Volvo XC60 2009-2015 | Bi-Xenon HID Headlight Projector Upgrade installation

Volvo XC60 2000-2015, Bi-xenon projector instructions video.
Year 2009, 2010, 2011, 2012, 2013, 2014 and 2015 model.
𝗬𝗼𝘂 𝗰𝗮𝗻 𝗯𝘂𝘆 𝘁𝗵𝗶𝘀 𝗴𝗿𝗲𝗮𝘁 𝘂𝗽𝗴𝗿𝗮𝗱𝗲 𝗸𝗶𝘁 𝗵𝗲𝗿𝗲:
retrofitlab.co...
𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 𝗼𝗳 𝗮 𝗕𝗶-𝘅𝗲𝗻𝗼𝗻 𝗽𝗿𝗼𝗷𝗲𝗰𝘁𝗼𝗿 𝗿𝗲𝘁𝗿𝗼𝗳𝗶𝘁 𝗸𝗶𝘁:
• Much better light output
• Double high beam (xenon + halogen)
• No glare
• Lower energy consumption (35 watt instead of 55 watt)
• Luxury OEM look
𝗧𝗵𝗶𝘀 𝗸𝗶𝘁 𝘄𝗶𝗹𝗹 𝗳𝗶𝘁 𝗼𝗻:
• Volvo XC60 (2009 - 2015)
𝗖𝗵𝗲𝗰𝗸 𝗼𝘂𝘁 𝗼𝘂𝗿 𝗻𝗲𝘄 𝗙𝗮𝗰𝗲𝗯𝗼𝗼𝗸 𝗴𝗿𝗼𝘂𝗽:
/ europeanheadlightcommu...
𝗙𝗶𝗻𝗱 𝘂𝘀 𝗼𝗻:
Facebook: / retrofitlab
Messenger: www.m.me/Retro...
Instagram: / retrofitlab.com_official
Our website: www.retrofitla...
𝗢𝘂𝗿 𝗦𝘁𝗼𝗿𝘆:
Retrofitting refers to the addition of new technology or features to older systems. These days there are a lot of people who put a simple plug & play xenon kit in their halogen headlight housing in an attempt to improve night vision and looks of their vehicle. In fact they don’t realize that their headlight beams are often worse than before. Night vision achieves relatively little improvement on night vision because of a poor beam pattern, which increases the blinding of other road users. This is because their headlight housings are designed for halogen and not xenon.
A true Bi-Xenon projector update is now possible for your car. Such an upgrade will significantly improve your light output from 700-2100 lumens to 2800 and 3500 lumens, without blinding other traffic with glare from your headlight. Upgrade your headlight OEM style!
The latest high power Led bulbs will upgrade both the exterior and interior lighting system of your car. Led lighting is becoming more and more popular in the automotive market for obvious reasons. They have longer lifetime, use less energy and improve safety with their fast response time.
Do you have any questions? Do not hesitate to contact us, we are happy to help you out!
Good luck with your retrofit!
These products are not ECE-approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage.
#Volvo #XC60 #VolvoXC60 #Aharon #Retrofit #DIY #Upgrade #Headlight #lighting #HID
#Retrofit #LED #custom #improvement

[@lucasilva7546]

Firstly, I would like to congratulate them for the excellent work performed to perfection. I would also suggest them to show in their videos how each flashlight works at the end of all the work. Unfortunately we do not have such work performed with such perfection and quality here in Brazil, not that I demean my country, but here we have very serious problems with regard to skilled labor. When we find someone who is minimally qualified and able to perform certain services, they charge exorbitant amounts.

[@MidniteLiquid]

I love it! This makes the retrofit I'm doing to the lights on my 2011 XC70 T6 with mini D2S projectors look hard, which it really has been. Trimming the shrouds and aligning the projectors is not so fun.

[@ali-ascentsayder5641]

I watched all your videos.spectacular informational videos.I made my own car looking at this video.thank you very much for your efforts.good work for you.

[@nauticaimports4085]

Hi, Great job as always! It can't get more OEM than that. Please make a step by step video of 2012+ face lifited Mercedes C180. Thanks in advance!

[@tunphengchang534]

Hi bro , how u clear the old silicone ? Any good solution with that ???

[@Retrofitlab]

The best way is to keep reheating it constantly and scraping it with a flat screwdriver. Patience is required as well.

[@tunphengchang534]

@@Retrofitlab thanks for advise . Ya the old silicone gum really quite hard tough to clean….

[@koklessssss]

what is the black band which you close the lights? thanks. really good job

[@hectormilanez5562]

Hello great job question tho .. I have a s60 2014 non Hid . Now if I do this retrofit and install H.I.D will the car give me a error code ? And will the HID work with out burning the car electronics ??? Thanks

[@lonerangerdj]

Can you made a Video to chanche the Projectors for a Volvo V50 Facelift (2008-2012)?

[@G0L0UD54]

When you are removing material with the dremel, what exactly are you removing? Are these raised portions or are you enlarging the opening?

[@ArifKamaruzaman]

Really nice looking.

[@Retrofitlab]

Thanks!

[@ericj.nyuliah864]

could you please make a video for upgrading to bi led projector?

[@Retrofitlab]

Hi Eric, As for now we do not have an installation video for the BI-LED projector or plan to make one, though the installation process is almost the same. If you have any questions on the installation, please dont hesitate to contact us at. [e-mail]

[@Phen0mable]

And they don't leak after some time right?

[@aeriographer2131]

does this work on the 2015 headlights? I would like to buy a pair and send to you for my wifes car??

[@kindelevgeniy3856]

Please tell me the temperature of the hot air gun? Thank you in advance!

[@Retrofitlab]

We use a setting of 300 Degrees Celsius for 12-18 minutes / 1st lowest setting, depending on the size of the headlight.

[@2017jman]

Can you please just do this for my 2010 Volvo S80? I would pay good money for projector HIDs. Unfortunately it's the worst trying to find a pair of OEM

[@KA7Beatz]

How long was the heating fan running and how high was the temperature?

[@Retrofitlab]

In general, 2 methods are used, with both methods, be careful and patient. Method 1 is using a regular oven. Preheat the oven at 200 degrees Celsius. When ready, switch off the oven and place the headlight inside. Make sure that the headlight is not touching any metal of the oven by placing a cloth over the grid, for example. Leave the headlight in the oven for 10-15 minutes before opening it. If the headlight kit is not yet soft enough, put the headlight in the oven for a bit more time. Method 2 (this one) is suitable for larger headlights that do not fit in a regular oven, or if your lovely wife absolutely does not allow car parts to be baked in her kitchen. A large cardboard box is used where hot air is blown through a heatgun. Make sure that the hot air of the heatgun does not blow directly to the headlight, place the headlight on small elevations so that the air can circulate properly through the box. We use a setting of 300 Degrees Celsius for 12-18 minutes / 1st lowest setting, depending on the size of the headlight.

[@KA7Beatz]

@@Retrofitlab Awesome. Thanks for the detailed response!

[@Retrofitlab]

@@KA7Beatz Glad to help :-)

[@br5an1]

Do you have a set of headlights for 2013 xc 60???

[@Retrofitlab]

Hi, Unfortunately, we do not sell complete headlight assemblies, only projector upgrade kits.

[@jazz1ba]

Which led bulb did you install to the turn signal socket? Is there hyperflash with led bulb there?

[@Retrofitlab]

These can be used: retrofitlab.com/products/pwy24w-led-amber?_pos=2&_sid=73e7793f3&_ss=r&variant=40348591718552 There should not be any hyperflashing with these bulbs.

[@GameManiakBR]

nice work, i've just buy a projetor, but i need to find that glue you put on the headlight. do you know the name?

[@ericj.nyuliah864]

butyl rubber glue

[@lucasilva7546]

Would you kindly refer me to a sales site that has a good quality xenon kit with a temperature around 4300K? I live in Brazil, so it would be interesting for me a website like Ebay for example. Thank you in advance for your attention!

[@ttvstabthatguy4u284]

Are these still available and ship to the US?

[@Retrofitlab]

Yes, these are still available and we ship to the USA. With UPS shipping you will receive your order within a week.

[@loukasstylianou1]

Can you please make a video for the Ford Focus MK2?

[@Alex1552project]

I live in America.....would love to do this to my 2016 Volvo V60.....let me know what I need to do?

[@Alex1552project]

+Retrofitlab Hi Retrofitlab.....can you give me a price to supply the parts plus shipping to Nevada

[@wilbertalexander2864]

so I've got a ford fusion with aftermarket headlights and I was just wondering if it would be possible to install bi xenon halo on them or if I'd have to revert to the oem headlights

[@stevelane1956]

Ford Fusion......ha ha ha ha!

[@fa15al71]

can you make one for 2008 chevy malibu LS?

[@nta2010nta]

Please help me how i can install projector for jetta mk6 - 2011-2016

[@artcore9886]

Hey what are those red clips called at 6:10 to splice the wires together?

[@artcore9886]

Thanks

[@flipporabasta]

how long do you bake the lights with the heatgun?

[@ericj.nyuliah864]

8 to 10 minutes at 220 degrees F

[@jarmohusso5827]

Looks easy :)

[@mdmannan.9705]

very nice Sar

[@yavuzlu]

Can you make one from Punto MK3

[@flipporabasta]

ive been trying for ages to separate my s60 2005 headlights.

[@flipporabasta]

Ok. Thanks. What effect dö you use on The gun?

[@flipporabasta]

I mean how hot do you set the heatgun when putting it in The box.

[@flipporabasta]

i made a wooden box (similar to yours), and set the heat to 330celcius for 15min. but it wouldnt come loose at all :(

[@flipporabasta]

***** at last i manage to separate them :D the glue on the volvo xenon houses from 2007 seems alot harder than any housing you have video on.

[@trungle9923]

Cool mod but i would do an active bending

[@ΓεώργιοςΠαππάς-σ6ξ]

hi, the projectors of Peugeot 407 can work with bi-xenon? thank you.

[@ΓεώργιοςΠαππάς-σ6ξ]

+Retrofitlab yes I heard a lot of people who install xenon bulbs just like that. but as I saw your job, which is excellent, I just wanna have your opinion. thank you

[@ΓεώργιοςΠαππάς-σ6ξ]

+Retrofitlab The 407 projectors is OK? because they came with halogen bulbs

[@motorstickernlermelo]

Yes you can use the standard reflectors if you want.

[@krzwin2806]

Witam jaka LED żarówka do kierunkowskazów

[@krzwin2806]

Dziękuję

[@gazzaoco]

Don't look like it's worth all that trouble

[@garym0ikw214]

OGFG....................