Restoring Old Rusty Table Fan with Laser Cleaning

In this episode I will restore this rusty vintage fan. The fan has lots of rust and all of the wiring needs to be replaced. This project was lot of work because there were so many phases in the work.
After disassembly I started by removing the rust and paint with Laser Cleaner. The device wan loaned to me by W2M (w2m.fi/?lang=en). Here is their demo video ( • 120 w laserpuhdistimen... . For the safety guard I used electrolysis for which I've made this tutorial: • How to Remove Rust wit...
For the painted parts I used filler and filler base coat. The color is blue metallic car paint, and it was coated with 2K clear coat to protect the surface.
To remake the damaged badge prints I used heat transfer. Should I make a detailed tutorial of the process for my second channel? I printed the wanted image on a transfer paper which is linked in the tools section. It normally requires a heat press, but since I don't have one I only used normal oven and used clamps to generate the needed pressure. I also used silicone pad to make the pressure more even in case my sheets of plywood were not even enough.
I also replaced all the wiring vintage style braided wire was used for the part that had similar wire and the rest of the wire was just plain plastic wire like it originally was.
I hope you enjoy the video as much as I enjoyed making it. Thanks for watching!
The following links are affiliate links. By clicking them you are directed to a amazon (or other) product page. If you purchase that or any other product I will get a small fee but you will not pay any extra. This is an easy way to support this channel and allow me to keep making these videos Thank you for watching and reading!
---------------------------------------------------------------------
Patreon: / oddtinkering
T-Shirts: teespring.com/stores/odd-tink...
Instagram: / odd.tinkering
Laser cleaner: laser.w2m.fi/laser-cleaning/?...
Some of my tools:
Black gloves: amzn.to/2YY8a09
Transfer paper: amzn.to/3k8iflm
Multi-purpose Lubricant: amzn.to/3dztAK7
Metal polishing kit: amzn.to/2ZxTDJv
Soldering Iron:amzn.to/3qH2ogq
---------------------------------------------------------------------
SUBSCRIBE ▶▶▶ kzbin.info/door/f_s...
---------------------------------------------------------------------
Restoration playlist▶ kzbin.info?list...
---------------------------------------------------------------------

[@Fryguy64]

This is the OnlyFans content I'm here for.

[@dragac90]

ahhahahaha good one

[@henry19eleven50]

Lol

[@cherrysdiy5005]

lmao

[@theredguy2670]

😂

[@fallonfireblade4404]

It took me way too long to get the joke 🤣

[@samstephanos4592]

That fan bending is like my back in the morning after I wake up

[@OddTinkering]

Haha

[@ZandomLEFT]

hi

[@Dtr146]

@@OddTinkering seen you wear gloves reminds me how important it is when working on stuff like that. You don't think a small cut would be bad but...

[@Dtr146]

Is he not going to clean or convert the leftover rust?.

[@Capitan0Guinea]

Check up your bed. You could improve a lot sleeping in a rigid straight surface.

[@Infinityand1]

My favorite part of this channel is how the loud things are quiet and the quiet things are loud. It's so relaxing to feel like I can *hear* the details, without losing my hearing on the genuinely loud stuff.

[@WTF15TH15]

Agreed. I don't care for ASMR or anything like that, but this... this is art.

[@AshwinRathod-ss5ob]

​@@WTF15TH15😊😊😊

[@husseinqotnaa130]

ذؤمم

[@cecilofchristmaspast4186]

*Opens rotor box, sees organic lifeform inside* Odd: "Everything is fine."

[@ajdrig]

That's really annoyed me, Can't believe he left it in that condition.

[@nofreenamestoreg]

yeah, fixing this would have made the fan quieter and way less vibration.

[@raflidiot]

@@ajdrig agree

[@gonzo8744]

nofreenamestoreg I was thinking exactly the same thing

[@drewsof]

Now let's check the gear box. Checked.

[@thedemonicstudio39]

The people who made thin fan the 50s would be proud to see this.

[@CaptainFordoArc77]

There probably dead ngl lol

[@HisVirusness]

@@CaptainFordoArc77 There's gotta be a couple that are still alive.

[@a_daapota45]

@@HisVirusness yep

[@daneshat7795]

They are most likely in their 80s or 90s. Not sure they would be on KZbin lol

[@HisVirusness]

@@daneshat7795 No, but their great great grandkids probably have KZbin, so they can show them this video. :)

[@vincentvalentine6999]

Ducktor : where's my soapy bath?? Odd : you got it.. Ducktor covered with rust.. 😭

[@ms.pirate]

VINNY!!!!!

[@ms.pirate]

🖤🖤🖤

[@bobjacobs8643]

No worries, a stand-in stunt Ducktor was used.

[@FBI-vp9bc]

I feel nad to ducktor 😳😳

[@Carterthielftw_]

As someone advocating for Right to Repair, this stuff peaks my interest. I think it's so cool that you can make something so old useful again, rather than throwing it out.

[@frankmurphy5]

I'll always fix something first if I can, and these types of videos have really broadened my horizons regarding what I would consider "fixable". Love it.

[@thecianinator]

Piques, not peaks

[@ireallyreallyhategoogle]

It was interesting, but all my fans stop working because of the motor, and he didn't do anything to the motor, so my guess is the fan worked before he started restoring it. It was rusty and not up to modern code, but it still worked.

[@rexjolles]

@@ireallyreallyhategoogle wires maybe

[@rexjolles]

These things usually work even in garbage shape

[@raulthetacoking1544]

3:04 people who would connect markers together to make a sword: FINALLY A WORTHY OPPONENT OUR BATTLE WILL BE LEGENDARY

[@gustavouchida1]

ahahahahahahaha

[@professor_jordan]

you could sell one of those for like 500 caps

[@Full-stack33]

Nah the screws,gears and metal is more useful 😄😄

[@atillaEryavuz]

oh another fallout fan(pun intended) i see.

[@willowscottling]

@@Full-stack33 Right? I need to upgrade my shotgun. :)

[@JasonSawyer]

The Ducktor must consider you a brother to let you use his hot tub like that. He's a kind soul.

[@RadioactiveLavaLamp]

when he put those extensions on his screwdriver it reminded me of when we were little kids and we would make swords out of markers by connecting their caps to other markers

[@jdanieldulos2220]

I sense that there will be a lot of fan puns. Hope they don't blow.

[@alexdavies273]

Lol made my day thanks

[@jdanieldulos2220]

@@alexdavies273 or night

[@damacaroniboy9720]

@@jdanieldulos2220 he knows whether it is day or night and not u

[@jdanieldulos2220]

@@damacaroniboy9720 or does he? **vsauce theme plays**

[@OddTinkering]

Haha, it looks like there will be plenty

[@Stoudman]

Me: You definitely don't want to put your finger anywhere near that blade. Odd Tinkering: Here's what would happen to your finger.

[@wurly164]

Stoudman your finger is the least of your worries, don’t walk near it naked

[@theextremeanimator4721]

@@wurly164 uh...no one would do that

[@JohnDoe-wq5eu]

@@wurly164 Yeah I kind of read that as this is what would happen to your "finger". I mean it's a carrot, a bit big for a finger.

[@sophiegrey9576]

I really like the wave-like patterns that show up on camera while using the laser cleaning. It's so cool.

[@Toasterlovescrocs]

Shinx pfp :0

[@Neinka]

The laser work was amazing, I didn't know something like that exists.

[@b9android384]

This looks like something I would immediately scrap for parts in Fallout 4

[@Full-stack33]

I was thinking that exact same thing 🤣

[@bara555]

Im replaying FO4 atm, and got so happy when I saw the generic fan not getting scrappd for once

[@thequietkid0_]

fallout 4 desk fan

[@Fuji086]

Good source for screws.

[@galacticcakegameplays6601]

@@Fuji086 don't forget steel

[@yura_rach]

16:26 when everything is bad but you pretend everything is good

[@Phil451]

I wish he had replaced the grease lol

[@Gkitchens1]

Me, after opening it and seeing the disaster inside: "were gonna just close this and pretend we didn't see that. I'm sure it's fine. Nope. It isn't."

[@craisins95]

"I'm not sure this video will be my thing--" *brings out the laser* "I want to clean stuff with a laser"

[@orangessmeel245]

My dad likes to say"Use the right tool for the job," then would follow up with"It is usually the closest tool." It is my favorite thing

[@Noah_Ropp]

Ducktor’s in!

[@yocapo32]

Much to his chagrin.

[@knskumo]

Small comment. Once it has be opened and , why not cleaning the motor/stator and re-greasing parts?

[@samellowery]

Yeah i usually like his work but it just seems like he half assed some of this but then again I don't make vids on KZbin 🤷🏻‍♂️

[@Bhoney5]

@@samellowery my favorite restoration channel is my mechanics. Doesn't half-ass anything. Doesn't miss a single thing, gotta love it

[@scolopede]

I feel the stress leave when I see parts get oiled. I used to take old grease out of the gearboxes but now, if I see the grease is still translucent, I simply re-saturate it with the best synthetic electric motor oil I could find and mix it up while in the gear box.

[@calebmoak186]

I used to watch thesw videos in my dorm room to calm my nerves before public speaking class. Its so relaxing.

[@ecyor0]

Yknow, after that little demo at the end, this is definitely a case where the shift to plastic was for the best XD

[@KarinExMachina]

Maybe... maybe... had to make sure idiots wouldn't stick their fingers in a fan I guess.... no its more likely that the shift to plastic was because they found ways to make stronger plastic which wouldn't shatter as soon as you turned it on. Plastic being lighter.. means a less heavy duty motor and a less heavy item overall and less power consumption

[@DrPonk]

@@KarinExMachina And that you can put more of it on the cover so idiots and children don't stick their fingers into a fan, right?

[@KarinExMachina]

@@DrPonk Pretty simple yeah

[@ireallyreallyhategoogle]

Nah, metal blades are still better, but now the grill is tight enough you can't put your finger anywhere near the blades.

[@paranaenselol]

As vezes eu boto meu dedo no ventilador nem dói

[@joshua646646]

Brings back childhood memories. We didn’t have A/C in our house back in the 60’s but we surely did have these fans everywhere.

[@sealouse]

I love the sense of humor that comes through purely in the editing. It's genius, and I get to watch rust get blasted off by a laser. Who could want for anything else

[@EliasIT]

You uploaded your first video in 2017 and still have a fan from the 1950's.... i will see myself out, thank you

[@DarkTripods07]

Its like you went back in time and bought it brand new. Nicely job on it.

[@RichieRouge206]

As a fan collector this was amazing and highly appreciated!! You did such an incredible job and the metallic blue finish is stunning. Well done

[@savonmcleod7265]

You have a cool hobby

[@Meracog]

Fan collecting is a thing? That's pretty rad.

[@_Julie_Bee]

Let me be the millionth person to say you are a fan fan 🙃🤠

[@rexjolles]

@@Meracog people collect all kinds of crap even fire alarms

[@brutsie_xurkitree]

Screw: is placed super difficult OT's Screwdriver Attachments: Our time has come.

[@nehdoll]

I wish my screwdriver sped up like that.

[@Amateur-fitness]

I love the process you use for getting the rust off of metal and I also like the Nickel plating process you do with handheld electronics amongst other things.

[@annson24]

This is the most boring thing I've ever watched yet I've watched the whole thing. And I loved every second of it!

[@wileycoyotesr8623]

When I was a kid, grandparents had a similar fan. It had pretty colored ribbons tied to the inner ring of the fan guard. They blew forward when the fan was running. I have that memory.

[@mvg2235]

It’s almost midnight but I need to watch

[@treyanderson6254]

Same

[@driftingthruspace]

same

[@AlexsanderCesar112]

in the country where i live is 4:30 am

[@mlodziutki6253]

In my country it's 8.30 AM

[@3vorp]

Same

[@boo4580]

Perfect videos, no talking, no epic music, nothing. You can make a asmr video of you fixing something and it well blow up

[@GippyHappy]

That lazer cleaning bit was tops. It looked magical.

[@nataliakozbial2434]

The strength he put in to unscrew those screws lol

[@nataliakozbial2434]

I love when you restore gaming stuff, but this is epic as well :)

[@OddTinkering]

It's fun to do all sorts of projects and that keeps it challenging and interesting for me as well

[@nataliakozbial2434]

@@OddTinkeringAll of you content is awesome!

[@walmartdog1142]

I never watch the game restoration vids.

[@jasonschumacher1412]

@@walmartdog1142 I'm currently glaring at you for saying that

[@RestoreTechnique]

It's videos like this that remind me why OddT has 2M subscribers. The filming, the repair quality, the patience, the personality. Brilliant!

[@XDTheBestGamer]

The laser cleaning tool is so fine that you have to look cool to use it properly, that's why they give you sunglasses (Haters will say it's for eye protection or some bs)

[@planejet42]

That came out nice! It might've been a good idea to replace the grease in the gear housing while you had it all disassembled.

[@projektkobra2247]

Looked like old ear wax...probably fulla crud.

[@rickmcdonald1557]

Yes I'm glad to see someone else noticed that~!!!! Also he used what looked to be dollar store scissors to cut the sheet metal.

[@TysyTube]

Awesome video👍

[@blairmartinez1]

TysyTube????????????????????????????????'

[@didaraksa779]

TysyTube Restoration??!!!?!?!

[@Jack-lt1su]

Here before this blows up!

[@Wastefulpine9]

U guy's should Collab

[@DinnerForkTongue]

@Damian Salcedo-Cuadros You don't need sharp blades to cut air.

[@TheRagingSpartan534]

I'm only 16 years old and I like old classic stuff like this well thanks to my dad who showed me things like this

[@erics423]

I can't get enough of your show "you bring the dead back to life" keep up the GOOD work

[@DyslexicMitochondria]

What can I say...I'm a big FAN of your videos

[@sterlingarcher8041]

lolol

[@gamesforlife2670]

The fan puns Odd tinkering you did this to your comment section

[@hdezn26]

Moar Fan engagement means KZbin will promote his videos more!

[@jennatimm7426]

Odd tinkering AND Tysytube uploading in the same day????? I'm blessed

[@buckets5284]

Boomers: "Everything was made better and safer in the good old days!!!" 1950s death trap fan: 22:45

[@SamLemont]

Better yes, safer no. No one I've ever talked too has said shit was safer. You think a fan made today will work some 70 years later?

[@pumpkineater629]

Back in the day there was a thing called personal accountability, ya know that thing where you recognize the risk and take actions to prevent accidents. Ie don't run the cord so someone could trip over it or don't stick your fingers in it while it's running.

[@KingSolidTails]

Better yes, but not safer. Companies weren't making their products with the intention of them breaking apart in a few months so the consumer will have to purchase a new one, they made their products to last

[@ioncewasdead]

When I worked ER a gentleman came in who had his fan next to his bed blowing on him while he was sleeping. It had open blades I guess and he tossed and turned... and his hand landed in the fan and ended up quite lacerated. Nice fan... but would need to be really responsibly used.

[@numsiskit]

A lot of mid century stuff is really sturdy. Seriously. Furniture from that time all weighs 4000 lbs.

[@TheGemini5]

Wow, I almost expected to feel the breeze through the screen! That was great!!

[@jonesingaround3260]

My grandparents had an old fan alot like this one. And I swear you can't find fans that put off air like these anymore

[@brightplaysgames8760]

Or remove fingers

[@solinus7131]

Unless you go with the more expensive models, perhaps.

[@Cazammaf]

I have an old plastic table fan and the oscillate function doesn’t work anymore but it is still more powerful and cools me down more than any other new fan that I’ve bought. Dunno why

[@pumpkineater629]

You can find those rather easily at antique stores. The one I'm currently using is an Emerson 16" circa 1945. Works great too

[@alexdavies273]

Everyone: bored in quarantine Odd tinkering: I sense bored has struck time to upload Not the hero we deserved but the one we needed

[@alexdavies273]

Yay I got a heart thanks odd tinkering 😊😁

[@LollipopUnicorny]

I thought quarantine is over

[@victorjeffers1993]

My Grandmother had an old fan like that one when I was very young ! When she got elderly she had alzheimer's an we had someone to come an stay with her at her home one night they up an quit an left when later we found some things were missing an the fan was one of the items taken ! Glad to see you restore one like she had ! Awesome !

[@tburrrg2502]

I feel like products these days aren’t as high of quality as they once were. I don’t see anyone fixing up a plastic fan anytime soon. nice job on this

[@jackmaxpower]

That’s because fans like that cost you a arm and a leg I found the prices back then and let me just say they weren’t cheap.

[@5in1killa]

Would you pay $237 for a table fan? They were $16 in 1926 and with inflation it's quite a bit of money.

[@jackmaxpower]

@@5in1killa what I’m saying

[@70sman]

I fixed up my plastic fan recently. But then again, I'm a cheapskate.

[@mikeasminelly]

In Brazil we restore, because most of us don't have money to buy another one lol

[@DumplingProductions]

This looks like something I’d see in a haunted Pizzeria.

[@trashmann1081]

or a post apocalyptic wasteland

[@svnsetsomnia8280]

so THIS was what was eating up all my power

[@solinus7131]

>Haunted pizzeria Hmmm…

[@tylerforman3671]

if you know you know

[@mirandakreta5917]

The fan... *shudders*

[@ForgottenShineRestoration]

On Saturday morning shortly after getting up a new restoration video ?! Great, I'll take a look at that now ...

[@diana_bird]

This guy could leave something straight from the damn Titanic as good as new. It’ amazing.

[@arthurcharest9061]

After you showed it working I said “that could definitely take off a finger” then your video immediately cuts to the carrot test 😂, bravo!

[@Vulpix4025]

I've always loves seeing restorations of old and even ancient and even old antique items getting fixed up to look and work like new.

[@xxPenjoxx]

A coworker recently started speaking with me more after recognising my 'Trust me, I'm a Ducktor' t-shirt. You're famous! 😁

[@piratefangirl6802]

tHeRe ArE sHiRtS?!? GUESS WHOS GONNA IMPULSE BUY 1!!!!

[@OddTinkering]

Haha, it's actually really nice to hear that I've been part of that

[@hdezn26]

@@piratefangirl6802 Where? I'll have to check it out!

[@piratefangirl6802]

@@hdezn26 I didn’t realize it till now either! Here’s the link my dude: teespring.com/stores/odd-tinkering-2

[@jasonschumacher1412]

@@piratefangirl6802 I would get the mug and leave it in my docs office

[@MrsAlexisAgnew2019]

I have a fan EXACTLY like this (albeit a bit smaller) that I inherited from my grandma. It has sat on top of my fridge since 2017 when I received it, so I’m excited to see a similar one being given new life! There’s life in these old items still!

[@savarini9077]

He is the chosen one,who will bring balance to the world of motors

[@yelhsasokolova8561]

Ducktor needs to be in one of those Dawn dish soap commercials now 😭😭

[@Timothygruenbacher]

Each one of these videos feel like that one part in Toy Story 2 when the old guy cleans Woody with his 82 compartments.

[@FiaraGC]

I think I could watch that laser metal cleaner all day.

[@Drpokok90]

Very satisfying. I often play your videos on background when I'm working my office work. Lol

[@WombatMuffler]

I dont understand, you put ALL THIS EFFORT into the rebuild, even thought it might have been in a flood, then you DON'T clean out and replace the old grease . That is like rebuilding a car engine, then just reusing the used oil you drained out. I like the rebuild, but it is hard to overlook that.

[@jl3390]

And he's afraid to remove the stator just because of a little welding??!! Those old wires are a fire waiting to happen. Amateurish.....

[@DavidPlass]

Agreed. I was shocked that it was opened, turned, closed.

[@Explaiin]

I was looking for this comment. What was he thinking

[@xMrsmileyfacex]

I feel the same way that Wombat does. It seems silly not to clean and regrease the gearbox.

[@dolanddrumpf6344]

Expectations are high for Odd Tinkering.

[@BojarskyLeGrand]

This fingers cutter is really made to last. You restored it pretty well.

[@SangheiliSpecOp]

was thinking the same thing

[@theatlanticlove]

✨anxiety✨

[@TheNerdyVixen]

That laser is so cool!! I just love how meticulous you are with every step. I could watch you work for hours!

[@left4mike129]

Idk about you guys but that initial snap of the rusty screw breaking loose is so satisfying...

[@lilacocto9103]

Those screws probably haven't been removed since the thing came off the assembly line

[@KD-bk7gd]

This is even more satisfying than usual with that laser.

[@cialaxx7674]

At 8:12 I was like: I don't question anything anymore this man does. Everything just turns out amazing in the end

[@AlexanderL23]

I can't stop watching your vids, that fan looks fantastic

[@SoupyMittens]

I have this exact model of fan, only in black. Only the high power mode works, and it shoots out rust and shit when it's running, but I've left it on continuously for 3 years now without a single issue. Things were built to last back then.

[@ryanwells7596]

Another fan here. You've blown me away with another great restoration.

[@yesman3993]

Egg

[@MsPepperbelly]

That lazer cleaner looks like something out of a Sci Fi movie from the 50s, seems appropriate.

[@adewight5667]

I had visions of Sean Connery as Bond lol

[@vanpenguin22]

That classic Dodge Dart blue is a superb color choice

[@acpatinojr7]

That laser... Almost looks like VFX. So cool!

[@jasonulloa]

10:53 Captions: Yummy Ducktor: WHY HAVE YOU DONE THIS TO ME

[@bluestranger8246]

Finally! Something worth to watch.

[@tenshiato]

It's such a beautiful thing knowing that someone has handmade this years ago and it's getting some love after.

[@Dankbudsupercrystals]

Dude fixes anything. You sir are something else.

[@UltimatelyEverything]

Odd Tinkering is restoring his fans now finally he listened to people in the comments section and that blew me away. I forgot i made this comment and it made me laugh when i found it 😂😂

[@thecianinator]

What did he go back and fix the gearbox?

[@ignivite3592]

Is-is that a pun

[@xlivtheman]

Thanks for the laugh mate.

[@UltimatelyEverything]

@@xlivtheman You're welcome lol

[@MetalRestorationBho]

Awesome video. Good job bro

[@theandy4667]

restoration channels hyping each other up is so cute

[@StarNate2112]

Thank you for turning this fan into the ship from “Flight of The Navigator!”

[@karrahklinger2573]

0:42 When I saw him struggle with those rusty screws a voice in my head said 'he needs the WD-40 in there!' and I honest to god internally cheered when he whipped out the aforementioned WD-40 😂

[@ODSTD56]

16:03 Is all that gunk in there the old lubricant? Shouldn't that be replaced for new lubricant?

[@mannycb]

I have little experience with fans and others, but I maybe it might be still good as long as it doesn't dry up, when the fan moves it will loosen the lube a bit more. but you may be right, I'm not sure.

[@fantaolli1099]

you'd have to clean out the old grease which is just time consuming and unnecessary if it hasn't dried up

[@thecianinator]

Yes, it should. The fan would run a lot smoother if he had done that.

[@Julzilla]

Ever wondered why the 'High' setting is always next to off? It's to stop the electric motor stalling and burning it out! The more you know :)

[@RedstonePyroMan]

It's a brushed motor right? What part receives strain when there is current running through and it doesn't rotate?

[@eduams1]

I also like Technology Connections

[@Julzilla]

@@RedstonePyroMan kzbin.info/www/bejne/noKWeIptobt1jbs

[@magicmanhs7718]

Not always my friend

[@SilvaDreams]

@@magicmanhs7718 Nah fan motors have been designed like this for about 100 years now, it's to ensure the fan during it's heaviest load (start up) has the most power going to it to ensure it starts spinning and doesn't burn out the motor as the motor is even cooled by the fan itself. So if it fails to start from a low power position it can easily over heat and burn.

[@javito_destroyer]

Idk why but this is satisfying, I'm glad I found this channel

[@ledrat]

Sou um fã do Brasil. Muito legal esse canal, adoro assistir essas restaurações ❤️

[@THEWORKSSHOP]

I am definitely interested in seeing the process of the heat transfer paper. I can think of lots of uses for that. Great video!

[@selay333]

Tired and bored at work. This’ll wake me up.

[@OddTinkering]

If your boss asks just say you have my permission to watch 😌

[@selay333]

My boss would probably watch it as well :P.

[@JuneBreand]

I like watching your repair-stuff video before I going to sleep. It is fun. Hope can see more video in future. Thanks you.😀

[@scorpio21184]

I love the 1950s look and blue is my favourite colour, so I love this! I find these videos so soothing, so thanks for making them.

[@lagoa22]

Seu trabalho é incrível, saudações aqui do Brasil 👏👏

[@thesoupin8or673]

Big fan (lol) of mechanical content like this! Would have liked to see the inside stuff restored too, or at least cleaned. I like to see gearboxes disassembled and stuff. Also, always love to see the laser cleaner get some exercise, so well done there

[@Icylawnmowers]

11:01 looks like a movie shot when he sticks his hand in

[@SurpriseMechanics]

An electric fan with metal blades that are barely covered, spinning at high speed. This is quintessential 50's-60's American design. Safety first!

[@vallynwolfe]

That "click" when a screw gets removed for the first time in its life.

[@HappyBear376]

The Laser is a great bit of kit.

[@dmv073]

You are a bad ass! Your videos are truly well done and captivating! Your sense of humor is amazing my friend! No words need to be said all your captions are freaking hilarious! Can’t wait to look at all your videos!

[@lordieshepherd]

I’ve always loved these old fans