS TOOLS YOU'LL WANT TO BUY
20:54
TechZone
Рет қаралды 52 М.